clang-tests/gdb-1472-testsuite/src/dejagnu/example/hello/README

Understanding the runtest script in DejaGnu

    Philip A. Wilsey
    Clifton Labs, Inc
    philip.wilsey@cliftonlabs.com

    September 26, 2001



DejaGnu is a tcl program to help run test scripts for batch and
interactive programs.  If you have not yet read the DejaGnu
documentation don't, read this document first and play with this
example.  If you have, you have my sympathies.  Hopefully this document
and example will provide a high level overview of what goes on in
runtest.  You will still have to read the DejaGnu documentation.  It
contains many details of the low level functions and operation that I do
not address in this document.

FIRST: I AM NOT A DEJAGNU OR TCL EXPERT.  I have simply spent the past
week studying and trying to understand the execution behavior of the
runtest script.  As part of my studies I built the accompanying example
that you may (or may not) find helpful in understanding just what is
going on with the runtest script.  Fortunately tcl is a pretty simply
language and a quick scan of Ousterhout's text on tcl has been more than
sufficient for me to conduct these experiments.  Again, this document
only records my observations.

SECOND: I am not interested in or concerned with testing
cross-compilation systems or anything exotic like remote execution.  I
was/am simply interested in using a test harness in a general purpose
conformance suite.  Consequently I have not examined all the switches
and variable related to -host_board, -target, or remote execution.  I
was simply trying to gain an overall understanding of what and when the
various tcl/expect files and procedures are executed.

THIRD: There are really two parts to my studies, specifically: (i) the
study of runtest, and (ii) the use of the auto- tools to realize a
"make check" target that will invoke the runtest script for you.  As a
result, this document is organized into three parts:

    Part I: An overview of runtest
    Part II: Building a "make check" target with automake
    Part III: Running the example

For small projects, you may not be interested in the autoconf/automake
tools and can safely skip Part II of this document.

FOURTH: This example is setup only for recording the files and
procedures that runtest uses.  Technically it will compile a simple c++
hello world program, however the test system does not verify it's
operation.  If you run make check, it will simply dump out a bunch of
DEBUG statements and exit.  Please don't expect anything more.

FINALLY: For many years now we have been managing our regression suite
using hand rolled perl scripts that require continual maintenance.  We
turned to DejaGnu in hopes to reduce some of our efforts in this
direction.  Unfortunately, I found understanding DejaGnu to be very
painful and at several times during my study I was ready to chuck it
all.  Now that I have a better understanding of the system, I believe
that in the long run I will be much happier that I stuck with it.
Hopefully you will think so as well.

NOTE: I have only used/studied runtest on a Debian Linux box.  I do not
know how well this knowledge will generalize or be useful to you.
Please use at your own risk.



PART I: AN OVERVIEW OF RUNTEST
------------------------------

I.1 The essence of Runtest
--------------------------

runtest is designed to be run from a test subdirectory where all tests
are stored in subdirectories with a naming convention of TOOL.TESTNAME.
Subdirectories not conforming to the TOOL.TESTNAME naming convention are
not examined.  runtest examines recursively all the subdirectories under
each TOOL.TESTNAME subdirectories for expect scripts to be executed (it
assumes that everything with the ".exp" suffix is an expect script).  It
will then attempt to execute every expect script it finds.  For example,
let's take a look at the contents of the helloworld.* subdirectories in
the testsuite subdirectory of this example:

    peabody>ls -R testsuite/helloworld.test*
    ~/test/dejagnu/helloDemo
    testsuite/helloworld.test1:
    total 8
       4 helloworld.test1-1/     4 test1.exp

    testsuite/helloworld.test1/helloworld.test1-1:
    total 4
       4 test1-1.exp

    testsuite/helloworld.test2:
    total 8
       4 test2.exp     4 test3.exp

    testsuite/helloworld.test3:
    total 12
       4 config/     4 lib/     4 non_compliant_dir_name/

    testsuite/helloworld.test3/config:
    total 4
       4 config.exp

    testsuite/helloworld.test3/lib:
    total 4
       4 lib.exp

    testsuite/helloworld.test3/non_compliant_dir_name:
    total 4
       4 non_compliant.exp
    peabody>

Once everything is setup, issuing the command "runtest" from the
testsuite subdirectory on my machine causes all of the expect scripts to
be executed in this order:

    Running ./helloworld.test1/helloworld.test1-1/test1-1.exp ...
    Running ./helloworld.test1/test1.exp ...
    Running ./helloworld.test2/test2.exp ...
    Running ./helloworld.test2/test3.exp ...
    Running ./helloworld.test3/non_compliant_dir_name/non_compliant.exp ...

Looks like a depth first search; however, I can find nothing in the
documentation that indicates that a specific order will be followed.  So
you should not count on it.  Also notice that the TOOL.TESTNAME naming
convention is only enforced at the root directory from where the runtest
command is issued -- beneath the first level subdirectories all
subdirectories except those named "lib" and "config" are examined for
expect scripts.

I.2 The nuts and bolts of Runtest
---------------------------------

A few more points.  runtest is setup to look for scripts to load for
configuration information and runtime procedures.  In many cases if
runtest cannot find a script it will continue.  Four important tcl
procedures that you should define (in testsuite/lib/TOOL.exp) are:

    TOOL_init
    TOOL_finish
    TOOL_exit
    TOOL_version

TOOL_init is called prior to running each expect script it locates under
the testsuite subdirectory.  runtest invokes TOOL_finish after executing
each expect script.  TOOL_exit is invoked after TOOL_finish for the last
expect script executes.  Finally TOOL_version is invoked to allow the
testsute to report the version of the tool that was just tested.

If you want to add tool specific arguments on the on the runtest command
line you can also define:

    TOOL_option_proc
    TOOL_option_help

TOOL_option_proc is invoked as runtest parses the command line
arguments.  TOOL_option_help is invoked when runtest is invoked with the
"-help" command line argument (this is actually pretty cool).

In general runtest will take the following steps (the expect scripts
named in these steps are named relative to the directory where the
runtest command is issued):

1. It will look for and load the file ~/.dejagnurc for command line
   options.  I have not experimented with this and cannot comment on
   what can and cannot be placed in this file.
2. It will try to load load the file ./site.exp (if you use automake,
   this file will be automagically created for you).  Technically this
   file is organized into two parts, one that is set when the .configure
   script is executed; the second part can be edited and changed by the
   user.
3. It will try to load the file ./lib/TOOL.exp (this is probably a good
   place to locate definitions for the TOOL_init/TOOL_exit/TOOL_version
   procedures.
4. It will try to load some configuration files.  Specifically
4a. It will try to load a base-config.exp file.  On my system it
    searches, in order, the following subdirectories:
        ./config
        ./../config
        ./../../config
        ./../../../config
4b. It will try to load a system specific configuration file.  I believe
    you can/should use this to setup different configuration information
    for various operating systems that the test suite is to run in.  On
    my system it searches, in order, for (the search is terminated after
    the first success):
        ./config/unix.exp
        ./config/gnu.exp
        ./config/default.exp
        ./config/unknown.exp
        ./../config/unix.exp
        ./../config/gnu.exp
        ./../config/default.exp
        ./../config/unknown.exp
        ./../../config/unix.exp
        ./../../config/gnu.exp
        ./../../config/default.exp
        ./../../config/unknown.exp
        ./../../../config/unix.exp
        ./../../../config/gnu.exp
        ./../../../config/default.exp
        ./../../../config/unknown.exp
5. Now it will recursively search the ./TOOL.* subdirectories and for
   each expect script it locates it will:
5a. Invoke the procedure TOOL_init giving the relative pathname where
    the expect script is found as an argument.
5b. Run the expect script.
5c. Invoke the proecture TOOL_finish with no arguments.
6. After running all of the located expect script it will invoke the
   TOOL_exit procedure.
7. Next the TOOL_version procedure is invoked.
8. Finally, runtest exits.

That's it.  Sadly it took me almost a week to learn this....


I.3 Some notes I made during my week of study
---------------------------------------------

1. site.exp is loaded twice.  Why?  I have no clue.

2. As far as I can tell the "testsuite" name is completely artificial.
   runtest does not appear to depend on it.  The autoconf/automake
   family also do not seem to depend on it.

3. Searching for files to load: There is a method to this madness.
   However, it's not very regular: for example why does 4a not look into
   the testsuite subdirectory and 4b does.

3a. Look into srcdir (where the runtest command was issued) for
    lib/tool.exp; I guess the principle concept is to put tool specific
    and platform independent expect scripts here.

3b. Next look for for platform scripts in --srcdir/config (on my linux
    system it looks for one of unix.exp, gnu.exp, and default.exp (in
    this order and stops with the first one it finds).

    My confusion on the search patterns of runtest is magnified by the
    fact that I am trying to issue the runtest command from outside the
    testsuite subdirectory....don't do this.

4. Executing expect scripts.

4a. If an expect script is named on the command line it (and only it) is
    run.  otherwise....

4b. runtest looks in the testsuite directory and does a glob on
    TOOL.*/*.exp (ok, it's a recursive glob TOOL.*/.../*.exp) and
    executes all expect script it sees (ok, it appears to ignore all
    subdirectories named "lib" or "config").  Before execution of each
    script, runtest invokes TOOL_init with the relative path (relative
    to where the directory where the runtest command was issued) name of
    that script as it's only argument.  After execution of each script
    runtest invokes TOOL_finish with no arguments.

5. load_lib: load_lib is a tcl script in the DejaGnu system that you can
   use to load tcl/expect files.  It has an odd search path.  In
   particular, on my machine, the search path is:

5a. the dejagnu install directory (/usr/share/dejagnu) and its
    accompanying library directory (/usr/share/dejagnu/lib)
5b. in a dejagnu/lib directory one above the current directory (where
    runtest was run).  that is in ../dejagnu/lib
5c. in the --srcdir lib
5d. in the directory where runtest was issued
5e  and this is the funny one, in a dejagnu/lib directory two directories
    above (../../dejagnu/lib).

6. hmmmm how does DEJAGNULIBS alter the library search path??  I did not
   investigate this.

7. COOL: I can name an expect script in the --ignore command line option
   to prune it from the set of scripts that are executed.


I.4 Some gotchas
----------------

1. As far as I can tell the "testsuite" name is completely artificial
   and you can store your tests in whatever subdirectory name you like.

2. Don't try to issue the runtest command from outside the testsuite
   subdirectory using the "--srcdir target" command line argument.
   Unless you really know what's going on, it will cause you grief.  For
   some reason the runtest will look for some things in the $target
   location and for others it will look in the directory where the
   runtest command was issued.

3. The search paths used to look for things varies all over the places.
   The system has tremendous configurability for building and
   controlling the expect scripts.  However the flexibility for
   controlling what and where things are loaded by runtest is really
   quite limited.  For example, site.exp must be located in the
   directory where the runtest command is issued.  I can discover no way
   to alter its location.



PART II: BUILDING a "make check" TARGET WITH AUTOMAKE
-----------------------------------------------------

NOTE: before I began this study I did not know anything about
autoconf/automake and friends (I still don't).

1. If you understand these tools it's really quite simple.  In the
   directory containing the testsuite you must have a Makefile.am to
   build the "make check" target.  You only need to define the dejagnu
   option for AUTOMAKE_OPTIONS.  If you want you can also add runtest
   command line arguments to the RUNTESTDEFAULTFLAGS variable.

   The only problem I had with this was realizing that the Makefile.am
   to locate these definitions in is the one located *in* the testsuite
   subdirectory.  DO NOT make these definitions in the root Makefile.am
   file (unless you intend to place you TOOL.* subdirectories there).

2. I cannot figure out a good way to add alternate check targets (e.g.,
   make check-test1) to run alternate tests on the command line.  Since
   I really don't know automake very well, this could very likely be
   very easy to do, but my ignorance prevents me from discovering how.
   Presently I have simply defined the alternate target by hand (see
   make check-demo in the testsuite/Makefile.am file).


PART III: RUNNING THE EXAMPLE
-----------------------------

The example contains a bunch of expect/tcl files, some of them are
unused (actually I don't believe I ever used anything outside of
standard tcl in any of my scripts).  I created this example to explore
what was going on so you will see, for example, unix.exp in the lib,
testsuite/lib, and testsuite/config subdirectories.  I did this to learn
where things were loaded from.  Consequently you should *not* use my
setup to build a testing framework from.  This system should only be
used to discover the runtime behaviors of runtest.

To build this example, you will need a system configured with a c++
compiler and the autoconf and automake tools installed.  With these
tools in place, the build procedure is simply:

    autoconf
    aclocal
    automake
    ./configure
    make check

Pretty much that's it (you may or may not need the aclocal step).  After
the ./configure, the makefile in the testsuite subdirectory has two
relevant targets, namely:

    make check
    make check-demo

Good Luck.