| # Copyright 2003, 2004, 2005 |
| # Free Software Foundation, Inc. |
| |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 2 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software |
| # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| |
| # Please email any bugs, comments, and/or additions to this file to: |
| # bug-gdb@prep.ai.mit.edu |
| |
| # This file was written by Jason Molenda (jmolenda@apple.com) |
| |
| if $tracelevel then { |
| strace $tracelevel |
| } |
| |
| set prms_id 0 |
| set bug_id 0 |
| |
| set testfile "a.out" |
| set binfile ${objdir}/${subdir}/${testfile} |
| |
| set timeout 30 |
| |
| set arch "i386" |
| if [target_info exists darwin64] { |
| set arch "x86_64" |
| } |
| if [istarget "powerpc-apple-darwin*"] { |
| set arch "ppc" |
| } |
| |
| remote_exec build "sh ${srcdir}/${subdir}/../set-up-objdir.sh ${srcdir}/${subdir} ${objdir}/${subdir}" |
| |
| remote_exec build "make ARCH=${arch} -C ${objdir}/${subdir} stage1" |
| |
| load_lib mi-support.exp |
| set MIFLAGS "-i=mi1" |
| |
| gdb_exit |
| mi_gdb_start |
| mi_delete_breakpoints |
| mi_gdb_reinitialize_dir $srcdir/$subdir |
| mi_gdb_load ${binfile} |
| |
| if [mi_run_to_main] then { |
| fail "small c fix and continue MI tests suppressed" |
| return -1 |
| } |
| |
| mi_next "first next" |
| |
| |
| # Build a new b.c |
| |
| |
| remote_exec build "make ARCH=${arch} -C $objdir/$subdir stage2" |
| |
| # mi_gdb_test "shell make ARCH=${arch} -C $objdir/$subdir stage2" ".*gcc.*b.o.*b-bundlized.o.*b.o.*\\^done" "make version 2 of b.c" |
| |
| mi_gdb_test "38-file-fix-file $objdir/$subdir/b-bundlized.o2 $objdir/$subdir/b.c" ".*38\\^done,replaced-functions=\\\[\\\]" "Bring in fixed b.c version 2" |
| |
| |
| # Step down into a combination of to-be-fixed and not-to-be-fixed functions. |
| |
| |
| mi_gdb_test "-exec-step" ".*" "step into bar()" |
| |
| mi_gdb_test "32-stack-list-frames 0 0" "32\\^done.*\"bar\".*" "verify that we're in bar()" |
| |
| mi_next "next over print statement" |
| mi_next "next over increment" |
| |
| mi_gdb_test "-exec-step" ".*" "step into fred()" |
| mi_gdb_test "34-stack-list-frames 0 0" "34\\^done.*\"fred\".*" "verify that we're in fred()" |
| |
| mi_next "step over fred print statement" |
| |
| mi_gdb_test "-exec-step" ".*" "step into slurry()" |
| |
| mi_gdb_test "35-stack-list-frames 0 0" "35\\^done.*\"slurry\".*" "verify that we're in slurry()" |
| |
| |
| # Build a new verison of b.c |
| |
| |
| remote_exec build "make ARCH=${arch} -C $objdir/$subdir stage3" |
| |
| # mi_gdb_test "shell make ARCH=${arch} -C $objdir/$subdir stage3" ".*gcc.*b.o.*b-bundlized.o.*b.o.*\\^done" "make version 3 of b.c" |
| |
| mi_gdb_test "838-file-fix-file $objdir/$subdir/b-bundlized.o3 $objdir/$subdir/b.c" ".*838\\^done,replaced-functions=\\\[\{thread-id=\"1\",replaced=\\\[frame=\{level=\"2\",addr=\"$hex\",fp=\"$hex\",func=\"bar\",file=\"b.c\",line=\"2\[67\]\",dir=\".*\"\},frame=\{level=\"0\",addr=\"$hex\",fp=\"$hex\",func=\"slurry\",file=\"b.c\",line=\"40\",dir=\".*\"\}\\\]\}\\\]" "Bring in fixed b.c version 3" |
| |
| mi_gdb_test "183-thread-set-pc 1 b.c:36" ".*183\\^done,frame=.*,func=\"slurry\",.*line=\"40\".*" "Set \$pc to the new slurry" |
| |
| remote_exec build "make ARCH=${arch} -C $objdir/$subdir stage21" |
| |
| mi_gdb_test "839-file-fix-file $objdir/$subdir/b-bundlized.o21 $objdir/$subdir/b.c" ".*839\\^done,replaced-functions=\\\[\{thread-id=\"1\",replaced=\\\[frame=\{level=\"2\",addr=\"$hex\",fp=\"$hex\",func=\"bar\",file=\"b.c\",line=\"2\[67\]\",dir=\".*\"\},frame=\{level=\"0\",addr=\"$hex\",fp=\"$hex\",func=\"slurry\",file=\"b.c\",line=\"40\",dir=\".*\"\}\\\]\}\\\]" "Bring in fixed b.c version 21" |
| |
| mi_gdb_test "213-thread-set-pc 1 b.c:62" ".*213\\^done,frame=.*,func=\"slurry\",.*line=\"62\".*" "Set \$pc to the new slurry" |
| |
| mi_gdb_test "840-break-insert static_printer" ".*840\\^done,bkpt.*" "set breakpoint in static_printer #1" |
| |
| mi_gdb_test "841-exec-continue" ".*stopped.*" "continue into static_printer" |
| |
| |
| remote_exec build "make ARCH=${arch} -C $objdir/$subdir stage22" |
| |
| mi_gdb_test "842-file-fix-file $objdir/$subdir/b-bundlized.o22 $objdir/$subdir/b.c" ".*842\\^done,replaced-functions=.*" "Bring in fixed b.c version 22" |
| |
| # mi_gdb_test "843-break-insert static_printer" ".*843\\^done,bkpt.*" "set breakpoint in static_printer #2" |
| |
| mi_gdb_test "844-thread-set-pc -f 1 b.c:51" ".*844\\^done,frame=.*,func=\"static_printer\",.*line=\"51\".*" "Set \$pc to the new static_printer" |
| |
| mi_gdb_test "845-exec-finish" ".*hi there.*especially when picbase.*this should upset things.*" "finish out of static_printer, look for correct strings (picbase register setup test)" |
| |
| |
| gdb_exit |
| |
| return 0 |