<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
    "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
<head>
  <meta name="generator" content=
  "HTML Tidy for Linux/x86 (vers 12 April 2005), see www.w3.org" />

  <title>Motivation</title>
  <meta http-equiv="Content-Type" content=
  "text/html; charset=us-ascii" />
  </head>

<body>
  <div id="page">
    <h1>Motivation</h1>

    <p>Many fine associative-container libraries were already
    written, most notably, the STL's associative containers. Why
    then write another library? This section shows some possible
    advantages of this library, when considering the challenges in
    <a href="introduction.html">Introduction</a>. Many of these
    points stem from the fact that the STL introduced
    associative-containers in a two-step process (first
    standardizing tree-based containers, only then adding
    hash-based containers, which are fundamentally different), did
    not standardize priority queues as containers, and (in our
    opinion) overloads the iterator concept.</p>

    <h2><a name="assoc" id="assoc">Associative Containers</a></h2>

    <h3><a name="assoc_policies" id="assoc_policies">More
    Configuration Choices</a></h3>

    <p>Associative containers require a relatively large number of
    policies to function efficiently in various settings. In some
    cases this is needed for making their common operations more
    efficient, and in other cases this allows them to support a
    larger set of operations</p>

    <ol>
      <li>Hash-based containers, for example, support look-up and
      insertion methods (<i>e.g.</i>, <tt>find</tt> and
      <tt>insert</tt>). In order to locate elements quickly, they
      are supplied a hash functor, which instruct how to transform
      a key object into some size type; <i>e.g.</i>, a hash functor
      might transform <tt>"hello"</tt> into <tt>1123002298</tt>. A
      hash table, though, requires transforming each key object
      into some size-type type in some specific domain;
      <i>e.g.</i>, a hash table with a 128-long table might
      transform <tt>"hello"</tt> into position 63. The policy by
      which the hash value is transformed into a position within
      the table can dramatically affect performance (see <a href=
      "hash_based_containers.html#hash_policies">Design::Associative
      Containers::Hash-Based Containers::Hash Policies</a>).
      Hash-based containers also do not resize naturally (as
      opposed to tree-based containers, for example). The
      appropriate resize policy is unfortunately intertwined with
      the policy that transforms hash value into a position within
      the table (see <a href=
      "hash_based_containers.html#resize_policies">Design::Associative
      Containers::Hash-Based Containers::Resize Policies</a>).

        <p><a href=
        "assoc_performance_tests.html#hash_based">Associative-Container
        Performance Tests::Hash-Based Containers</a> quantifies
        some of these points.</p>
      </li>

      <li>Tree-based containers, for example, also support look-up
      and insertion methods, and are primarily useful when
      maintaining order between elements is important. In some
      cases, though, one can utilize their balancing algorithms for
      completely different purposes.

        <p>Figure <a href="#node_invariants">Metadata for
        order-statistics and interval intersections</a>-A, for
        example, shows a tree whose each node contains two entries:
        a floating-point key, and some size-type <i>metadata</i>
        (in bold beneath it) that is the number of nodes in the
        sub-tree. (<i>E.g.</i>, the root has key 0.99, and has 5
        nodes (including itself) in its sub-tree.) A container based
        on this data structure can obviously answer efficiently
        whether 0.3 is in the container object, but it can also
        answer what is the order of 0.3 among all those in the
        container object [<a href=
        "references.html#clrs2001">clrs2001</a>] (see <a href=
        "assoc_examples.html#tree_like_based">Associative Container
        Examples::Tree-Like-Based Containers (Trees and
        Tries)</a>).</p>

        <p>As another example, Figure <a href=
        "#node_invariants">Metadata for order-statistics and
        interval intersections</a>-B shows a tree whose each node
        contains two entries: a half-open geometric line interval,
        and a number <i>metadata</i> (in bold beneath it) that is
        the largest endpoint of all intervals in its sub-tree.
        (<i>E.g.</i>, the root describes the interval <i>[20,
        36)</i>, and the largest endpoint in its sub-tree is 99.) A
        container based on this data structure can obviously answer
        efficiently whether <i>[3, 41)</i> is in the container
        object, but it can also answer efficiently whether the
        container object has intervals that intersect <i>[3,
        41)</i> (see <a href=
        "assoc_examples.html#tree_like_based">Associative Container
        Examples::Tree-Like-Based Containers (Trees and
        Tries)</a>). These types of queries are very useful in
        geometric algorithms and lease-management algorithms.</p>

        <p>It is important to note, however, that as the trees are
        modified, their internal structure changes. To maintain
        these invariants, one must supply some policy that is aware
        of these changes (see <a href=
        "tree_based_containers.html#invariants">Design::Associative
        Containers::Tree-Based Containers::Node Invariants</a>);
        without this, it would be better to use a linked list (in
        itself very efficient for these purposes).</p>

        <p><a href=
        "assoc_performance_tests.html#tree_like_based">Associative-Container
        Performance Tests::Tree-Like-Based Containers</a>
        quantifies some of these points.</p>
      </li>
    </ol>

    <h6 class="c1"><a name="node_invariants" id=
    "node_invariants"><img src="node_invariants.png" alt=
    "no image" /></a></h6>

    <h6 class="c1">Metadata for order-statistics and interval
    intersections.</h6>

    <h3><a name="assoc_ds_genericity" id="assoc_ds_genericity">More
    Data Structures and Traits</a></h3>

    <p>The STL contains associative containers based on red-black
    trees and collision-chaining hash tables. These are obviously
    very useful, but they are not ideal for all types of
    settings.</p>

    <p>Figure <a href=
    "#different_underlying_data_structures">Different underlying
    data structures</a> shows different underlying data structures
    (the ones currently supported in <tt>pb_ds</tt>). A shows a
    collision-chaining hash-table, B shows a probing hash-table, C
    shows a red-black tree, D shows a splay tree, E shows a tree
    based on an ordered vector(implicit in the order of the
    elements), F shows a PATRICIA trie, and G shows a list-based
    container with update policies.</p>

    <p>Each of these data structures has some performance benefits,
    in terms of speed, size or both (see <a href=
    "assoc_performance_tests.html">Associative-Container
    Performance Tests</a> and <a href=
    "assoc_performance_tests.html#dss_family_choice">Associative-Container
    Performance Tests::Observations::Underlying Data-Structure
    Families</a>). For now, though, note that <i>e.g.</i>,
    vector-based trees and probing hash tables manipulate memory
    more efficiently than red-black trees and collision-chaining
    hash tables, and that list-based associative containers are
    very useful for constructing "multimaps" (see <a href=
    "#assoc_mapping_semantics">Alternative to Multiple Equivalent
    Keys</a>, <a href=
    "assoc_performance_tests.html#multimaps">Associative Container
    Performance Tests::Multimaps</a>, and <a href=
    "assoc_performance_tests.html#msc">Associative Container
    Performance Tests::Observations::Mapping-Semantics
    Considerations</a>).</p>

    <h6 class="c1"><a name="different_underlying_data_structures"
    id="different_underlying_data_structures"><img src=
    "different_underlying_dss.png" alt="no image" /></a></h6>

    <h6 class="c1">Different underlying data structures.</h6>

    <p>Now consider a function manipulating a generic associative
    container, <i>e.g.</i>,</p>
    <pre>
<b>template</b>&lt;
    <b>class</b> Cntnr&gt;
<b>int</b> 
    some_op_sequence
    (Cntnr &amp;r_cnt)
{
    ...
}
</pre>

    <p>Ideally, the underlying data structure of <tt>Cntnr</tt>
    would not affect what can be done with <tt>r_cnt</tt>.
    Unfortunately, this is not the case.</p>

    <p>For example, if <tt>Cntnr</tt> is <tt>std::map</tt>, then
    the function can use <tt>std::for_each(r_cnt.find(foo),
    r_cnt.find(bar), foobar)</tt> in order to apply <tt>foobar</tt>
    to all elements between <tt>foo</tt> and <tt>bar</tt>. If
    <tt>Cntnr</tt> is a hash-based container, then this call's
    results are undefined.</p>

    <p>Also, if <tt>Cntnr</tt> is tree-based, the type and object
    of the comparison functor can be accessed. If <tt>Cntnr</tt> is
    hash based, these queries are nonsensical.</p>

    <p>There are various other differences based on the container's
    underlying data structure. For one, they can be constructed by,
    and queried for, different policies. Furthermore:</p>

    <ol>
      <li>Containers based on C, D, E and F store elements in a
      meaningful order; the others store elements in a meaningless
      (and probably time-varying) order. By implication, only
      containers based on C, D, E and F can support erase
      operations taking an iterator and returning an iterator to
      the following element without performance loss (see <a href=
      "#assoc_ers_methods">Slightly Different Methods::Methods
      Related to Erase</a>).</li>

      <li>Containers based on C, D, E, and F can be split and
      joined efficiently, while the others cannot. Containers based
      on C and D, furthermore, can guarantee that this is
      exception-free; containers based on E cannot guarantee
      this.</li>

      <li>Containers based on all but E can guarantee that erasing
      an element is exception free; containers based on E cannot
      guarantee this. Containers based on all but B and E can
      guarantee that modifying an object of their type does not
      invalidate iterators or references to their elements, while
      containers based on B and E cannot. Containers based on C, D,
      and E can furthermore make a stronger guarantee, namely that
      modifying an object of their type does not affect the order
      of iterators.</li>
    </ol>

    <p>A unified tag and traits system (as used for the STL's
    iterators, for example) can ease generic manipulation of
    associative containers based on different underlying
    data structures (see <a href=
    "tutorial.html#assoc_ds_gen">Tutorial::Associative
    Containers::Determining Containers' Attributes</a> and <a href=
    "ds_gen.html#container_traits">Design::Associative
    Containers::Data-Structure Genericity::Data-Structure Tags and
    Traits</a>).</p>

    <h3><a name="assoc_diff_it" id="assoc_diff_it">Differentiating
    between Iterator Types</a></h3>

    <p>Iterators are centric to the STL's design, because of the
    container/algorithm/iterator decomposition that allows an
    algorithm to operate on a range through iterators of some
    sequence (<i>e.g.</i>, one originating from a container).
    Iterators, then, are useful because they allow going over a
    <u>sequence</u>. The STL also uses iterators for accessing a
    <u>specific</u> element - <i>e.g.</i>, when an associative
    container returns one through <tt>find</tt>. The STL, however,
    consistently uses the same types of iterators for both
    purposes: going over a range, and accessing a specific found
    element. Before the introduction of hash-based containers to
    the STL, this made sense (with the exception of priority
    queues, which are discussed in <a href="#pq">Priority
    Queues</a>).</p>

    <p>Using the STL's associative containers together with
    non-order-preserving associative containers (and also because
    of priority-queues container), there is a possible need for
    different types of iterators for self-organizing containers -
    the iterator concept seems overloaded to mean two different
    things (in some cases). The following subsections explain this;
    <a href="tutorial.html#assoc_find_range">Tutorial::Associative
    Containers::Point-Type and Range-Type Methods</a> explains an
    alternative design which does not complicate the use of
    order-preserving containers, but is better for unordered
    containers; <a href=
    "ds_gen.html#find_range">Design::Associative
    Containers::Data-Structure Genericity::Point-Type and
    Range-Type Methods</a> explains the design further.</p>

    <h4><a name="assoc_find_it_range_it" id=
    "assoc_find_it_range_it">Using Point-Type Iterators for
    Range-Type Operations</a></h4>

    <p>Suppose <tt>cntnr</tt> is some associative container, and
    say <tt>c</tt> is an object of type <tt>cntnr</tt>. Then what
    will be the outcome of</p>
    <pre>
std::for_each(c.find(1), c.find(5), foo);
</pre>

    <p>If <tt>cntnr</tt> is a tree-based container object, then an
    in-order walk will apply <tt>foo</tt> to the relevant elements,
    <i>e.g.</i>, as in Figure <a href="#range_it_in_hts">Range
    iteration in different data structures</a> -A. If <tt>c</tt> is
    a hash-based container, then the order of elements between any
    two elements is undefined (and probably time-varying); there is
    no guarantee that the elements traversed will coincide with the
    <i>logical</i> elements between 1 and 5, <i>e.g.</i>, as in
    Figure <a href="#range_it_in_hts">Range iteration in different
    data structures</a>-B.</p>

    <h6 class="c1"><a name="range_it_in_hts" id=
    "range_it_in_hts"><img src="point_iterators_range_ops_1.png"
    alt="no image" /></a></h6>

    <h6 class="c1">Range iteration in different
    data structures.</h6>

    <p>In our opinion, this problem is not caused just because
    red-black trees are order preserving while collision-chaining
    hash tables are (generally) not - it is more fundamental. Most
    of the STL's containers order sequences in a well-defined
    manner that is determined by their <u>interface</u>: calling
    <tt>insert</tt> on a tree-based container modifies its sequence
    in a predictable way, as does calling <tt>push_back</tt> on a
    list or a vector. Conversely, collision-chaining hash tables,
    probing hash tables, priority queues, and list-based containers
    (which are very useful for "multimaps") are self-organizing
    data structures; the effect of each operation modifies their
    sequences in a manner that is (practically) determined by their
    <u>implementation</u>.</p>

    <p>Consequently, applying an algorithm to a sequence obtained
    from most containers <u>may or may not</u> make sense, but
    applying it to a sub-sequence of a self-organizing container
    <u>does not</u>.</p>

    <h4><a name="assoc_range_it_for_find_it" id=
    "assoc_range_it_for_find_it">The Cost of Enabling Range
    Capabilities to Point-Type Iterators</a></h4>

    <p>Suppose <tt>c</tt> is some collision-chaining hash-based
    container object, and one calls <tt>c.find(3)</tt>. Then what
    composes the returned iterator?</p>

    <p>Figure <a href="#find_its_in_hash_tables">Point-type
    iterators in hash tables</a>-A shows the simplest (and most
    efficient) implementation of a collision-chaining hash table.
    The little box marked <tt>point_iterator</tt> shows an object
    that contains a pointer to the element's node. Note that this
    "iterator" has no way to move to the next element (<i>i.e.</i>,
    it cannot support <tt><b>operator</b>++</tt>). Conversely, the
    little box marked <tt>iterator</tt> stores both a pointer to
    the element, as well as some other information (<i>e.g.</i>,
    the bucket number of the element). the second iterator, then,
    is "heavier" than the first one- it requires more time and
    space. If we were to use a different container to
    cross-reference into this hash-table using these iterators - it
    would take much more space. As noted in <a href=
    "#assoc_find_it_range_it">Using Point-Type Iterators for
    Range-Type Operations</a>, nothing much can be done by
    incrementing these iterators, so why is this extra information
    needed?</p>

    <p>Alternatively, one might create a collision-chaining
    hash-table where the lists might be linked, forming a
    monolithic total-element list, as in Figure <a href=
    "#find_its_in_hash_tables">Point-type iterators in hash
    tables</a>-B (this seems similar to the Dinkumware design
    [<a href="references.html#dinkumware_stl">dinkumware_stl</a>]).
    Here the iterators are as light as can be, but the hash-table's
    operations are more complicated.</p>

    <h6 class="c1"><a name="find_its_in_hash_tables" id=
    "find_its_in_hash_tables"><img src=
    "point_iterators_range_ops_2.png" alt="no image" /></a></h6>

    <h6 class="c1">Point-type iterators in hash tables.</h6>

    <p>It should be noted that containers based on
    collision-chaining hash-tables are not the only ones with this
    type of behavior; many other self-organizing data structures
    display it as well.</p>

    <h4><a name="assoc_inv_guar" id="assoc_inv_guar">Invalidation
    Guarantees</a></h4>

    <p>Consider the following snippet:</p>
    <pre>
it = c.find(3);

c.erase(5);
</pre>

    <p>Following the call to <tt>erase</tt>, what is the validity
    of <tt>it</tt>: can it be de-referenced? can it be
    incremented?</p>

    <p>The answer depends on the underlying data structure of the
    container. Figure <a href=
    "#invalidation_guarantee_erase">Effect of erase in different
    underlying data structures</a> shows three cases: A1 and A2
    show a red-black tree; B1 and B2 show a probing hash-table; C1
    and C2 show a collision-chaining hash table.</p>

    <h6 class="c1"><a name="invalidation_guarantee_erase" id=
    "invalidation_guarantee_erase"><img src=
    "invalidation_guarantee_erase.png" alt="no image" /></a></h6>

    <h6 class="c1">Effect of erase in different underlying
    data structures.</h6>

    <ol>
      <li>Erasing 5 from A1 yields A2. Clearly, an iterator to 3
      can be de-referenced and incremented. The sequence of
      iterators changed, but in a way that is well-defined by the
      <u>interface</u>.</li>

      <li>Erasing 5 from B1 yields B2. Clearly, an iterator to 3 is
      not valid at all - it cannot be de-referenced or incremented;
      the order of iterators changed in a way that is (practically)
      determined by the <u>implementation</u> and not by the
      <u>interface</u>.</li>

      <li>Erasing 5 from C1 yields C2. Here the situation is more
      complicated. On the one hand, there is no problem in
      de-referencing <tt>it</tt>. On the other hand, the order of
      iterators changed in a way that is (practically) determined
      by the <u>implementation</u> and not by the
      <u>interface</u>.</li>
    </ol>

    <p>So in classic STL, it is not always possible to express
    whether <tt>it</tt> is valid or not. This is true also for
    <tt>insert</tt>, <i>e.g.</i>. Again, the iterator concept seems
    overloaded.</p>

    <h3><a name="assoc_methods" id="assoc_methods">Slightly
    Different Methods</a></h3>

    <p>[<a href="references.html#meyers02both">meyers02both</a>]
    points out that a class's methods should comprise only
    operations which depend on the class's internal structure;
    other operations are best designed as external functions.
    Possibly, therefore, the STL's associative containers lack some
    useful methods, and provide some other methods which would be
    better left out (<i>e.g.</i>, [<a href=
    "references.html#sgi_stl">sgi_stl</a>] ).</p>

    <h4><a name="assoc_ers_methods" id="assoc_ers_methods">Methods
    Related to Erase</a></h4>

    <ol>
      <li>Order-preserving STL associative containers provide the
      method
        <pre>
iterator 
    erase
    (iterator it)
</pre>which takes an iterator, erases the corresponding element,
and returns an iterator to the following element. Also hash-based
STL associative containers provide this method. This <u>seemingly
increases</u> genericity between associative containers, since, <i>
        e.g.</i>, it is possible to use
        <pre>
<b>typename</b> C::iterator it = c.begin();
<b>typename</b> C::iterator e_it = c.end();

<b>while</b>(it != e_it)
    it = pred(*it)? c.erase(it) : ++it;
</pre>in order to erase from a container object <tt>
        c</tt> all element which match a predicate <tt>pred</tt>.
        However, in a different sense this actually
        <u>decreases</u> genericity: an integral implication of
        this method is that tree-based associative containers'
        memory use is linear in the total number of elements they
        store, while hash-based containers' memory use is unbounded
        in the total number of elements they store. Assume a
        hash-based container is allowed to decrease its size when
        an element is erased. Then the elements might be rehashed,
        which means that there is no "next" element - it is simply
        undefined. Consequently, it is possible to infer from the
        fact that STL hash-based containers provide this method
        that they cannot downsize when elements are erased
        (<a href="assoc_performance_tests.html#hash_based">Performance
        Tests::Hash-Based Container Tests</a> quantifies this.) As
        a consequence, different code is needed to manipulate
        different containers, assuming that memory should be
        conserved. <tt>pb_ds</tt>'s non-order preserving
        associative containers omit this method.
      </li>

      <li>All of <tt>pb_ds</tt>'s associative containers include a
      conditional-erase method
        <pre>
<b>template</b>&lt;
    <b>class</b> Pred&gt;
size_type
    erase_if
    (Pred pred)
</pre>which erases all elements matching a predicate. This is
probably the only way to ensure linear-time multiple-item erase
which can actually downsize a container.
      </li>

      <li>STL associative containers provide methods for
      multiple-item erase of the form
        <pre>
size_type
    erase
    (It b, 
        It e)
</pre>erasing a range of elements given by a pair of iterators. For
tree-based or trie-based containers, this can implemented more
efficiently as a (small) sequence of split and join operations. For
other, unordered, containers, this method isn't much better than an
external loop. Moreover, if <tt>c</tt> is a hash-based container,
then, <i>e.g.</i>, <tt>c.erase(c.find(2), c.find(5))</tt> is almost
certain to do something different than erasing all elements whose
keys are between 2 and 5, and is likely to produce other undefined
behavior.
      </li>
    </ol>

    <h4><a name="assoc_split_join_methods" id=
    "assoc_split_join_methods">Methods Related to Split and
    Join</a></h4>

    <p>It is well-known that tree-based and trie-based container
    objects can be efficiently split or joined [<a href=
    "references.html#clrs2001">clrs2001</a>]. Externally splitting
    or joining trees is super-linear, and, furthermore, can throw
    exceptions. Split and join methods, consequently, seem good
    choices for tree-based container methods, especially, since as
    noted just before, they are efficient replacements for erasing
    sub-sequences. <a href=
    "assoc_performance_tests.html#tree_like_based">Performance
    Tests::Tree-Like-Based Container Tests</a> quantifies this.</p>

    <h4><a name="assoc_insert_methods" id=
    "assoc_insert_methods">Methods Related to Insert</a></h4>

    <p>STL associative containers provide methods of the form</p>
    <pre>
<b>template</b>&lt;
    <b>class</b> It&gt;
size_type
    insert
    (It b,
        It e);
</pre>for inserting a range of elements given by a pair of
iterators. At best, this can be implemented as an external loop,
or, even more efficiently, as a join operation (for the case of
tree-based or trie-based containers). Moreover, these methods seem
similar to constructors taking a range given by a pair of
iterators; the constructors, however, are transactional, whereas
the insert methods are not; this is possibly confusing.

    <h4><a name="assoc_equiv_comp_methods" id=
    "assoc_equiv_comp_methods">Functions Related to
    Comparison</a></h4>

    <p>Associative containers are parametrized by policies
    allowing to test key equivalence; <i>e.g.</i> a hash-based
    container can do this through its equivalence functor, and a
    tree-based container can do this through its comparison
    functor. In addition, some STL associative containers have
    global function operators, <i>e.g.</i>,
    <tt><b>operator</b>==</tt> and <tt><b>operator</b>&lt;=</tt>,
    that allow comparing entire associative containers.</p>

    <p>In our opinion, these functions are better left out. To
    begin with, they do not significantly improve over an external
    loop. More importantly, however, they are possibly misleading -
    <tt><b>operator</b>==</tt>, for example, usually checks for
    equivalence, or interchangeability, but the associative
    container cannot check for values' equivalence, only keys'
    equivalence; also, are two containers considered equivalent if
    they store the same values in different order? this is an
    arbitrary decision.</p>

    <h3><a name="assoc_mapping_semantics" id=
    "assoc_mapping_semantics">Alternative to Multiple Equivalent
    Keys</a></h3>

    <p>Maps (or sets) allow mapping (or storing) unique-key values.
    The STL, however, also supplies associative containers which
    map (or store) multiple values with equivalent keys:
    <tt>std::multimap</tt>, <tt>std::multiset</tt>,
    <tt>std::tr1::unordered_multimap</tt>, and
    <tt>unordered_multiset</tt>. We first discuss how these might
    be used, then why we think it is best to avoid them.</p>

    <p>Suppose one builds a simple bank-account application that
    records for each client (identified by an <tt>std::string</tt>)
    and account-id (marked by an <tt><b>unsigned long</b></tt>) -
    the balance in the account (described by a
    <tt><b>float</b></tt>). Suppose further that ordering this
    information is not useful, so a hash-based container is
    preferable to a tree based container. Then one can use</p>
    <pre>
std::tr1::unordered_map&lt;std::pair&lt;std::string, <b>unsigned long</b>&gt;, <b>float</b>, ...&gt;
</pre>which <u>hashes every combination of client and
account-id</u>. This might work well, except for the fact that it
is now impossible to efficiently list all of the accounts of a
specific client (this would practically require iterating over all
entries). Instead, one can use
    <pre>
std::tr1::unordered_multimap&lt;std::pair&lt;std::string, <tt><b>unsigned long</b></tt>&gt;, <b>float</b>, ...&gt;
</pre>which <u>hashes every client</u>, and <u>decides equivalence
based on client</u> only. This will ensure that all accounts
belonging to a specific user are stored consecutively.

    <p>Also, suppose one wants an integers' priority queue
    (<i>i.e.,</i> a container that supports <tt>push</tt>,
    <tt>pop</tt>, and <tt>top</tt> operations, the last of which
    returns the largest <tt><b>int</b></tt>) that also supports
    operations such as <tt>find</tt> and <tt>lower_bound</tt>. A
    reasonable solution is to build an adapter over
    <tt>std::set&lt;<b>int</b>&gt;</tt>. In this adapter,
    <i>e.g.</i>, <tt>push</tt> will just call the tree-based
    associative container's <tt>insert</tt> method; <tt>pop</tt>
    will call its <tt>end</tt> method, and use it to return the
    preceding element (which must be the largest). Then this might
    work well, except that the container object cannot hold
    multiple instances of the same integer (<tt>push(4)</tt>,
    <i>e.g.</i>, will be a no-op if <tt>4</tt> is already in the
    container object). If multiple keys are necessary, then one
    might build the adapter over an
    <tt>std::multiset&lt;<b>int</b>&gt;</tt>.</p>

    <p class="c1">STL non-unique-mapping containers, then, are
    useful when (1) a key can be decomposed in to a primary key and
    a secondary key, (2) a key is needed multiple times, or (3) any
    combination of (1) and (2).</p>

    <p>Figure <a href="#embedded_lists_1">Non-unique mapping
    containers in the STL's design</a> shows how the STL's design
    works internally; in this figure nodes shaded equally represent
    equivalent-key values. Equivalent keys are stored consecutively
    using the properties of the underlying data structure: binary
    search trees (Figure <a href="#embedded_lists_1">Non-unique
    mapping containers in the STL's design</a>-A) store
    equivalent-key values consecutively (in the sense of an
    in-order walk) naturally; collision-chaining hash tables
    (Figure <a href="#embedded_lists_1">Non-unique mapping
    containers in the STL's design</a>-B) store equivalent-key
    values in the same bucket, the bucket can be arranged so that
    equivalent-key values are consecutive.</p>

    <h6 class="c1"><a name="embedded_lists_1" id=
    "embedded_lists_1"><img src="embedded_lists_1.png" alt=
    "no image" /></a></h6>

    <h6 class="c1">Non-unique mapping containers in the STL's
    design.</h6>

    <p>Put differently, STL non-unique mapping
    associative-containers are associative containers that map
    primary keys to linked lists that are embedded into the
    container. Figure <a href="#embedded_lists_2">Effect of
    embedded lists in STL multimaps</a> shows again the two
    containers from Figure <a href="#embedded_lists_1">Non-unique
    mapping containers in the STL's design</a>, this time with the
    embedded linked lists of the grayed nodes marked
    explicitly.</p>

    <h6 class="c1"><a name="embedded_lists_2" id=
    "embedded_lists_2"><img src="embedded_lists_2.png" alt=
    "no image" /></a></h6>

    <h6 class="c1">Effect of embedded lists in STL multimaps.</h6>

    <p>These embedded linked lists have several disadvantages.</p>

    <ol>
      <li>The underlying data structure embeds the linked lists
      according to its own consideration, which means that the
      search path for a value might include several different
      equivalent-key values. For example, the search path for the
      the black node in either of Figures <a href=
      "#embedded_lists_1">Non-unique mapping containers in the
      STL's design</a> A or B, includes more than a single gray
      node.</li>

      <li>The links of the linked lists are the underlying
      data structures' nodes, which typically are quite structured.
      <i>E.g.</i>, in the case of tree-based containers (Figure
      <a href="#embedded_lists_2">Effect of embedded lists in STL
      multimaps</a>-B), each "link" is actually a node with three
      pointers (one to a parent and two to children), and a
      relatively-complicated iteration algorithm. The linked lists,
      therefore, can take up quite a lot of memory, and iterating
      over all values equal to a given key (<i>e.g.</i>, through
      the return value of the STL's <tt>equal_range</tt>) can be
      expensive.</li>

      <li>The primary key is stored multiply; this uses more
      memory.</li>

      <li>Finally, the interface of this design excludes several
      useful underlying data structures. <i>E.g.</i>, of all the
      unordered self-organizing data structures, practically only
      collision-chaining hash tables can (efficiently) guarantee
      that equivalent-key values are stored consecutively.</li>
    </ol>

    <p>The above reasons hold even when the ratio of secondary keys
    to primary keys (or average number of identical keys) is small,
    but when it is large, there are more severe problems:</p>

    <ol>
      <li>The underlying data structures order the links inside
      each embedded linked-lists according to their internal
      considerations, which effectively means that each of the
      links is unordered. Irrespective of the underlying
      data structure, searching for a specific value can degrade to
      linear complexity.</li>

      <li>Similarly to the above point, it is impossible to apply
      to the secondary keys considerations that apply to primary
      keys. For example, it is not possible to maintain secondary
      keys by sorted order.</li>

      <li>While the interface "understands" that all equivalent-key
      values constitute a distinct list (<i>e.g.</i>, through
      <tt>equal_range</tt>), the underlying data structure
      typically does not. This means, <i>e.g.</i>, that operations
      such as erasing from a tree-based container all values whose
      keys are equivalent to a a given key can be super-linear in
      the size of the tree; this is also true also for several
      other operations that target a specific list.</li>
    </ol>

    <p>In <tt>pb_ds</tt>, therefore, all associative containers map
    (or store) unique-key values. One can (1) map primary keys to
    secondary associative-containers (<i>i.e.</i>, containers of
    secondary keys) or non-associative containers (2) map identical
    keys to a size-type representing the number of times they
    occur, or (3) any combination of (1) and (2). Instead of
    allowing multiple equivalent-key values, <tt>pb_ds</tt>
    supplies associative containers based on underlying
    data structures that are suitable as secondary
    associative-containers (see <a href=
    "assoc_performance_tests.html#msc">Associative-Container
    Performance Tests::Observations::Mapping-Semantics
    Considerations</a>).</p>

    <p>Figures <a href="#embedded_lists_3">Non-unique mapping
    containers in <tt>pb_ds</tt></a> A and B show the equivalent
    structures in <tt>pb_ds</tt>'s design, to those in Figures
    <a href="#embedded_lists_1">Non-unique mapping containers in
    the STL's design</a> A and B, respectively. Each shaded box
    represents some size-type or secondary
    associative-container.</p>

    <h6 class="c1"><a name="embedded_lists_3" id=
    "embedded_lists_3"><img src="embedded_lists_3.png" alt=
    "no image" /></a></h6>

    <h6 class="c1">Non-unique mapping containers in the
    <tt>pb_ds</tt>.</h6>

    <p>In the first example above, then, one would use an
    associative container mapping each user to an associative
    container which maps each application id to a start time (see
    <a href=
    "../../../../testsuite/ext/pb_ds/example/basic_multimap.cc"><tt>basic_multimap.cc</tt></a>);
    in the second example, one would use an associative container
    mapping each <tt><b>int</b></tt> to some size-type indicating
    the number of times it logically occurs (see <a href=
    "../../../../testsuite/ext/pb_ds/example/basic_multiset.cc"><tt>basic_multiset.cc</tt></a>).</p>

    <p><a href=
    "assoc_performance_tests.html#multimaps">Associative-Container
    Performance Tests::Multimaps</a> quantifies some of these
    points, and <a href=
    "assoc_performance_tests.html#msc">Associative-Container
    Performance Tests::Observations::Mapping-Semantics
    Considerations</a> shows some simple calculations.</p>

    <p><a href="assoc_examples.html#mmaps">Associative-Container
    Examples::Multimaps</a> shows some simple examples of using
    "multimaps".</p>

    <p><a href="lu_based_containers.html">Design::Associative
    Containers::List-Based Containers</a> discusses types of
    containers especially suited as secondary
    associative-containers.</p>

    <h2><a name="pq" id="pq">Priority Queues</a></h2>

    <h3><a name="pq_more_ops" id="pq_more_ops">Slightly Different
    Methods</a></h3>

    <p>Priority queues are containers that allow efficiently
    inserting values and accessing the maximal value (in the sense
    of the container's comparison functor); <i>i.e.</i>, their
    interface supports <tt>push</tt> and <tt>pop</tt>. The STL's
    priority queues indeed support these methods, but they support
    little else. For algorithmic and software-engineering purposes,
    other methods are needed:</p>

    <ol>
      <li>Many graph algorithms [<a href=
      "references.html#clrs2001">clrs2001</a>] require increasing a
      value in a priority queue (again, in the sense of the
      container's comparison functor), or joining two
      priority-queue objects.</li>

      <li>It is sometimes necessary to erase an arbitrary value in
      a priority queue. For example, consider the <tt>select</tt>
      function for monitoring file descriptors:
        <pre>
<b>int</b> 
    select
    (<b>int</b> nfds,             
        fd_set *readfds,                
        fd_set *writefds,
        fd_set *errorfds, 
        <b>struct</b> timeval *timeout);
</pre>then, as the <tt>select</tt> manual page [<a href=
"references.html#select_man">select_man</a>] states:

        <p><q>The nfds argument specifies the range of file
        descriptors to be tested. The select() function tests file
        descriptors in the range of 0 to nfds-1.</q></p>

        <p>It stands to reason, therefore, that we might wish to
        maintain a minimal value for <tt>nfds</tt>, and priority
        queues immediately come to mind. Note, though, that when a
        socket is closed, the minimal file description might
        change; in the absence of an efficient means to erase an
        arbitrary value from a priority queue, we might as well
        avoid its use altogether.</p>

        <p><a href="pq_examples.html#xref">Priority-Queue
        Examples::Cross-Referencing</a> shows examples for these
        types of operations.</p>
      </li>

      <li>STL containers typically support iterators. It is
      somewhat unusual for <tt>std::priority_queue</tt> to omit
      them (see, <i>e.g.</i>, [<a href=
      "references.html#meyers01stl">meyers01stl</a>]). One might
      ask why do priority queues need to support iterators, since
      they are self-organizing containers with a different purpose
      than abstracting sequences. There are several reasons:

        <ol>
          <li>Iterators (even in self-organizing containers) are
          useful for many purposes, <i>e.g.</i>, cross-referencing
          containers, serialization, and debugging code that uses
          these containers.</li>

          <li>The STL's hash-based containers support iterators,
          even though they too are self-organizing containers with
          a different purpose than abstracting sequences.</li>

          <li>In STL-like containers, it is natural to specify the
          interface of operations for modifying a value or erasing
          a value (discussed previously) in terms of a iterators.
          This is discussed further in <a href=
          "pq_design.html#pq_it">Design::Priority
          Queues::Iterators</a>. It should be noted that the STL's
          containers also use iterators for accessing and
          manipulating a specific value. <i>E.g.</i>, in hash-based
          containers, one checks the existence of a key by
          comparing the iterator returned by <tt>find</tt> to the
          iterator returned by <tt>end</tt>, and not by comparing a
          pointer returned by <tt>find</tt> to <tt>NULL</tt>.</li>
        </ol>
      </li>
    </ol>

    <p><a href="pq_performance_tests.html">Performance
    Tests::Priority Queues</a> quantifies some of these points.</p>

    <h3><a name="pq_ds_genericity" id="pq_ds_genericity">More Data
    Structures and Traits</a></h3>

    <p>There are three main implementations of priority queues: the
    first employs a binary heap, typically one which uses a
    sequence; the second uses a tree (or forest of trees), which is
    typically less structured than an associative container's tree;
    the third simply uses an associative container. These are
    shown, respectively, in Figures <a href=
    "#pq_different_underlying_dss">Underlying Priority-Queue
    Data-Structures</a> A1 and A2, B, and C.</p>

    <h6 class="c1"><a name="pq_different_underlying_dss" id=
    "pq_different_underlying_dss"><img src=
    "pq_different_underlying_dss.png" alt="no image" /></a></h6>

    <h6 class="c1">Underlying Priority-Queue Data-Structures.</h6>

    <p>No single implementation can completely replace any of the
    others. Some have better <tt>push</tt> and <tt>pop</tt>
    amortized performance, some have better bounded (worst case)
    response time than others, some optimize a single method at the
    expense of others, <i>etc.</i>. In general the "best"
    implementation is dictated by the problem (see <a href=
    "pq_performance_tests.html#pq_observations">Performance
    Tests::Priority Queues::Observations</a>).</p>

    <p>As with associative containers (see <a href=
    "#assoc_ds_genericity">Associative Containers::Traits for
    Underlying Data-Structures</a>), the more implementations
    co-exist, the more necessary a traits mechanism is for handling
    generic containers safely and efficiently. This is especially
    important for priority queues, since the invalidation
    guarantees of one of the most useful data structures - binary
    heaps - is markedly different than those of most of the
    others.</p>

    <p><a href="pq_design.html#pq_traits">Design::Priority
    Queues::Traits</a> discusses this further.</p>

    <h3><a name="pq_binary_heap" id="pq_binary_heap">Binary Heap
    Implementation</a></h3>

    <p>Binary heaps are one of the most useful underlying
    data structures for priority queues. They are very efficient in
    terms of memory (since they don't require per-value structure
    metadata), and have the best amortized <tt>push</tt> and
    <tt>pop</tt> performance for primitive types (<i>e.g.</i>,
    <tt><b>int</b></tt>s).</p>

    <p>The STL's <tt>priority_queue</tt> implements this data
    structure as an adapter over a sequence, typically
    <tt>std::vector</tt> or <tt>std::deque</tt>, which correspond
    to Figures <a href="#pq_different_underlying_dss">Underlying
    Priority-Queue Data-Structures</a> A1 and A2, respectively.</p>

    <p>This is indeed an elegant example of the adapter concept and
    the algorithm/container/iterator decomposition (see [<a href=
    "references.html#nelson96stlpq">nelson96stlpql</a>]). There are
    possibly reasons, however, why a binary-heap priority queue
    would be better implemented as a container instead of a
    sequence adapter:</p>

    <ol>
      <li><tt>std::priority_queue</tt> cannot erase values from its
      adapted sequence (irrespective of the sequence type). This
      means that the memory use of an <tt>std::priority_queue</tt>
      object is always proportional to the maximal number of values
      it ever contained, and not to the number of values that it
      currently contains (see <a href=
      "priority_queue_text_pop_mem_usage_test.html">Priority Queue
      Text <tt>pop</tt> Memory Use Test</a>); this implementation
      of binary heaps acts very differently than other underlying
      data structures (<i>e.g.</i>, pairing heaps).</li>

      <li>Some combinations of adapted sequences and value types
      are very inefficient or just don't make sense. If one uses
      <tt>std::priority_queue&lt;std::vector&lt;std::string&gt;
      &gt; &gt;</tt>, for example, then not only will each
      operation perform a logarithmic number of
      <tt>std::string</tt> assignments, but, furthermore, any
      operation (including <tt>pop</tt>) can render the container
      useless due to exceptions. Conversely, if one uses
      <tt>std::priority_queue&lt;std::deque&lt;<b>int</b>&gt; &gt;
      &gt;</tt>, then each operation uses incurs a logarithmic
      number of indirect accesses (through pointers) unnecessarily.
      It might be better to let the container make a conservative
      deduction whether to use the structure in Figures <a href=
      "#pq_different_underlying_dss">Underlying Priority-Queue
      Data-Structures</a> A1 or A2.</li>

      <li>There does not seem to be a systematic way to determine
      what exactly can be done with the priority queue.

        <ol>
          <li>If <tt>p</tt> is a priority queue adapting an
          <tt>std::vector</tt>, then it is possible to iterate over
          all values by using <tt>&amp;p.top()</tt> and
          <tt>&amp;p.top() + p.size()</tt>, but this will not work
          if <tt>p</tt> is adapting an <tt>std::deque</tt>; in any
          case, one cannot use <tt>p.begin()</tt> and
          <tt>p.end()</tt>. If a different sequence is adapted, it
          is even more difficult to determine what can be
          done.</li>

          <li>If <tt>p</tt> is a priority queue adapting an
          <tt>std::deque</tt>, then the reference return by
          <tt>p.top()</tt> will remain valid until it is popped,
          but if <tt>p</tt> adapts an <tt>std::vector</tt>, the
          next <tt>push</tt> will invalidate it. If a different
          sequence is adapted, it is even more difficult to
          determine what can be done.</li>
        </ol>
      </li>

      <li>Sequence-based binary heaps can still implement
      linear-time <tt>erase</tt> and <tt>modify</tt> operations.
      This means that if one needs, <i>e.g.</i>, to erase a small
      (say logarithmic) number of values, then one might still
      choose this underlying data structure. Using
      <tt>std::priority_queue</tt>, however, this will generally
      change the order of growth of the entire sequence of
      operations.</li>
    </ol>
  </div>
</body>
</html>