| #!/bin/bash |
| |
| # Two stages self build |
| |
| set -e # Terminate script at the first line that fails. |
| set -o pipefail # Return the first non-zero pipe command error. |
| set -x # Print commands as they are executed |
| |
| # This script performs an automated build on x86_64-apple-darwin10 of |
| # cross llvm-gcc for i686-pc-mingw32 as |
| # --build=x86_64-apple-darwin10 |
| # --host=x86_64-apple-darwin10 |
| # --target=i686-pc-mingw32 |
| # |
| # Then using this cross llvm-gcc for i686-pc-mingw32 it builds a self-hosted |
| # llvm-gcc for i686-pc-mingw32 as |
| # --build=x86_64-apple-darwin10 |
| # --host=i686-pc-mingw32 |
| # --target=i686-pc-mingw32 |
| # |
| # This script assumes the valid native compiler for x86_64-apple-darwin10 |
| # is in place and available as well as cross tools, libraries and |
| # headers for i686-pc-mingw32. |
| |
| # The usage: |
| # Run this build from the build from the build root directory as |
| # build-self-4-mingw32 [<step>] [<extra args>] |
| |
| # Expected project tree structure: |
| # <build root> |
| # +-- ${LLVM_src} |
| # +-- ${LLVM_GCC_src} |
| # +-- ${LLVM_obj_1} # cross llvm (Stage 1) build directory |
| # +-- ${LLVM_GCC_obj_1} # cross llvm-gcc (Stage 1) build directory |
| # +-- ${LLVM_obj_2} # self llvm (Stage 2) build directory |
| # +-- ${LLVM_GCC_obj_2} # self llvm-gcc (Stage 2) build directory |
| # +-- ${INSTALL} # where the result gets installed |
| |
| LLVM_src=llvm.src # The LLVM source code root directory name. |
| LLVM_GCC_src=llvm-gcc.src # The LLVM-GCC source code root directory name. |
| LLVM_obj_1=llvm-1.obj # The LLVM build root directory name. |
| LLVM_GCC_obj_1=llvm-gcc-1.obj # The LLVM-GCC build root directory name. |
| LLVM_obj_2=llvm-2.obj # The LLVM build directory name for Stage2. |
| LLVM_GCC_obj_2=llvm-gcc-2.obj # The LLVM-GCC build directory name for Stage2. |
| INSTALL=install # Where the result will be installed. |
| |
| # CFLAGS and CXXFLAGS must not be set during the building of cross-tools. |
| unset CFLAGS |
| unset CXXFLAGS |
| |
| BUILD_ROOT=$PWD # Where build happens. |
| PRIVATE_INSTALL=${BUILD_ROOT}/${INSTALL} # Where the result will be installed. |
| |
| export PATH=/opt/local/bin:/opt/local/sbin:/bin:/sbin:/usr/bin:/usr/sbin |
| export PATH=$PATH:/mingw_build_tools/install_with_gcc/bin |
| |
| # Make sure our just built tools will be selected first. |
| export PATH=${PRIVATE_INSTALL}/bin:$PATH |
| |
| #------------------------------------------------------------------------------ |
| # Define build steps, parse and validate input parameters |
| #------------------------------------------------------------------------------ |
| |
| # This script supports the following steps: |
| do_clean=no # Clean up the build directory. |
| do_copy_cross_tools=no # Copy cross-tools. |
| do_configure_llvm_1=no # Configure LLVM. |
| do_make_llvm_1=no # Make LLVM. |
| do_test_llvm_1=no # Test LLVM. |
| do_configure_llvmgcc_1=no # Configure LLVM-GCC. |
| do_make_llvmgcc_1=no # Make LLVM-GCC. |
| do_install_llvmgcc_1=no # Install LLVM-GCC. |
| do_configure_llvm_2=no # Configure LLVM for Stage2. |
| do_make_llvm_2=no # Make LLVM for Stage2. |
| do_configure_llvmgcc_2=no # Configure LLVM-GCC for Stage2. |
| do_make_llvmgcc_2=no # Make LLVM-GCC for Stage2. |
| do_install_llvmgcc_2=no # Install LLVM-GCC for Stage2. |
| |
| do_all=no # Runs all steps at once when requested. |
| |
| # Set step parameter |
| if (( $# == 0 )) ; then |
| do_all=yes |
| fi |
| # else |
| if (( ! $# == 0 )) ; then |
| # First check that the parameter actually defines a step. |
| case $1 in |
| clean | \ |
| copy_cross_tools | \ |
| configure_llvm_1 | \ |
| make_llvm_1 | \ |
| test_llvm_1 | \ |
| configure_llvmgcc_1 | \ |
| make_llvmgcc_1 | \ |
| install_llvmgcc_1 | \ |
| configure_llvm_2 | \ |
| make_llvm_2 | \ |
| configure_llvmgcc_2 | \ |
| make_llvmgcc_2 | \ |
| install_llvmgcc_2 | \ |
| all) |
| eval do_$1=yes # Set the flag for the requested step . |
| shift # Remove it since is is ours and already precessed. |
| ;; |
| |
| *) |
| # Not our parameter. Pass it as is. |
| esac |
| fi |
| |
| # Set all steps if do_all requested |
| if [ "$do_all" == "yes" ] ; then |
| # Set all steps to yes |
| do_clean=yes |
| do_copy_cross_tools=yes |
| do_configure_llvm_1=yes |
| do_make_llvm_1=yes |
| do_test_llvm_1=yes |
| do_configure_llvmgcc_1=yes |
| do_make_llvmgcc_1=yes |
| do_install_llvmgcc_1=yes |
| do_configure_llvm_2=yes |
| do_make_llvm_2=yes |
| do_configure_llvmgcc_2=yes |
| do_make_llvmgcc_2=yes |
| do_install_llvmgcc_2=yes |
| fi |
| |
| #------------------------------------------------------------------------------ |
| # Step: Clean up. |
| #------------------------------------------------------------------------------ |
| if [ "$do_clean" == "yes" ] ; then |
| |
| # Remove everything from where we will be installing the result. |
| rm -rf ${PRIVATE_INSTALL} |
| mkdir -p ${PRIVATE_INSTALL} |
| chmod a+rx ${PRIVATE_INSTALL} |
| |
| fi |
| |
| #------------------------------------------------------------------------------ |
| # Step: Copy cross-tools. |
| #------------------------------------------------------------------------------ |
| if [ "$do_copy_cross_tools" == "yes" ] ; then |
| |
| # We need a local copy of binutils, system libraries and headers, |
| # since we will be installing there. |
| |
| cp -RL /mingw_build_tools/install_with_gcc/ ${PRIVATE_INSTALL} |
| |
| fi |
| |
| #============================================================================== |
| # STAGE 1 builds cross llvm-gcc for i686-pc-mingw32. |
| #============================================================================== |
| |
| #------------------------------------------------------------------------------ |
| # Step: Configure LLVM. |
| #------------------------------------------------------------------------------ |
| if [ "$do_configure_llvm_1" == "yes" ] ; then |
| |
| # Remove previously build files if any. |
| rm -rf ${BUILD_ROOT}/${LLVM_obj_1} |
| mkdir -p ${BUILD_ROOT}/${LLVM_obj_1} |
| chmod a+rx ${BUILD_ROOT}/${LLVM_obj_1} |
| cd ${BUILD_ROOT}/${LLVM_obj_1} |
| |
| ../${LLVM_src}/configure --prefix=${PRIVATE_INSTALL} \ |
| --build=x86_64-apple-darwin10 --host=x86_64-apple-darwin10 \ |
| --target=i686-pc-mingw32 \ |
| --enable-optimize \ |
| --without-llvmgcc --without-llvmgxx \ |
| $@ # Extra args if any |
| |
| fi |
| |
| #------------------------------------------------------------------------------ |
| # Step: Make LLVM. |
| #------------------------------------------------------------------------------ |
| if [ "$do_make_llvm_1" == "yes" ] ; then |
| |
| cd ${BUILD_ROOT}/${LLVM_obj_1} |
| # NOTE: Do not use make ENABLE_OPTIMIZED=1. Some tests fail because of that. |
| nice -n 20 make VERBOSE=1 \ |
| $@ # Extra args if any, like -j16 for example. |
| |
| fi |
| |
| #------------------------------------------------------------------------------ |
| # Step: Test LLVM. |
| #------------------------------------------------------------------------------ |
| if [ "$do_test_llvm_1" == "yes" ] ; then |
| |
| cd ${BUILD_ROOT}/${LLVM_obj_1} |
| make check-lit VERBOSE=1 \ |
| $@ # Extra args if any, like -j16 for example. |
| |
| fi |
| |
| #------------------------------------------------------------------------------ |
| # Step: Configure LLVM-GCC. |
| #------------------------------------------------------------------------------ |
| if [ "$do_configure_llvmgcc_1" == "yes" ] ; then |
| |
| # Remove previous build files if any. |
| rm -rf ${BUILD_ROOT}/${LLVM_GCC_obj_1} |
| mkdir -p ${BUILD_ROOT}/${LLVM_GCC_obj_1} |
| chmod a+rx ${BUILD_ROOT}/${LLVM_GCC_obj_1} |
| cd ${BUILD_ROOT}/${LLVM_GCC_obj_1} |
| |
| ../${LLVM_GCC_src}/configure --prefix=${PRIVATE_INSTALL} \ |
| --build=x86_64-apple-darwin10 --host=x86_64-apple-darwin10 \ |
| --with-local-prefix=/tools \ |
| --target=i686-pc-mingw32 \ |
| --program-prefix=i686-pc-mingw32- \ |
| --enable-llvm=${BUILD_ROOT}/${LLVM_obj_1} \ |
| --enable-languages=c,c++ \ |
| --disable-multilib --disable-nls --disable-shared \ |
| --disable-sjlj-exceptions --disable-__cxa_atexit \ |
| $@ # Extra args if any |
| |
| fi |
| |
| #------------------------------------------------------------------------------ |
| # Step: Make LLVM-GCC. |
| #------------------------------------------------------------------------------ |
| if [ "$do_make_llvmgcc_1" == "yes" ] ; then |
| |
| cd ${BUILD_ROOT}/${LLVM_GCC_obj_1} |
| nice -n 20 make \ |
| $@ # Extra args if any |
| |
| fi |
| |
| #------------------------------------------------------------------------------ |
| # Step: Install LLVM-GCC. |
| #------------------------------------------------------------------------------ |
| if [ "$do_install_llvmgcc_1" == "yes" ] ; then |
| |
| cd ${BUILD_ROOT}/${LLVM_GCC_obj_1} |
| nice -n 20 make install \ |
| $@ # Extra args if any |
| |
| fi |
| |
| #============================================================================== |
| # STAGE 2 builds self-hosted llvm-gcc for i686-pc-mingw32. |
| #============================================================================== |
| |
| #------------------------------------------------------------------------------ |
| # Step: Stage2. Configure LLVM. |
| #------------------------------------------------------------------------------ |
| if [ "$do_configure_llvm_2" == "yes" ] ; then |
| |
| # Remove previous build files if any. |
| rm -rf ${BUILD_ROOT}/${LLVM_obj_2} |
| mkdir -p ${BUILD_ROOT}/${LLVM_obj_2} |
| chmod a+rx ${BUILD_ROOT}/${LLVM_obj_2} |
| cd ${BUILD_ROOT}/${LLVM_obj_2} |
| |
| ../${LLVM_src}/configure --prefix=${PRIVATE_INSTALL} \ |
| --build=x86_64-apple-darwin10 --host=i686-pc-mingw32 \ |
| --target=i686-pc-mingw32 \ |
| --enable-optimize \ |
| --with-llvmgcc=${PRIVATE_INSTALL}/bin/llvm-gcc \ |
| --with-llvmgxx=${PRIVATE_INSTALL}/bin/llvm-g++ |
| |
| fi |
| |
| #------------------------------------------------------------------------------ |
| # Step: Stage2. Make LLVM. |
| #------------------------------------------------------------------------------ |
| if [ "$do_make_llvm_2" == "yes" ] ; then |
| |
| cd ${BUILD_ROOT}/${LLVM_obj_2} |
| # NOTE: Do not use make ENABLE_OPTIMIZED=1. Some tests fail because of that. |
| nice -n 20 make VERBOSE=1 \ |
| $@ # Extra args if any, like -j16 for example. |
| |
| fi |
| |
| #------------------------------------------------------------------------------ |
| # Step: Stage2. Configure LLVM-GCC. |
| #------------------------------------------------------------------------------ |
| if [ "$do_configure_llvmgcc_2" == "yes" ] ; then |
| |
| # Remove previous build files if any. |
| rm -rf ${BUILD_ROOT}/${LLVM_GCC_obj_2} |
| mkdir -p ${BUILD_ROOT}/${LLVM_GCC_obj_2} |
| chmod a+rx ${BUILD_ROOT}/${LLVM_GCC_obj_2} |
| cd ${BUILD_ROOT}/${LLVM_GCC_obj_2} |
| |
| ../${LLVM_GCC_src}/configure --prefix=${PRIVATE_INSTALL} \ |
| --build=x86_64-apple-darwin10 --host=i686-pc-mingw32 \ |
| --with-local-prefix=/tools \ |
| --target=i686-pc-mingw32 \ |
| --program-prefix=llvm- \ |
| --enable-llvm=${BUILD_ROOT}/${LLVM_obj_2} \ |
| --enable-languages=c,c++ \ |
| --disable-multilib --disable-nls --disable-shared \ |
| --disable-sjlj-exceptions --disable-__cxa_atexit \ |
| $@ # Extra args if any |
| |
| fi |
| #------------------------------------------------------------------------------ |
| # Step: Stage2. Make LLVM-GCC. |
| #------------------------------------------------------------------------------ |
| if [ "$do_make_llvmgcc_2" == "yes" ] ; then |
| |
| cd ${BUILD_ROOT}/${LLVM_GCC_obj_2} |
| nice -n 20 make \ |
| $@ # Extra args if any |
| |
| fi |
| |
| #------------------------------------------------------------------------------ |
| # Step: Install LLVM-GCC. |
| #------------------------------------------------------------------------------ |
| if [ "$do_install_llvmgcc_2" == "yes" ] ; then |
| |
| cd ${BUILD_ROOT}/${LLVM_GCC_obj_2} |
| nice -n 20 make install \ |
| $@ # Extra args if any |
| |
| fi |
