| -- C954013.A |
| -- |
| -- Grant of Unlimited Rights |
| -- |
| -- Under contracts F33600-87-D-0337, F33600-84-D-0280, MDA903-79-C-0687, |
| -- F08630-91-C-0015, and DCA100-97-D-0025, the U.S. Government obtained |
| -- unlimited rights in the software and documentation contained herein. |
| -- Unlimited rights are defined in DFAR 252.227-7013(a)(19). By making |
| -- this public release, the Government intends to confer upon all |
| -- recipients unlimited rights equal to those held by the Government. |
| -- These rights include rights to use, duplicate, release or disclose the |
| -- released technical data and computer software in whole or in part, in |
| -- any manner and for any purpose whatsoever, and to have or permit others |
| -- to do so. |
| -- |
| -- DISCLAIMER |
| -- |
| -- ALL MATERIALS OR INFORMATION HEREIN RELEASED, MADE AVAILABLE OR |
| -- DISCLOSED ARE AS IS. THE GOVERNMENT MAKES NO EXPRESS OR IMPLIED |
| -- WARRANTY AS TO ANY MATTER WHATSOEVER, INCLUDING THE CONDITIONS OF THE |
| -- SOFTWARE, DOCUMENTATION OR OTHER INFORMATION RELEASED, MADE AVAILABLE |
| -- OR DISCLOSED, OR THE OWNERSHIP, MERCHANTABILITY, OR FITNESS FOR A |
| -- PARTICULAR PURPOSE OF SAID MATERIAL. |
| --* |
| -- |
| -- OBJECTIVE: |
| -- Check that a requeue is cancelled and that the requeuing task is |
| -- unaffected when the calling task is aborted. |
| -- Specifically, check requeue to an entry in a different task, |
| -- requeue where the entry has parameters, and requeue with abort. |
| -- |
| -- TEST DESCRIPTION: |
| -- Abort a task that has a call requeued to the entry queue of another |
| -- task. We do this by sending two messages to the Distributor which |
| -- requeues them to the Credit task. In the accept body of the Credit |
| -- task we wait for the second message to arrive then check that an |
| -- abort of the second message task does result in the requeue being |
| -- removed. The Line Driver task which generates the messages and the |
| -- Credit task communicate artificially in this test to arrange for the |
| -- proper timing of the messages and the abort. One extra message is |
| -- sent to the Debit task to ensure that the Distributor is still viable |
| -- and has been unaffected by the abort. |
| -- |
| -- This series of tests uses a simulation of a transaction driven |
| -- processing system. Line Drivers accept input from an external source |
| -- and build them into transaction records. These records are then |
| -- encapsulated in message tasks which remain extant for the life of the |
| -- transaction in the system. The message tasks put themselves on the |
| -- input queue of a Distributor which, from information in the |
| -- transaction and/or system load conditions forwards them to other |
| -- operating tasks. These in turn might forward the transactions to yet |
| -- other tasks for further action. The routing is, in real life, dynamic |
| -- and unpredictable at the time of message generation. All rerouting in |
| -- this model is done by means of requeues. |
| -- |
| -- |
| -- CHANGE HISTORY: |
| -- 06 Dec 94 SAIC ACVC 2.0 |
| -- 25 Nov 95 SAIC Fixed shared global variable problems for |
| -- ACVC 2.0.1 |
| -- |
| --! |
| |
| with Report; |
| with ImpDef; |
| |
| procedure C954013 is |
| |
| |
| -- Arbitrary test values |
| Credit_Return : constant := 1; |
| Debit_Return : constant := 2; |
| |
| |
| protected type Shared_Boolean (Initial_Value : Boolean := False) is |
| procedure Set_True; |
| procedure Set_False; |
| function Value return Boolean; |
| private |
| Current_Value : Boolean := Initial_Value; |
| end Shared_Boolean; |
| |
| protected body Shared_Boolean is |
| procedure Set_True is |
| begin |
| Current_Value := True; |
| end Set_True; |
| |
| procedure Set_False is |
| begin |
| Current_Value := False; |
| end Set_False; |
| |
| function Value return Boolean is |
| begin |
| return Current_Value; |
| end Value; |
| end Shared_Boolean; |
| |
| |
| TC_Debit_Message_Complete : Shared_Boolean (False); |
| TC_Credit_Message_Complete : Shared_Boolean (False); |
| |
| |
| type Transaction_Code is (Credit, Debit); |
| |
| type Transaction_Record; |
| type acc_Transaction_Record is access Transaction_Record; |
| type Transaction_Record is |
| record |
| ID : integer := 0; |
| Code : Transaction_Code := Debit; |
| Account_Number : integer := 0; |
| Stock_Number : integer := 0; |
| Quantity : integer := 0; |
| Return_Value : integer := 0; |
| TC_Message_Count : integer := 0; |
| TC_Thru_Dist : Boolean := false; |
| end record; |
| |
| |
| task type Message_Task is |
| entry Accept_Transaction (In_Transaction : acc_Transaction_Record); |
| end Message_Task; |
| type acc_Message_Task is access Message_Task; |
| |
| task Line_Driver is |
| entry Start; |
| end Line_Driver; |
| |
| task Distributor is |
| entry Input(Transaction : acc_Transaction_Record); |
| end Distributor; |
| |
| task Credit_Computation is |
| entry Input(Transaction : acc_Transaction_Record); |
| end Credit_Computation; |
| |
| task Debit_Computation is |
| entry Input(Transaction : acc_Transaction_Record); |
| end Debit_Computation; |
| |
| -- This protected object is here for Test Control purposes only |
| protected TC_Prt is |
| procedure Set_First_Has_Arrived; |
| procedure Set_Second_Has_Arrived; |
| procedure Set_Abort_Has_Completed; |
| function First_Has_Arrived return Boolean; |
| function Second_Has_Arrived return Boolean; |
| function Abort_Has_Completed return Boolean; |
| private |
| First_Flag, Second_Flag, Abort_Flag : Boolean := false; |
| end TC_Prt; |
| |
| protected body TC_Prt is |
| |
| Procedure Set_First_Has_Arrived is |
| begin |
| First_Flag := true; |
| end Set_First_Has_Arrived; |
| |
| Procedure Set_Second_Has_Arrived is |
| begin |
| Second_Flag := true; |
| end Set_Second_Has_Arrived; |
| |
| Procedure Set_Abort_Has_Completed is |
| begin |
| Abort_Flag := true; |
| end Set_Abort_Has_Completed; |
| |
| Function First_Has_Arrived return boolean is |
| begin |
| return First_Flag; |
| end First_Has_Arrived; |
| |
| Function Second_Has_Arrived return boolean is |
| begin |
| return Second_Flag; |
| end Second_has_Arrived; |
| |
| Function Abort_Has_Completed return boolean is |
| begin |
| return Abort_Flag; |
| end Abort_Has_Completed; |
| |
| end TC_PRT; |
| |
| -- Assemble messages received from an external source |
| -- Creates a message task for each. The message tasks remain extant |
| -- for the life of the messages in the system. |
| -- TC: The Line Driver task would normally be designed to loop |
| -- continuously creating the messages as input is received. Simulate |
| -- this but limit it to three dummy messages for this test and use |
| -- special artificial checks to pace the messages out under controlled |
| -- conditions for the test; allow it to terminate at the end |
| -- |
| task body Line_Driver is |
| Current_ID : integer := 1; |
| TC_First_message_sent: Boolean := false; |
| |
| procedure Build_Credit_Record |
| ( Next_Transaction : acc_Transaction_Record ) is |
| Dummy_Account : constant integer := 100; |
| begin |
| Next_Transaction.ID := Current_ID; |
| Next_Transaction.Code := Credit; |
| |
| Next_Transaction.Account_Number := Dummy_Account; |
| Current_ID := Current_ID + 1; |
| end Build_Credit_Record; |
| |
| |
| procedure Build_Debit_Record |
| ( Next_Transaction : acc_Transaction_Record ) is |
| Dummy_Account : constant integer := 200; |
| begin |
| Next_Transaction.ID := Current_ID; |
| Next_Transaction.Code := Debit; |
| |
| Next_Transaction.Account_Number := Dummy_Account; |
| Current_ID := Current_ID + 1; |
| end Build_Debit_Record; |
| |
| begin |
| |
| accept Start; -- Wait for trigger from main |
| |
| for i in 1..3 loop -- TC: arbitrarily limit to two credit messages |
| -- and one debit, then complete |
| declare |
| -- Create a task for the next message |
| Next_Message_Task : acc_Message_Task := new Message_Task; |
| -- Create a record for it |
| Next_Transaction : acc_Transaction_Record := |
| new Transaction_Record; |
| begin |
| if not TC_First_Message_Sent then |
| -- send out the first message to start up the Credit task |
| Build_Credit_Record ( Next_Transaction ); |
| Next_Message_Task.Accept_Transaction ( Next_Transaction ); |
| TC_First_Message_Sent := true; |
| elsif not TC_Prt.Abort_Has_Completed then |
| -- We have not yet processed the second message |
| -- Wait to send the second message until we know the first |
| -- has arrived at the Credit task and that task is in the |
| -- accept body |
| while not TC_Prt.First_Has_Arrived loop |
| delay ImpDef.Minimum_Task_Switch; |
| end loop; |
| |
| -- We can now send the second message |
| Build_Credit_Record( Next_Transaction ); |
| Next_Message_Task.Accept_Transaction ( Next_Transaction ); |
| |
| -- Now wait for the second to arrive on the Credit input queue |
| while not TC_Prt.Second_Has_Arrived loop |
| delay ImpDef.Minimum_Task_Switch; |
| end loop; |
| |
| -- At this point: The Credit task is in the accept block |
| -- dealing with the first message and the second message is |
| -- is on the input queue |
| abort Next_Message_Task.all; -- Note: we are still in the |
| -- declare block for the |
| -- second message task |
| |
| -- Make absolutely certain that all the actions |
| -- associated with the abort have been completed, that the |
| -- task has gone from Abnormal right through to |
| -- Termination. All requeues that are to going to be |
| -- cancelled will have been by the point of Termination. |
| while not Next_Message_Task.all'terminated loop |
| delay ImpDef.Minimum_Task_Switch; |
| end loop; |
| |
| |
| -- We now signal the Credit task that the abort has taken place |
| -- so that it can check that the entry queue is empty as the |
| -- requeue should have been cancelled |
| TC_Prt.Set_Abort_Has_Completed; |
| else |
| -- The main part of the test is complete. Send one Debit message |
| -- as further exercise of the Distributor to ensure it has not |
| -- been affected by the cancellation of the requeue. |
| Build_Debit_Record ( Next_Transaction ); |
| Next_Message_Task.Accept_Transaction ( Next_Transaction ); |
| end if; |
| end; -- declare |
| end loop; |
| |
| exception |
| when others => |
| Report.Failed ("Unexpected exception in Line_Driver"); |
| end Line_Driver; |
| |
| |
| |
| |
| task body Message_Task is |
| |
| TC_Original_Transaction_Code : Transaction_Code; |
| This_Transaction : acc_Transaction_Record := new Transaction_Record; |
| |
| begin |
| |
| accept Accept_Transaction (In_Transaction : acc_Transaction_Record) do |
| This_Transaction.all := In_Transaction.all; |
| end Accept_Transaction; |
| |
| -- Note the original code to ensure correct return |
| TC_Original_Transaction_Code := This_Transaction.Code; |
| |
| -- Queue up on Distributor's Input queue |
| Distributor.Input ( This_Transaction ); |
| -- This task will now wait for the requeued rendezvous |
| -- to complete before proceeding |
| |
| -- After the required computations have been performed |
| -- return the Transaction_Record appropriately (probably to an output |
| -- line driver) |
| null; -- stub |
| |
| -- For the test check that the return values are as expected |
| if TC_Original_Transaction_Code /= This_Transaction.Code then |
| -- Incorrect rendezvous |
| Report.Failed ("Message Task: Incorrect code returned"); |
| end if; |
| |
| if This_Transaction.Code = Credit then |
| if This_Transaction.Return_Value /= Credit_Return or |
| This_Transaction.TC_Message_Count /= 1 or not |
| This_Transaction.TC_Thru_Dist then |
| Report.Failed ("Expected path not traversed"); |
| end if; |
| TC_Credit_Message_Complete.Set_True; |
| else |
| if This_Transaction.Return_Value /= Debit_Return or |
| This_Transaction.TC_Message_Count /= 1 or not |
| This_Transaction.TC_Thru_Dist then |
| Report.Failed ("Expected path not traversed"); |
| end if; |
| TC_Debit_Message_Complete.Set_True; |
| end if; |
| |
| exception |
| when others => |
| Report.Failed ("Unexpected exception in Message_Task"); |
| |
| end Message_Task; |
| |
| |
| |
| -- Dispose each input Transaction_Record to the appropriate |
| -- computation tasks |
| -- |
| task body Distributor is |
| |
| begin |
| loop |
| select |
| accept Input (Transaction : acc_Transaction_Record) do |
| -- Show that this message did pass through the Distributor Task |
| Transaction.TC_Thru_Dist := true; |
| |
| -- Pass this transaction on the the appropriate computation |
| -- task |
| case Transaction.Code is |
| when Credit => |
| requeue Credit_Computation.Input with abort; |
| when Debit => |
| requeue Debit_Computation.Input with abort; |
| end case; |
| end Input; |
| or |
| terminate; |
| end select; |
| end loop; |
| |
| exception |
| when others => |
| Report.Failed ("Unexpected exception in Distributor"); |
| end Distributor; |
| |
| |
| |
| -- Computation task. |
| -- Note: After the computation is performed in this task and the |
| -- accept body is completed the rendezvous in the original |
| -- message task is completed. |
| task body Credit_Computation is |
| Message_Count : integer := 0; |
| begin |
| loop |
| select |
| accept Input ( Transaction : acc_Transaction_Record) do |
| -- Perform the computations required for this transaction |
| -- |
| null; -- stub |
| |
| -- The rest of this code is for Test Control |
| -- |
| if not Transaction.TC_Thru_Dist then |
| Report.Failed |
| ("Credit Task: Wrong queue, Distributor bypassed"); |
| end if; |
| if Transaction.code /= Credit then |
| Report.Failed |
| ("Credit Task: Requeue delivered to the wrong queue"); |
| end if; |
| |
| -- for the test plug a known value and count |
| Transaction.Return_Value := Credit_Return; |
| -- one, and only one message should pass through |
| if Message_Count /= 0 then |
| Report.Failed ("Aborted Requeue was not cancelled -1"); |
| end if; |
| Message_Count := Message_Count + 1; |
| Transaction.TC_Message_Count := Message_Count; |
| |
| |
| -- Having done the basic housekeeping we now need to signal |
| -- that we are in the accept body of the credit task. The |
| -- first message has arrived and the Line Driver may now send |
| -- the second one |
| TC_Prt.Set_First_Has_Arrived; |
| |
| -- Now wait for the second to arrive |
| |
| while Input'Count = 0 loop |
| delay ImpDef.Minimum_Task_Switch; |
| end loop; |
| -- Second message has been requeued - the Line driver may |
| -- now abort the calling task |
| TC_Prt.Set_Second_Has_Arrived; |
| |
| -- Now wait for the Line Driver to signal that the abort of |
| -- the first task is complete - the requeue should be cancelled |
| -- at this time |
| while not TC_Prt.Abort_Has_Completed loop |
| delay ImpDef.Minimum_Task_Switch; |
| end loop; |
| |
| if Input'Count /=0 then |
| Report.Failed ("Aborted Requeue was not cancelled -2"); |
| end if; |
| -- We can now complete the rendezvous with the first caller |
| end Input; |
| or |
| terminate; |
| end select; |
| end loop; |
| exception |
| when others => |
| Report.Failed ("Unexpected exception in Credit_Computation"); |
| end Credit_Computation; |
| |
| |
| |
| -- Computation task. |
| -- Note: After the computation is performed in this task and the |
| -- accept body is completed the rendezvous in the original |
| -- message task is completed. |
| task body Debit_Computation is |
| Message_Count : integer := 0; |
| begin |
| loop |
| select |
| accept Input (Transaction : acc_Transaction_Record) do |
| -- Perform the computations required for this message |
| -- |
| null; -- stub |
| |
| -- The rest of this code is for Test Control |
| -- |
| if not Transaction.TC_Thru_Dist then |
| Report.Failed |
| ("Debit Task: Wrong queue, Distributor bypassed"); |
| end if; |
| if Transaction.code /= Debit then |
| Report.Failed |
| ("Debit Task: Requeue delivered to the wrong queue"); |
| end if; |
| |
| -- for the test plug a known value and count |
| Transaction.Return_Value := Debit_Return; |
| -- one, and only one, message should pass through |
| Message_Count := Message_Count + 1; |
| Transaction.TC_Message_Count := Message_Count; |
| end Input; |
| or |
| terminate; |
| end select; |
| end loop; |
| exception |
| when others => |
| Report.Failed ("Unexpected exception in Debit_Computation"); |
| |
| |
| end Debit_Computation; |
| |
| |
| begin -- c954013 |
| |
| Report.Test ("C954013", "Abort a task that has a call requeued"); |
| |
| Line_Driver.Start; -- start the test |
| |
| -- Wait for the message tasks to complete before calling Report.Result. |
| -- Although two Credit tasks are generated one is aborted so only |
| -- one completes, thus a single flag is sufficient |
| -- Note: the test will hang here if there is a problem with the |
| -- completion of the tasks |
| while not (TC_Credit_Message_Complete.Value and |
| TC_Debit_Message_Complete.Value) loop |
| delay ImpDef.Minimum_Task_Switch; |
| end loop; |
| |
| Report.Result; |
| |
| end C954013; |