This is gdb.info, produced by makeinfo version 4.8 from ./gdb.texinfo.

INFO-DIR-SECTION Software development
START-INFO-DIR-ENTRY
* Gdb: (gdb).                     The GNU debugger.
END-INFO-DIR-ENTRY

   Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009,
2010 2011, 2012 Free Software Foundation, Inc.

   Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3 or
any later version published by the Free Software Foundation; with the
Invariant Sections being "Free Software" and "Free Software Needs Free
Documentation", with the Front-Cover Texts being "A GNU Manual," and
with the Back-Cover Texts as in (a) below.

   (a) The FSF's Back-Cover Text is: "You are free to copy and modify
this GNU Manual.  Buying copies from GNU Press supports the FSF in
developing GNU and promoting software freedom."

   This file documents the GNU debugger GDB.

   This is the Tenth Edition, of `Debugging with GDB: the GNU
Source-Level Debugger' for GDB (GDB) Version 7.5.

   Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009,
2010 2011, 2012 Free Software Foundation, Inc.

   Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3 or
any later version published by the Free Software Foundation; with the
Invariant Sections being "Free Software" and "Free Software Needs Free
Documentation", with the Front-Cover Texts being "A GNU Manual," and
with the Back-Cover Texts as in (a) below.

   (a) The FSF's Back-Cover Text is: "You are free to copy and modify
this GNU Manual.  Buying copies from GNU Press supports the FSF in
developing GNU and promoting software freedom."


File: gdb.info,  Node: Auto Display,  Next: Print Settings,  Prev: Memory,  Up: Data

10.7 Automatic Display
======================

If you find that you want to print the value of an expression frequently
(to see how it changes), you might want to add it to the "automatic
display list" so that GDB prints its value each time your program stops.
Each expression added to the list is given a number to identify it; to
remove an expression from the list, you specify that number.  The
automatic display looks like this:

     2: foo = 38
     3: bar[5] = (struct hack *) 0x3804

This display shows item numbers, expressions and their current values.
As with displays you request manually using `x' or `print', you can
specify the output format you prefer; in fact, `display' decides
whether to use `print' or `x' depending your format specification--it
uses `x' if you specify either the `i' or `s' format, or a unit size;
otherwise it uses `print'.

`display EXPR'
     Add the expression EXPR to the list of expressions to display each
     time your program stops.  *Note Expressions: Expressions.

     `display' does not repeat if you press <RET> again after using it.

`display/FMT EXPR'
     For FMT specifying only a display format and not a size or count,
     add the expression EXPR to the auto-display list but arrange to
     display it each time in the specified format FMT.  *Note Output
     Formats: Output Formats.

`display/FMT ADDR'
     For FMT `i' or `s', or including a unit-size or a number of units,
     add the expression ADDR as a memory address to be examined each
     time your program stops.  Examining means in effect doing `x/FMT
     ADDR'.  *Note Examining Memory: Memory.

   For example, `display/i $pc' can be helpful, to see the machine
instruction about to be executed each time execution stops (`$pc' is a
common name for the program counter; *note Registers: Registers.).

`undisplay DNUMS...'
`delete display DNUMS...'
     Remove items from the list of expressions to display.  Specify the
     numbers of the displays that you want affected with the command
     argument DNUMS.  It can be a single display number, one of the
     numbers shown in the first field of the `info display' display; or
     it could be a range of display numbers, as in `2-4'.

     `undisplay' does not repeat if you press <RET> after using it.
     (Otherwise you would just get the error `No display number ...'.)

`disable display DNUMS...'
     Disable the display of item numbers DNUMS.  A disabled display
     item is not printed automatically, but is not forgotten.  It may be
     enabled again later.  Specify the numbers of the displays that you
     want affected with the command argument DNUMS.  It can be a single
     display number, one of the numbers shown in the first field of the
     `info display' display; or it could be a range of display numbers,
     as in `2-4'.

`enable display DNUMS...'
     Enable display of item numbers DNUMS.  It becomes effective once
     again in auto display of its expression, until you specify
     otherwise.  Specify the numbers of the displays that you want
     affected with the command argument DNUMS.  It can be a single
     display number, one of the numbers shown in the first field of the
     `info display' display; or it could be a range of display numbers,
     as in `2-4'.

`display'
     Display the current values of the expressions on the list, just as
     is done when your program stops.

`info display'
     Print the list of expressions previously set up to display
     automatically, each one with its item number, but without showing
     the values.  This includes disabled expressions, which are marked
     as such.  It also includes expressions which would not be
     displayed right now because they refer to automatic variables not
     currently available.

   If a display expression refers to local variables, then it does not
make sense outside the lexical context for which it was set up.  Such an
expression is disabled when execution enters a context where one of its
variables is not defined.  For example, if you give the command
`display last_char' while inside a function with an argument
`last_char', GDB displays this argument while your program continues to
stop inside that function.  When it stops elsewhere--where there is no
variable `last_char'--the display is disabled automatically.  The next
time your program stops where `last_char' is meaningful, you can enable
the display expression once again.


File: gdb.info,  Node: Print Settings,  Next: Pretty Printing,  Prev: Auto Display,  Up: Data

10.8 Print Settings
===================

GDB provides the following ways to control how arrays, structures, and
symbols are printed.

These settings are useful for debugging programs in any language:

`set print address'
`set print address on'
     GDB prints memory addresses showing the location of stack traces,
     structure values, pointer values, breakpoints, and so forth, even
     when it also displays the contents of those addresses.  The default
     is `on'.  For example, this is what a stack frame display looks
     like with `set print address on':

          (gdb) f
          #0  set_quotes (lq=0x34c78 "<<", rq=0x34c88 ">>")
              at input.c:530
          530         if (lquote != def_lquote)

`set print address off'
     Do not print addresses when displaying their contents.  For
     example, this is the same stack frame displayed with `set print
     address off':

          (gdb) set print addr off
          (gdb) f
          #0  set_quotes (lq="<<", rq=">>") at input.c:530
          530         if (lquote != def_lquote)

     You can use `set print address off' to eliminate all machine
     dependent displays from the GDB interface.  For example, with
     `print address off', you should get the same text for backtraces on
     all machines--whether or not they involve pointer arguments.

`show print address'
     Show whether or not addresses are to be printed.

   When GDB prints a symbolic address, it normally prints the closest
earlier symbol plus an offset.  If that symbol does not uniquely
identify the address (for example, it is a name whose scope is a single
source file), you may need to clarify.  One way to do this is with
`info line', for example `info line *0x4537'.  Alternately, you can set
GDB to print the source file and line number when it prints a symbolic
address:

`set print symbol-filename on'
     Tell GDB to print the source file name and line number of a symbol
     in the symbolic form of an address.

`set print symbol-filename off'
     Do not print source file name and line number of a symbol.  This
     is the default.

`show print symbol-filename'
     Show whether or not GDB will print the source file name and line
     number of a symbol in the symbolic form of an address.

   Another situation where it is helpful to show symbol filenames and
line numbers is when disassembling code; GDB shows you the line number
and source file that corresponds to each instruction.

   Also, you may wish to see the symbolic form only if the address being
printed is reasonably close to the closest earlier symbol:

`set print max-symbolic-offset MAX-OFFSET'
     Tell GDB to only display the symbolic form of an address if the
     offset between the closest earlier symbol and the address is less
     than MAX-OFFSET.  The default is 0, which tells GDB to always
     print the symbolic form of an address if any symbol precedes it.

`show print max-symbolic-offset'
     Ask how large the maximum offset is that GDB prints in a symbolic
     address.

   If you have a pointer and you are not sure where it points, try `set
print symbol-filename on'.  Then you can determine the name and source
file location of the variable where it points, using `p/a POINTER'.
This interprets the address in symbolic form.  For example, here GDB
shows that a variable `ptt' points at another variable `t', defined in
`hi2.c':

     (gdb) set print symbol-filename on
     (gdb) p/a ptt
     $4 = 0xe008 <t in hi2.c>

     _Warning:_ For pointers that point to a local variable, `p/a' does
     not show the symbol name and filename of the referent, even with
     the appropriate `set print' options turned on.

   You can also enable `/a'-like formatting all the time using `set
print symbol on':

`set print symbol on'
     Tell GDB to print the symbol corresponding to an address, if one
     exists.

`set print symbol off'
     Tell GDB not to print the symbol corresponding to an address.  In
     this mode, GDB will still print the symbol corresponding to
     pointers to functions.  This is the default.

`show print symbol'
     Show whether GDB will display the symbol corresponding to an
     address.

   Other settings control how different kinds of objects are printed:

`set print array'
`set print array on'
     Pretty print arrays.  This format is more convenient to read, but
     uses more space.  The default is off.

`set print array off'
     Return to compressed format for arrays.

`show print array'
     Show whether compressed or pretty format is selected for displaying
     arrays.

`set print array-indexes'
`set print array-indexes on'
     Print the index of each element when displaying arrays.  May be
     more convenient to locate a given element in the array or quickly
     find the index of a given element in that printed array.  The
     default is off.

`set print array-indexes off'
     Stop printing element indexes when displaying arrays.

`show print array-indexes'
     Show whether the index of each element is printed when displaying
     arrays.

`set print elements NUMBER-OF-ELEMENTS'
     Set a limit on how many elements of an array GDB will print.  If
     GDB is printing a large array, it stops printing after it has
     printed the number of elements set by the `set print elements'
     command.  This limit also applies to the display of strings.  When
     GDB starts, this limit is set to 200.  Setting  NUMBER-OF-ELEMENTS
     to zero means that the printing is unlimited.

`show print elements'
     Display the number of elements of a large array that GDB will
     print.  If the number is 0, then the printing is unlimited.

`set print frame-arguments VALUE'
     This command allows to control how the values of arguments are
     printed when the debugger prints a frame (*note Frames::).  The
     possible values are:

    `all'
          The values of all arguments are printed.

    `scalars'
          Print the value of an argument only if it is a scalar.  The
          value of more complex arguments such as arrays, structures,
          unions, etc, is replaced by `...'.  This is the default.
          Here is an example where only scalar arguments are shown:

               #1  0x08048361 in call_me (i=3, s=..., ss=0xbf8d508c, u=..., e=green)
                 at frame-args.c:23

    `none'
          None of the argument values are printed.  Instead, the value
          of each argument is replaced by `...'.  In this case, the
          example above now becomes:

               #1  0x08048361 in call_me (i=..., s=..., ss=..., u=..., e=...)
                 at frame-args.c:23

     By default, only scalar arguments are printed.  This command can
     be used to configure the debugger to print the value of all
     arguments, regardless of their type.  However, it is often
     advantageous to not print the value of more complex parameters.
     For instance, it reduces the amount of information printed in each
     frame, making the backtrace more readable.  Also, it improves
     performance when displaying Ada frames, because the computation of
     large arguments can sometimes be CPU-intensive, especially in
     large applications.  Setting `print frame-arguments' to `scalars'
     (the default) or `none' avoids this computation, thus speeding up
     the display of each Ada frame.

`show print frame-arguments'
     Show how the value of arguments should be displayed when printing
     a frame.

`set print entry-values VALUE'
     Set printing of frame argument values at function entry.  In some
     cases GDB can determine the value of function argument which was
     passed by the function caller, even if the value was modified
     inside the called function and therefore is different.  With
     optimized code, the current value could be unavailable, but the
     entry value may still be known.

     The default value is `default' (see below for its description).
     Older GDB behaved as with the setting `no'.  Compilers not
     supporting this feature will behave in the `default' setting the
     same way as with the `no' setting.

     This functionality is currently supported only by DWARF 2
     debugging format and the compiler has to produce
     `DW_TAG_GNU_call_site' tags.  With GCC, you need to specify `-O
     -g' during compilation, to get this information.

     The VALUE parameter can be one of the following:

    `no'
          Print only actual parameter values, never print values from
          function entry point.
               #0  equal (val=5)
               #0  different (val=6)
               #0  lost (val=<optimized out>)
               #0  born (val=10)
               #0  invalid (val=<optimized out>)

    `only'
          Print only parameter values from function entry point.  The
          actual parameter values are never printed.
               #0  equal (val@entry=5)
               #0  different (val@entry=5)
               #0  lost (val@entry=5)
               #0  born (val@entry=<optimized out>)
               #0  invalid (val@entry=<optimized out>)

    `preferred'
          Print only parameter values from function entry point.  If
          value from function entry point is not known while the actual
          value is known, print the actual value for such parameter.
               #0  equal (val@entry=5)
               #0  different (val@entry=5)
               #0  lost (val@entry=5)
               #0  born (val=10)
               #0  invalid (val@entry=<optimized out>)

    `if-needed'
          Print actual parameter values.  If actual parameter value is
          not known while value from function entry point is known,
          print the entry point value for such parameter.
               #0  equal (val=5)
               #0  different (val=6)
               #0  lost (val@entry=5)
               #0  born (val=10)
               #0  invalid (val=<optimized out>)

    `both'
          Always print both the actual parameter value and its value
          from function entry point, even if values of one or both are
          not available due to compiler optimizations.
               #0  equal (val=5, val@entry=5)
               #0  different (val=6, val@entry=5)
               #0  lost (val=<optimized out>, val@entry=5)
               #0  born (val=10, val@entry=<optimized out>)
               #0  invalid (val=<optimized out>, val@entry=<optimized out>)

    `compact'
          Print the actual parameter value if it is known and also its
          value from function entry point if it is known.  If neither
          is known, print for the actual value `<optimized out>'.  If
          not in MI mode (*note GDB/MI::) and if both values are known
          and identical, print the shortened `param=param@entry=VALUE'
          notation.
               #0  equal (val=val@entry=5)
               #0  different (val=6, val@entry=5)
               #0  lost (val@entry=5)
               #0  born (val=10)
               #0  invalid (val=<optimized out>)

    `default'
          Always print the actual parameter value.  Print also its
          value from function entry point, but only if it is known.  If
          not in MI mode (*note GDB/MI::) and if both values are known
          and identical, print the shortened `param=param@entry=VALUE'
          notation.
               #0  equal (val=val@entry=5)
               #0  different (val=6, val@entry=5)
               #0  lost (val=<optimized out>, val@entry=5)
               #0  born (val=10)
               #0  invalid (val=<optimized out>)

     For analysis messages on possible failures of frame argument
     values at function entry resolution see *Note set debug
     entry-values::.

`show print entry-values'
     Show the method being used for printing of frame argument values
     at function entry.

`set print repeats'
     Set the threshold for suppressing display of repeated array
     elements.  When the number of consecutive identical elements of an
     array exceeds the threshold, GDB prints the string `"<repeats N
     times>"', where N is the number of identical repetitions, instead
     of displaying the identical elements themselves.  Setting the
     threshold to zero will cause all elements to be individually
     printed.  The default threshold is 10.

`show print repeats'
     Display the current threshold for printing repeated identical
     elements.

`set print null-stop'
     Cause GDB to stop printing the characters of an array when the
     first NULL is encountered.  This is useful when large arrays
     actually contain only short strings.  The default is off.

`show print null-stop'
     Show whether GDB stops printing an array on the first NULL
     character.

`set print pretty on'
     Cause GDB to print structures in an indented format with one member
     per line, like this:

          $1 = {
            next = 0x0,
            flags = {
              sweet = 1,
              sour = 1
            },
            meat = 0x54 "Pork"
          }

`set print pretty off'
     Cause GDB to print structures in a compact format, like this:

          $1 = {next = 0x0, flags = {sweet = 1, sour = 1}, \
          meat = 0x54 "Pork"}

     This is the default format.

`show print pretty'
     Show which format GDB is using to print structures.

`set print sevenbit-strings on'
     Print using only seven-bit characters; if this option is set, GDB
     displays any eight-bit characters (in strings or character values)
     using the notation `\'NNN.  This setting is best if you are
     working in English (ASCII) and you use the high-order bit of
     characters as a marker or "meta" bit.

`set print sevenbit-strings off'
     Print full eight-bit characters.  This allows the use of more
     international character sets, and is the default.

`show print sevenbit-strings'
     Show whether or not GDB is printing only seven-bit characters.

`set print union on'
     Tell GDB to print unions which are contained in structures and
     other unions.  This is the default setting.

`set print union off'
     Tell GDB not to print unions which are contained in structures and
     other unions.  GDB will print `"{...}"' instead.

`show print union'
     Ask GDB whether or not it will print unions which are contained in
     structures and other unions.

     For example, given the declarations

          typedef enum {Tree, Bug} Species;
          typedef enum {Big_tree, Acorn, Seedling} Tree_forms;
          typedef enum {Caterpillar, Cocoon, Butterfly}
                        Bug_forms;

          struct thing {
            Species it;
            union {
              Tree_forms tree;
              Bug_forms bug;
            } form;
          };

          struct thing foo = {Tree, {Acorn}};

     with `set print union on' in effect `p foo' would print

          $1 = {it = Tree, form = {tree = Acorn, bug = Cocoon}}

     and with `set print union off' in effect it would print

          $1 = {it = Tree, form = {...}}

     `set print union' affects programs written in C-like languages and
     in Pascal.

These settings are of interest when debugging C++ programs:

`set print demangle'
`set print demangle on'
     Print C++ names in their source form rather than in the encoded
     ("mangled") form passed to the assembler and linker for type-safe
     linkage.  The default is on.

`show print demangle'
     Show whether C++ names are printed in mangled or demangled form.

`set print asm-demangle'
`set print asm-demangle on'
     Print C++ names in their source form rather than their mangled
     form, even in assembler code printouts such as instruction
     disassemblies.  The default is off.

`show print asm-demangle'
     Show whether C++ names in assembly listings are printed in mangled
     or demangled form.

`set demangle-style STYLE'
     Choose among several encoding schemes used by different compilers
     to represent C++ names.  The choices for STYLE are currently:

    `auto'
          Allow GDB to choose a decoding style by inspecting your
          program.

    `gnu'
          Decode based on the GNU C++ compiler (`g++') encoding
          algorithm.  This is the default.

    `hp'
          Decode based on the HP ANSI C++ (`aCC') encoding algorithm.

    `lucid'
          Decode based on the Lucid C++ compiler (`lcc') encoding
          algorithm.

    `arm'
          Decode using the algorithm in the `C++ Annotated Reference
          Manual'.  *Warning:* this setting alone is not sufficient to
          allow debugging `cfront'-generated executables.  GDB would
          require further enhancement to permit that.

     If you omit STYLE, you will see a list of possible formats.

`show demangle-style'
     Display the encoding style currently in use for decoding C++
     symbols.

`set print object'
`set print object on'
     When displaying a pointer to an object, identify the _actual_
     (derived) type of the object rather than the _declared_ type, using
     the virtual function table.  Note that the virtual function table
     is required--this feature can only work for objects that have
     run-time type identification; a single virtual method in the
     object's declared type is sufficient.  Note that this setting is
     also taken into account when working with variable objects via MI
     (*note GDB/MI::).

`set print object off'
     Display only the declared type of objects, without reference to the
     virtual function table.  This is the default setting.

`show print object'
     Show whether actual, or declared, object types are displayed.

`set print static-members'
`set print static-members on'
     Print static members when displaying a C++ object.  The default is
     on.

`set print static-members off'
     Do not print static members when displaying a C++ object.

`show print static-members'
     Show whether C++ static members are printed or not.

`set print pascal_static-members'
`set print pascal_static-members on'
     Print static members when displaying a Pascal object.  The default
     is on.

`set print pascal_static-members off'
     Do not print static members when displaying a Pascal object.

`show print pascal_static-members'
     Show whether Pascal static members are printed or not.

`set print vtbl'
`set print vtbl on'
     Pretty print C++ virtual function tables.  The default is off.
     (The `vtbl' commands do not work on programs compiled with the HP
     ANSI C++ compiler (`aCC').)

`set print vtbl off'
     Do not pretty print C++ virtual function tables.

`show print vtbl'
     Show whether C++ virtual function tables are pretty printed, or
     not.


File: gdb.info,  Node: Pretty Printing,  Next: Value History,  Prev: Print Settings,  Up: Data

10.9 Pretty Printing
====================

GDB provides a mechanism to allow pretty-printing of values using
Python code.  It greatly simplifies the display of complex objects.
This mechanism works for both MI and the CLI.

* Menu:

* Pretty-Printer Introduction::  Introduction to pretty-printers
* Pretty-Printer Example::       An example pretty-printer
* Pretty-Printer Commands::      Pretty-printer commands


File: gdb.info,  Node: Pretty-Printer Introduction,  Next: Pretty-Printer Example,  Up: Pretty Printing

10.9.1 Pretty-Printer Introduction
----------------------------------

When GDB prints a value, it first sees if there is a pretty-printer
registered for the value.  If there is then GDB invokes the
pretty-printer to print the value.  Otherwise the value is printed
normally.

   Pretty-printers are normally named.  This makes them easy to manage.
The `info pretty-printer' command will list all the installed
pretty-printers with their names.  If a pretty-printer can handle
multiple data types, then its "subprinters" are the printers for the
individual data types.  Each such subprinter has its own name.  The
format of the name is PRINTER-NAME;SUBPRINTER-NAME.

   Pretty-printers are installed by "registering" them with GDB.
Typically they are automatically loaded and registered when the
corresponding debug information is loaded, thus making them available
without having to do anything special.

   There are three places where a pretty-printer can be registered.

   * Pretty-printers registered globally are available when debugging
     all inferiors.

   * Pretty-printers registered with a program space are available only
     when debugging that program.  *Note Progspaces In Python::, for
     more details on program spaces in Python.

   * Pretty-printers registered with an objfile are loaded and unloaded
     with the corresponding objfile (e.g., shared library).  *Note
     Objfiles In Python::, for more details on objfiles in Python.

   *Note Selecting Pretty-Printers::, for further information on how
pretty-printers are selected,

   *Note Writing a Pretty-Printer::, for implementing pretty printers
for new types.


File: gdb.info,  Node: Pretty-Printer Example,  Next: Pretty-Printer Commands,  Prev: Pretty-Printer Introduction,  Up: Pretty Printing

10.9.2 Pretty-Printer Example
-----------------------------

Here is how a C++ `std::string' looks without a pretty-printer:

     (gdb) print s
     $1 = {
       static npos = 4294967295,
       _M_dataplus = {
         <std::allocator<char>> = {
           <__gnu_cxx::new_allocator<char>> = {
             <No data fields>}, <No data fields>
           },
         members of std::basic_string<char, std::char_traits<char>,
           std::allocator<char> >::_Alloc_hider:
         _M_p = 0x804a014 "abcd"
       }
     }

   With a pretty-printer for `std::string' only the contents are
printed:

     (gdb) print s
     $2 = "abcd"


File: gdb.info,  Node: Pretty-Printer Commands,  Prev: Pretty-Printer Example,  Up: Pretty Printing

10.9.3 Pretty-Printer Commands
------------------------------

`info pretty-printer [OBJECT-REGEXP [NAME-REGEXP]]'
     Print the list of installed pretty-printers.  This includes
     disabled pretty-printers, which are marked as such.

     OBJECT-REGEXP is a regular expression matching the objects whose
     pretty-printers to list.  Objects can be `global', the program
     space's file (*note Progspaces In Python::), and the object files
     within that program space (*note Objfiles In Python::).  *Note
     Selecting Pretty-Printers::, for details on how GDB looks up a
     printer from these three objects.

     NAME-REGEXP is a regular expression matching the name of the
     printers to list.

`disable pretty-printer [OBJECT-REGEXP [NAME-REGEXP]]'
     Disable pretty-printers matching OBJECT-REGEXP and NAME-REGEXP.  A
     disabled pretty-printer is not forgotten, it may be enabled again
     later.

`enable pretty-printer [OBJECT-REGEXP [NAME-REGEXP]]'
     Enable pretty-printers matching OBJECT-REGEXP and NAME-REGEXP.

   Example:

   Suppose we have three pretty-printers installed: one from library1.so
named `foo' that prints objects of type `foo', and another from
library2.so named `bar' that prints two types of objects, `bar1' and
`bar2'.

     (gdb) info pretty-printer
     library1.so:
       foo
     library2.so:
       bar
         bar1
         bar2
     (gdb) info pretty-printer library2
     library2.so:
       bar
         bar1
         bar2
     (gdb) disable pretty-printer library1
     1 printer disabled
     2 of 3 printers enabled
     (gdb) info pretty-printer
     library1.so:
       foo [disabled]
     library2.so:
       bar
         bar1
         bar2
     (gdb) disable pretty-printer library2 bar:bar1
     1 printer disabled
     1 of 3 printers enabled
     (gdb) info pretty-printer library2
     library1.so:
       foo [disabled]
     library2.so:
       bar
         bar1 [disabled]
         bar2
     (gdb) disable pretty-printer library2 bar
     1 printer disabled
     0 of 3 printers enabled
     (gdb) info pretty-printer library2
     library1.so:
       foo [disabled]
     library2.so:
       bar [disabled]
         bar1 [disabled]
         bar2

   Note that for `bar' the entire printer can be disabled, as can each
individual subprinter.


File: gdb.info,  Node: Value History,  Next: Convenience Vars,  Prev: Pretty Printing,  Up: Data

10.10 Value History
===================

Values printed by the `print' command are saved in the GDB "value
history".  This allows you to refer to them in other expressions.
Values are kept until the symbol table is re-read or discarded (for
example with the `file' or `symbol-file' commands).  When the symbol
table changes, the value history is discarded, since the values may
contain pointers back to the types defined in the symbol table.

   The values printed are given "history numbers" by which you can
refer to them.  These are successive integers starting with one.
`print' shows you the history number assigned to a value by printing
`$NUM = ' before the value; here NUM is the history number.

   To refer to any previous value, use `$' followed by the value's
history number.  The way `print' labels its output is designed to
remind you of this.  Just `$' refers to the most recent value in the
history, and `$$' refers to the value before that.  `$$N' refers to the
Nth value from the end; `$$2' is the value just prior to `$$', `$$1' is
equivalent to `$$', and `$$0' is equivalent to `$'.

   For example, suppose you have just printed a pointer to a structure
and want to see the contents of the structure.  It suffices to type

     p *$

   If you have a chain of structures where the component `next' points
to the next one, you can print the contents of the next one with this:

     p *$.next

You can print successive links in the chain by repeating this
command--which you can do by just typing <RET>.

   Note that the history records values, not expressions.  If the value
of `x' is 4 and you type these commands:

     print x
     set x=5

then the value recorded in the value history by the `print' command
remains 4 even though the value of `x' has changed.

`show values'
     Print the last ten values in the value history, with their item
     numbers.  This is like `p $$9' repeated ten times, except that
     `show values' does not change the history.

`show values N'
     Print ten history values centered on history item number N.

`show values +'
     Print ten history values just after the values last printed.  If
     no more values are available, `show values +' produces no display.

   Pressing <RET> to repeat `show values N' has exactly the same effect
as `show values +'.


File: gdb.info,  Node: Convenience Vars,  Next: Registers,  Prev: Value History,  Up: Data

10.11 Convenience Variables
===========================

GDB provides "convenience variables" that you can use within GDB to
hold on to a value and refer to it later.  These variables exist
entirely within GDB; they are not part of your program, and setting a
convenience variable has no direct effect on further execution of your
program.  That is why you can use them freely.

   Convenience variables are prefixed with `$'.  Any name preceded by
`$' can be used for a convenience variable, unless it is one of the
predefined machine-specific register names (*note Registers:
Registers.).  (Value history references, in contrast, are _numbers_
preceded by `$'.  *Note Value History: Value History.)

   You can save a value in a convenience variable with an assignment
expression, just as you would set a variable in your program.  For
example:

     set $foo = *object_ptr

would save in `$foo' the value contained in the object pointed to by
`object_ptr'.

   Using a convenience variable for the first time creates it, but its
value is `void' until you assign a new value.  You can alter the value
with another assignment at any time.

   Convenience variables have no fixed types.  You can assign a
convenience variable any type of value, including structures and
arrays, even if that variable already has a value of a different type.
The convenience variable, when used as an expression, has the type of
its current value.

`show convenience'
     Print a list of convenience variables used so far, and their
     values.  Abbreviated `show conv'.

`init-if-undefined $VARIABLE = EXPRESSION'
     Set a convenience variable if it has not already been set.  This
     is useful for user-defined commands that keep some state.  It is
     similar, in concept, to using local static variables with
     initializers in C (except that convenience variables are global).
     It can also be used to allow users to override default values used
     in a command script.

     If the variable is already defined then the expression is not
     evaluated so any side-effects do not occur.

   One of the ways to use a convenience variable is as a counter to be
incremented or a pointer to be advanced.  For example, to print a field
from successive elements of an array of structures:

     set $i = 0
     print bar[$i++]->contents

Repeat that command by typing <RET>.

   Some convenience variables are created automatically by GDB and given
values likely to be useful.

`$_'
     The variable `$_' is automatically set by the `x' command to the
     last address examined (*note Examining Memory: Memory.).  Other
     commands which provide a default address for `x' to examine also
     set `$_' to that address; these commands include `info line' and
     `info breakpoint'.  The type of `$_' is `void *' except when set
     by the `x' command, in which case it is a pointer to the type of
     `$__'.

`$__'
     The variable `$__' is automatically set by the `x' command to the
     value found in the last address examined.  Its type is chosen to
     match the format in which the data was printed.

`$_exitcode'
     The variable `$_exitcode' is automatically set to the exit code
     when the program being debugged terminates.

`$_probe_argc'
`$_probe_arg0...$_probe_arg11'
     Arguments to a static probe.  *Note Static Probe Points::.

`$_sdata'
     The variable `$_sdata' contains extra collected static tracepoint
     data.  *Note Tracepoint Action Lists: Tracepoint Actions.  Note
     that `$_sdata' could be empty, if not inspecting a trace buffer, or
     if extra static tracepoint data has not been collected.

`$_siginfo'
     The variable `$_siginfo' contains extra signal information (*note
     extra signal information::).  Note that `$_siginfo' could be
     empty, if the application has not yet received any signals.  For
     example, it will be empty before you execute the `run' command.

`$_tlb'
     The variable `$_tlb' is automatically set when debugging
     applications running on MS-Windows in native mode or connected to
     gdbserver that supports the `qGetTIBAddr' request.  *Note General
     Query Packets::.  This variable contains the address of the thread
     information block.


   On HP-UX systems, if you refer to a function or variable name that
begins with a dollar sign, GDB searches for a user or system name
first, before it searches for a convenience variable.

   GDB also supplies some "convenience functions".  These have a syntax
similar to convenience variables.  A convenience function can be used
in an expression just like an ordinary function; however, a convenience
function is implemented internally to GDB.

`help function'
     Print a list of all convenience functions.


File: gdb.info,  Node: Registers,  Next: Floating Point Hardware,  Prev: Convenience Vars,  Up: Data

10.12 Registers
===============

You can refer to machine register contents, in expressions, as variables
with names starting with `$'.  The names of registers are different for
each machine; use `info registers' to see the names used on your
machine.

`info registers'
     Print the names and values of all registers except floating-point
     and vector registers (in the selected stack frame).

`info all-registers'
     Print the names and values of all registers, including
     floating-point and vector registers (in the selected stack frame).

`info registers REGNAME ...'
     Print the "relativized" value of each specified register REGNAME.
     As discussed in detail below, register values are normally
     relative to the selected stack frame.  REGNAME may be any register
     name valid on the machine you are using, with or without the
     initial `$'.

   GDB has four "standard" register names that are available (in
expressions) on most machines--whenever they do not conflict with an
architecture's canonical mnemonics for registers.  The register names
`$pc' and `$sp' are used for the program counter register and the stack
pointer.  `$fp' is used for a register that contains a pointer to the
current stack frame, and `$ps' is used for a register that contains the
processor status.  For example, you could print the program counter in
hex with

     p/x $pc

or print the instruction to be executed next with

     x/i $pc

or add four to the stack pointer(1) with

     set $sp += 4

   Whenever possible, these four standard register names are available
on your machine even though the machine has different canonical
mnemonics, so long as there is no conflict.  The `info registers'
command shows the canonical names.  For example, on the SPARC, `info
registers' displays the processor status register as `$psr' but you can
also refer to it as `$ps'; and on x86-based machines `$ps' is an alias
for the EFLAGS register.

   GDB always considers the contents of an ordinary register as an
integer when the register is examined in this way.  Some machines have
special registers which can hold nothing but floating point; these
registers are considered to have floating point values.  There is no way
to refer to the contents of an ordinary register as floating point value
(although you can _print_ it as a floating point value with `print/f
$REGNAME').

   Some registers have distinct "raw" and "virtual" data formats.  This
means that the data format in which the register contents are saved by
the operating system is not the same one that your program normally
sees.  For example, the registers of the 68881 floating point
coprocessor are always saved in "extended" (raw) format, but all C
programs expect to work with "double" (virtual) format.  In such cases,
GDB normally works with the virtual format only (the format that makes
sense for your program), but the `info registers' command prints the
data in both formats.

   Some machines have special registers whose contents can be
interpreted in several different ways.  For example, modern x86-based
machines have SSE and MMX registers that can hold several values packed
together in several different formats.  GDB refers to such registers in
`struct' notation:

     (gdb) print $xmm1
     $1 = {
       v4_float = {0, 3.43859137e-038, 1.54142831e-044, 1.821688e-044},
       v2_double = {9.92129282474342e-303, 2.7585945287983262e-313},
       v16_int8 = "\000\000\000\000\3706;\001\v\000\000\000\r\000\000",
       v8_int16 = {0, 0, 14072, 315, 11, 0, 13, 0},
       v4_int32 = {0, 20657912, 11, 13},
       v2_int64 = {88725056443645952, 55834574859},
       uint128 = 0x0000000d0000000b013b36f800000000
     }

To set values of such registers, you need to tell GDB which view of the
register you wish to change, as if you were assigning value to a
`struct' member:

      (gdb) set $xmm1.uint128 = 0x000000000000000000000000FFFFFFFF

   Normally, register values are relative to the selected stack frame
(*note Selecting a Frame: Selection.).  This means that you get the
value that the register would contain if all stack frames farther in
were exited and their saved registers restored.  In order to see the
true contents of hardware registers, you must select the innermost
frame (with `frame 0').

   However, GDB must deduce where registers are saved, from the machine
code generated by your compiler.  If some registers are not saved, or if
GDB is unable to locate the saved registers, the selected stack frame
makes no difference.

   ---------- Footnotes ----------

   (1) This is a way of removing one word from the stack, on machines
where stacks grow downward in memory (most machines, nowadays).  This
assumes that the innermost stack frame is selected; setting `$sp' is
not allowed when other stack frames are selected.  To pop entire frames
off the stack, regardless of machine architecture, use `return'; see
*Note Returning from a Function: Returning.


File: gdb.info,  Node: Floating Point Hardware,  Next: Vector Unit,  Prev: Registers,  Up: Data

10.13 Floating Point Hardware
=============================

Depending on the configuration, GDB may be able to give you more
information about the status of the floating point hardware.

`info float'
     Display hardware-dependent information about the floating point
     unit.  The exact contents and layout vary depending on the
     floating point chip.  Currently, `info float' is supported on the
     ARM and x86 machines.


File: gdb.info,  Node: Vector Unit,  Next: OS Information,  Prev: Floating Point Hardware,  Up: Data

10.14 Vector Unit
=================

Depending on the configuration, GDB may be able to give you more
information about the status of the vector unit.

`info vector'
     Display information about the vector unit.  The exact contents and
     layout vary depending on the hardware.


File: gdb.info,  Node: OS Information,  Next: Memory Region Attributes,  Prev: Vector Unit,  Up: Data

10.15 Operating System Auxiliary Information
============================================

GDB provides interfaces to useful OS facilities that can help you debug
your program.

   When GDB runs on a "Posix system" (such as GNU or Unix machines), it
interfaces with the inferior via the `ptrace' system call.  The
operating system creates a special sata structure, called `struct
user', for this interface.  You can use the command `info udot' to
display the contents of this data structure.

`info udot'
     Display the contents of the `struct user' maintained by the OS
     kernel for the program being debugged.  GDB displays the contents
     of `struct user' as a list of hex numbers, similar to the
     `examine' command.

   Some operating systems supply an "auxiliary vector" to programs at
startup.  This is akin to the arguments and environment that you
specify for a program, but contains a system-dependent variety of
binary values that tell system libraries important details about the
hardware, operating system, and process.  Each value's purpose is
identified by an integer tag; the meanings are well-known but
system-specific.  Depending on the configuration and operating system
facilities, GDB may be able to show you this information.  For remote
targets, this functionality may further depend on the remote stub's
support of the `qXfer:auxv:read' packet, see *Note qXfer auxiliary
vector read::.

`info auxv'
     Display the auxiliary vector of the inferior, which can be either a
     live process or a core dump file.  GDB prints each tag value
     numerically, and also shows names and text descriptions for
     recognized tags.  Some values in the vector are numbers, some bit
     masks, and some pointers to strings or other data.  GDB displays
     each value in the most appropriate form for a recognized tag, and
     in hexadecimal for an unrecognized tag.

   On some targets, GDB can access operating system-specific
information and show it to you.  The types of information available
will differ depending on the type of operating system running on the
target.  The mechanism used to fetch the data is described in *Note
Operating System Information::.  For remote targets, this functionality
depends on the remote stub's support of the `qXfer:osdata:read' packet,
see *Note qXfer osdata read::.

`info os INFOTYPE'
     Display OS information of the requested type.

     On GNU/Linux, the following values of INFOTYPE are valid:

    `processes'
          Display the list of processes on the target.  For each
          process, GDB prints the process identifier, the name of the
          user, the command corresponding to the process, and the list
          of processor cores that the process is currently running on.
          (To understand what these properties mean, for this and the
          following info types, please consult the general GNU/Linux
          documentation.)

    `procgroups'
          Display the list of process groups on the target.  For each
          process, GDB prints the identifier of the process group that
          it belongs to, the command corresponding to the process group
          leader, the process identifier, and the command line of the
          process.  The list is sorted first by the process group
          identifier, then by the process identifier, so that processes
          belonging to the same process group are grouped together and
          the process group leader is listed first.

    `threads'
          Display the list of threads running on the target.  For each
          thread, GDB prints the identifier of the process that the
          thread belongs to, the command of the process, the thread
          identifier, and the processor core that it is currently
          running on.  The main thread of a process is not listed.

    `files'
          Display the list of open file descriptors on the target.  For
          each file descriptor, GDB prints the identifier of the process
          owning the descriptor, the command of the owning process, the
          value of the descriptor, and the target of the descriptor.

    `sockets'
          Display the list of Internet-domain sockets on the target.
          For each socket, GDB prints the address and port of the local
          and remote endpoints, the current state of the connection,
          the creator of the socket, the IP address family of the
          socket, and the type of the connection.

    `shm'
          Display the list of all System V shared-memory regions on the
          target.  For each shared-memory region, GDB prints the region
          key, the shared-memory identifier, the access permissions,
          the size of the region, the process that created the region,
          the process that last attached to or detached from the
          region, the current number of live attaches to the region,
          and the times at which the region was last attached to,
          detach from, and changed.

    `semaphores'
          Display the list of all System V semaphore sets on the
          target.  For each semaphore set, GDB prints the semaphore set
          key, the semaphore set identifier, the access permissions,
          the number of semaphores in the set, the user and group of
          the owner and creator of the semaphore set, and the times at
          which the semaphore set was operated upon and changed.

    `msg'
          Display the list of all System V message queues on the
          target.  For each message queue, GDB prints the message queue
          key, the message queue identifier, the access permissions,
          the current number of bytes on the queue, the current number
          of messages on the queue, the processes that last sent and
          received a message on the queue, the user and group of the
          owner and creator of the message queue, the times at which a
          message was last sent and received on the queue, and the time
          at which the message queue was last changed.

    `modules'
          Display the list of all loaded kernel modules on the target.
          For each module, GDB prints the module name, the size of the
          module in bytes, the number of times the module is used, the
          dependencies of the module, the status of the module, and the
          address of the loaded module in memory.

`info os'
     If INFOTYPE is omitted, then list the possible values for INFOTYPE
     and the kind of OS information available for each INFOTYPE.  If
     the target does not return a list of possible types, this command
     will report an error.


File: gdb.info,  Node: Memory Region Attributes,  Next: Dump/Restore Files,  Prev: OS Information,  Up: Data

10.16 Memory Region Attributes
==============================

"Memory region attributes" allow you to describe special handling
required by regions of your target's memory.  GDB uses attributes to
determine whether to allow certain types of memory accesses; whether to
use specific width accesses; and whether to cache target memory.  By
default the description of memory regions is fetched from the target
(if the current target supports this), but the user can override the
fetched regions.

   Defined memory regions can be individually enabled and disabled.
When a memory region is disabled, GDB uses the default attributes when
accessing memory in that region.  Similarly, if no memory regions have
been defined, GDB uses the default attributes when accessing all memory.

   When a memory region is defined, it is given a number to identify it;
to enable, disable, or remove a memory region, you specify that number.

`mem LOWER UPPER ATTRIBUTES...'
     Define a memory region bounded by LOWER and UPPER with attributes
     ATTRIBUTES..., and add it to the list of regions monitored by GDB.
     Note that UPPER == 0 is a special case: it is treated as the
     target's maximum memory address.  (0xffff on 16 bit targets,
     0xffffffff on 32 bit targets, etc.)

`mem auto'
     Discard any user changes to the memory regions and use
     target-supplied regions, if available, or no regions if the target
     does not support.

`delete mem NUMS...'
     Remove memory regions NUMS... from the list of regions monitored
     by GDB.

`disable mem NUMS...'
     Disable monitoring of memory regions NUMS....  A disabled memory
     region is not forgotten.  It may be enabled again later.

`enable mem NUMS...'
     Enable monitoring of memory regions NUMS....

`info mem'
     Print a table of all defined memory regions, with the following
     columns for each region:

    _Memory Region Number_

    _Enabled or Disabled._
          Enabled memory regions are marked with `y'.  Disabled memory
          regions are marked with `n'.

    _Lo Address_
          The address defining the inclusive lower bound of the memory
          region.

    _Hi Address_
          The address defining the exclusive upper bound of the memory
          region.

    _Attributes_
          The list of attributes set for this memory region.

10.16.1 Attributes
------------------

10.16.1.1 Memory Access Mode
............................

The access mode attributes set whether GDB may make read or write
accesses to a memory region.

   While these attributes prevent GDB from performing invalid memory
accesses, they do nothing to prevent the target system, I/O DMA, etc.
from accessing memory.

`ro'
     Memory is read only.

`wo'
     Memory is write only.

`rw'
     Memory is read/write.  This is the default.

10.16.1.2 Memory Access Size
............................

The access size attribute tells GDB to use specific sized accesses in
the memory region.  Often memory mapped device registers require
specific sized accesses.  If no access size attribute is specified, GDB
may use accesses of any size.

`8'
     Use 8 bit memory accesses.

`16'
     Use 16 bit memory accesses.

`32'
     Use 32 bit memory accesses.

`64'
     Use 64 bit memory accesses.

10.16.1.3 Data Cache
....................

The data cache attributes set whether GDB will cache target memory.
While this generally improves performance by reducing debug protocol
overhead, it can lead to incorrect results because GDB does not know
about volatile variables or memory mapped device registers.

`cache'
     Enable GDB to cache target memory.

`nocache'
     Disable GDB from caching target memory.  This is the default.

10.16.2 Memory Access Checking
------------------------------

GDB can be instructed to refuse accesses to memory that is not
explicitly described.  This can be useful if accessing such regions has
undesired effects for a specific target, or to provide better error
checking.  The following commands control this behaviour.

`set mem inaccessible-by-default [on|off]'
     If `on' is specified, make  GDB treat memory not explicitly
     described by the memory ranges as non-existent and refuse accesses
     to such memory.  The checks are only performed if there's at least
     one memory range defined.  If `off' is specified, make GDB treat
     the memory not explicitly described by the memory ranges as RAM.
     The default value is `on'.  

`show mem inaccessible-by-default'
     Show the current handling of accesses to unknown memory.


File: gdb.info,  Node: Dump/Restore Files,  Next: Core File Generation,  Prev: Memory Region Attributes,  Up: Data

10.17 Copy Between Memory and a File
====================================

You can use the commands `dump', `append', and `restore' to copy data
between target memory and a file.  The `dump' and `append' commands
write data to a file, and the `restore' command reads data from a file
back into the inferior's memory.  Files may be in binary, Motorola
S-record, Intel hex, or Tektronix Hex format; however, GDB can only
append to binary files.

`dump [FORMAT] memory FILENAME START_ADDR END_ADDR'
`dump [FORMAT] value FILENAME EXPR'
     Dump the contents of memory from START_ADDR to END_ADDR, or the
     value of EXPR, to FILENAME in the given format.

     The FORMAT parameter may be any one of:
    `binary'
          Raw binary form.

    `ihex'
          Intel hex format.

    `srec'
          Motorola S-record format.

    `tekhex'
          Tektronix Hex format.

     GDB uses the same definitions of these formats as the GNU binary
     utilities, like `objdump' and `objcopy'.  If FORMAT is omitted,
     GDB dumps the data in raw binary form.

`append [binary] memory FILENAME START_ADDR END_ADDR'
`append [binary] value FILENAME EXPR'
     Append the contents of memory from START_ADDR to END_ADDR, or the
     value of EXPR, to the file FILENAME, in raw binary form.  (GDB can
     only append data to files in raw binary form.)

`restore FILENAME [binary] BIAS START END'
     Restore the contents of file FILENAME into memory.  The `restore'
     command can automatically recognize any known BFD file format,
     except for raw binary.  To restore a raw binary file you must
     specify the optional keyword `binary' after the filename.

     If BIAS is non-zero, its value will be added to the addresses
     contained in the file.  Binary files always start at address zero,
     so they will be restored at address BIAS.  Other bfd files have a
     built-in location; they will be restored at offset BIAS from that
     location.

     If START and/or END are non-zero, then only data between file
     offset START and file offset END will be restored.  These offsets
     are relative to the addresses in the file, before the BIAS
     argument is applied.



File: gdb.info,  Node: Core File Generation,  Next: Character Sets,  Prev: Dump/Restore Files,  Up: Data

10.18 How to Produce a Core File from Your Program
==================================================

A "core file" or "core dump" is a file that records the memory image of
a running process and its process status (register values etc.).  Its
primary use is post-mortem debugging of a program that crashed while it
ran outside a debugger.  A program that crashes automatically produces
a core file, unless this feature is disabled by the user.  *Note
Files::, for information on invoking GDB in the post-mortem debugging
mode.

   Occasionally, you may wish to produce a core file of the program you
are debugging in order to preserve a snapshot of its state.  GDB has a
special command for that.

`generate-core-file [FILE]'
`gcore [FILE]'
     Produce a core dump of the inferior process.  The optional argument
     FILE specifies the file name where to put the core dump.  If not
     specified, the file name defaults to `core.PID', where PID is the
     inferior process ID.

     Note that this command is implemented only for some systems (as of
     this writing, GNU/Linux, FreeBSD, Solaris, Unixware, and S390).


File: gdb.info,  Node: Character Sets,  Next: Caching Remote Data,  Prev: Core File Generation,  Up: Data

10.19 Character Sets
====================

If the program you are debugging uses a different character set to
represent characters and strings than the one GDB uses itself, GDB can
automatically translate between the character sets for you.  The
character set GDB uses we call the "host character set"; the one the
inferior program uses we call the "target character set".

   For example, if you are running GDB on a GNU/Linux system, which
uses the ISO Latin 1 character set, but you are using GDB's remote
protocol (*note Remote Debugging::) to debug a program running on an
IBM mainframe, which uses the EBCDIC character set, then the host
character set is Latin-1, and the target character set is EBCDIC.  If
you give GDB the command `set target-charset EBCDIC-US', then GDB
translates between EBCDIC and Latin 1 as you print character or string
values, or use character and string literals in expressions.

   GDB has no way to automatically recognize which character set the
inferior program uses; you must tell it, using the `set target-charset'
command, described below.

   Here are the commands for controlling GDB's character set support:

`set target-charset CHARSET'
     Set the current target character set to CHARSET.  To display the
     list of supported target character sets, type
     `set target-charset <TAB><TAB>'.

`set host-charset CHARSET'
     Set the current host character set to CHARSET.

     By default, GDB uses a host character set appropriate to the
     system it is running on; you can override that default using the
     `set host-charset' command.  On some systems, GDB cannot
     automatically determine the appropriate host character set.  In
     this case, GDB uses `UTF-8'.

     GDB can only use certain character sets as its host character set.
     If you type `set host-charset <TAB><TAB>', GDB will list the host
     character sets it supports.

`set charset CHARSET'
     Set the current host and target character sets to CHARSET.  As
     above, if you type `set charset <TAB><TAB>', GDB will list the
     names of the character sets that can be used for both host and
     target.

`show charset'
     Show the names of the current host and target character sets.

`show host-charset'
     Show the name of the current host character set.

`show target-charset'
     Show the name of the current target character set.

`set target-wide-charset CHARSET'
     Set the current target's wide character set to CHARSET.  This is
     the character set used by the target's `wchar_t' type.  To display
     the list of supported wide character sets, type
     `set target-wide-charset <TAB><TAB>'.

`show target-wide-charset'
     Show the name of the current target's wide character set.

   Here is an example of GDB's character set support in action.  Assume
that the following source code has been placed in the file
`charset-test.c':

     #include <stdio.h>

     char ascii_hello[]
       = {72, 101, 108, 108, 111, 44, 32, 119,
          111, 114, 108, 100, 33, 10, 0};
     char ibm1047_hello[]
       = {200, 133, 147, 147, 150, 107, 64, 166,
          150, 153, 147, 132, 90, 37, 0};

     main ()
     {
       printf ("Hello, world!\n");
     }

   In this program, `ascii_hello' and `ibm1047_hello' are arrays
containing the string `Hello, world!' followed by a newline, encoded in
the ASCII and IBM1047 character sets.

   We compile the program, and invoke the debugger on it:

     $ gcc -g charset-test.c -o charset-test
     $ gdb -nw charset-test
     GNU gdb 2001-12-19-cvs
     Copyright 2001 Free Software Foundation, Inc.
     ...
     (gdb)

   We can use the `show charset' command to see what character sets GDB
is currently using to interpret and display characters and strings:

     (gdb) show charset
     The current host and target character set is `ISO-8859-1'.
     (gdb)

   For the sake of printing this manual, let's use ASCII as our initial
character set:
     (gdb) set charset ASCII
     (gdb) show charset
     The current host and target character set is `ASCII'.
     (gdb)

   Let's assume that ASCII is indeed the correct character set for our
host system -- in other words, let's assume that if GDB prints
characters using the ASCII character set, our terminal will display
them properly.  Since our current target character set is also ASCII,
the contents of `ascii_hello' print legibly:

     (gdb) print ascii_hello
     $1 = 0x401698 "Hello, world!\n"
     (gdb) print ascii_hello[0]
     $2 = 72 'H'
     (gdb)

   GDB uses the target character set for character and string literals
you use in expressions:

     (gdb) print '+'
     $3 = 43 '+'
     (gdb)

   The ASCII character set uses the number 43 to encode the `+'
character.

   GDB relies on the user to tell it which character set the target
program uses.  If we print `ibm1047_hello' while our target character
set is still ASCII, we get jibberish:

     (gdb) print ibm1047_hello
     $4 = 0x4016a8 "\310\205\223\223\226k@\246\226\231\223\204Z%"
     (gdb) print ibm1047_hello[0]
     $5 = 200 '\310'
     (gdb)

   If we invoke the `set target-charset' followed by <TAB><TAB>, GDB
tells us the character sets it supports:

     (gdb) set target-charset
     ASCII       EBCDIC-US   IBM1047     ISO-8859-1
     (gdb) set target-charset

   We can select IBM1047 as our target character set, and examine the
program's strings again.  Now the ASCII string is wrong, but GDB
translates the contents of `ibm1047_hello' from the target character
set, IBM1047, to the host character set, ASCII, and they display
correctly:

     (gdb) set target-charset IBM1047
     (gdb) show charset
     The current host character set is `ASCII'.
     The current target character set is `IBM1047'.
     (gdb) print ascii_hello
     $6 = 0x401698 "\110\145%%?\054\040\167?\162%\144\041\012"
     (gdb) print ascii_hello[0]
     $7 = 72 '\110'
     (gdb) print ibm1047_hello
     $8 = 0x4016a8 "Hello, world!\n"
     (gdb) print ibm1047_hello[0]
     $9 = 200 'H'
     (gdb)

   As above, GDB uses the target character set for character and string
literals you use in expressions:

     (gdb) print '+'
     $10 = 78 '+'
     (gdb)

   The IBM1047 character set uses the number 78 to encode the `+'
character.


File: gdb.info,  Node: Caching Remote Data,  Next: Searching Memory,  Prev: Character Sets,  Up: Data

10.20 Caching Data of Remote Targets
====================================

GDB caches data exchanged between the debugger and a remote target
(*note Remote Debugging::).  Such caching generally improves
performance, because it reduces the overhead of the remote protocol by
bundling memory reads and writes into large chunks.  Unfortunately,
simply caching everything would lead to incorrect results, since GDB
does not necessarily know anything about volatile values, memory-mapped
I/O addresses, etc.  Furthermore, in non-stop mode (*note Non-Stop
Mode::) memory can be changed _while_ a gdb command is executing.
Therefore, by default, GDB only caches data known to be on the stack(1).
Other regions of memory can be explicitly marked as cacheable; see
*note Memory Region Attributes::.

`set remotecache on'
`set remotecache off'
     This option no longer does anything; it exists for compatibility
     with old scripts.

`show remotecache'
     Show the current state of the obsolete remotecache flag.

`set stack-cache on'
`set stack-cache off'
     Enable or disable caching of stack accesses.  When `ON', use
     caching.  By default, this option is `ON'.

`show stack-cache'
     Show the current state of data caching for memory accesses.

`info dcache [line]'
     Print the information about the data cache performance.  The
     information displayed includes the dcache width and depth, and for
     each cache line, its number, address, and how many times it was
     referenced.  This command is useful for debugging the data cache
     operation.

     If a line number is specified, the contents of that line will be
     printed in hex.

`set dcache size SIZE'
     Set maximum number of entries in dcache (dcache depth above).

`set dcache line-size LINE-SIZE'
     Set number of bytes each dcache entry caches (dcache width above).
     Must be a power of 2.

`show dcache size'
     Show maximum number of dcache entries.  See also *Note info
     dcache: Caching Remote Data.

`show dcache line-size'
     Show default size of dcache lines.  See also *Note info dcache:
     Caching Remote Data.


   ---------- Footnotes ----------

   (1) In non-stop mode, it is moderately rare for a running thread to
modify the stack of a stopped thread in a way that would interfere with
a backtrace, and caching of stack reads provides a significant speed up
of remote backtraces.


File: gdb.info,  Node: Searching Memory,  Prev: Caching Remote Data,  Up: Data

10.21 Search Memory
===================

Memory can be searched for a particular sequence of bytes with the
`find' command.

`find [/SN] START_ADDR, +LEN, VAL1 [, VAL2, ...]'
`find [/SN] START_ADDR, END_ADDR, VAL1 [, VAL2, ...]'
     Search memory for the sequence of bytes specified by VAL1, VAL2,
     etc.  The search begins at address START_ADDR and continues for
     either LEN bytes or through to END_ADDR inclusive.

   S and N are optional parameters.  They may be specified in either
order, apart or together.

S, search query size
     The size of each search query value.

    `b'
          bytes

    `h'
          halfwords (two bytes)

    `w'
          words (four bytes)

    `g'
          giant words (eight bytes)

     All values are interpreted in the current language.  This means,
     for example, that if the current source language is C/C++ then
     searching for the string "hello" includes the trailing '\0'.

     If the value size is not specified, it is taken from the value's
     type in the current language.  This is useful when one wants to
     specify the search pattern as a mixture of types.  Note that this
     means, for example, that in the case of C-like languages a search
     for an untyped 0x42 will search for `(int) 0x42' which is
     typically four bytes.

N, maximum number of finds
     The maximum number of matches to print.  The default is to print
     all finds.

   You can use strings as search values.  Quote them with double-quotes
(`"').  The string value is copied into the search pattern byte by
byte, regardless of the endianness of the target and the size
specification.

   The address of each match found is printed as well as a count of the
number of matches found.

   The address of the last value found is stored in convenience variable
`$_'.  A count of the number of matches is stored in `$numfound'.

   For example, if stopped at the `printf' in this function:

     void
     hello ()
     {
       static char hello[] = "hello-hello";
       static struct { char c; short s; int i; }
         __attribute__ ((packed)) mixed
         = { 'c', 0x1234, 0x87654321 };
       printf ("%s\n", hello);
     }

you get during debugging:

     (gdb) find &hello[0], +sizeof(hello), "hello"
     0x804956d <hello.1620+6>
     1 pattern found
     (gdb) find &hello[0], +sizeof(hello), 'h', 'e', 'l', 'l', 'o'
     0x8049567 <hello.1620>
     0x804956d <hello.1620+6>
     2 patterns found
     (gdb) find /b1 &hello[0], +sizeof(hello), 'h', 0x65, 'l'
     0x8049567 <hello.1620>
     1 pattern found
     (gdb) find &mixed, +sizeof(mixed), (char) 'c', (short) 0x1234, (int) 0x87654321
     0x8049560 <mixed.1625>
     1 pattern found
     (gdb) print $numfound
     $1 = 1
     (gdb) print $_
     $2 = (void *) 0x8049560


File: gdb.info,  Node: Optimized Code,  Next: Macros,  Prev: Data,  Up: Top

11 Debugging Optimized Code
***************************

Almost all compilers support optimization.  With optimization disabled,
the compiler generates assembly code that corresponds directly to your
source code, in a simplistic way.  As the compiler applies more
powerful optimizations, the generated assembly code diverges from your
original source code.  With help from debugging information generated
by the compiler, GDB can map from the running program back to
constructs from your original source.

   GDB is more accurate with optimization disabled.  If you can
recompile without optimization, it is easier to follow the progress of
your program during debugging.  But, there are many cases where you may
need to debug an optimized version.

   When you debug a program compiled with `-g -O', remember that the
optimizer has rearranged your code; the debugger shows you what is
really there.  Do not be too surprised when the execution path does not
exactly match your source file!  An extreme example: if you define a
variable, but never use it, GDB never sees that variable--because the
compiler optimizes it out of existence.

   Some things do not work as well with `-g -O' as with just `-g',
particularly on machines with instruction scheduling.  If in doubt,
recompile with `-g' alone, and if this fixes the problem, please report
it to us as a bug (including a test case!).  *Note Variables::, for
more information about debugging optimized code.

* Menu:

* Inline Functions::            How GDB presents inlining
* Tail Call Frames::            GDB analysis of jumps to functions


File: gdb.info,  Node: Inline Functions,  Next: Tail Call Frames,  Up: Optimized Code

11.1 Inline Functions
=====================

"Inlining" is an optimization that inserts a copy of the function body
directly at each call site, instead of jumping to a shared routine.
GDB displays inlined functions just like non-inlined functions.  They
appear in backtraces.  You can view their arguments and local
variables, step into them with `step', skip them with `next', and
escape from them with `finish'.  You can check whether a function was
inlined by using the `info frame' command.

   For GDB to support inlined functions, the compiler must record
information about inlining in the debug information -- GCC using the
DWARF 2 format does this, and several other compilers do also.  GDB
only supports inlined functions when using DWARF 2.  Versions of GCC
before 4.1 do not emit two required attributes (`DW_AT_call_file' and
`DW_AT_call_line'); GDB does not display inlined function calls with
earlier versions of GCC.  It instead displays the arguments and local
variables of inlined functions as local variables in the caller.

   The body of an inlined function is directly included at its call
site; unlike a non-inlined function, there are no instructions devoted
to the call.  GDB still pretends that the call site and the start of
the inlined function are different instructions.  Stepping to the call
site shows the call site, and then stepping again shows the first line
of the inlined function, even though no additional instructions are
executed.

   This makes source-level debugging much clearer; you can see both the
context of the call and then the effect of the call.  Only stepping by
a single instruction using `stepi' or `nexti' does not do this; single
instruction steps always show the inlined body.

   There are some ways that GDB does not pretend that inlined function
calls are the same as normal calls:

   * Setting breakpoints at the call site of an inlined function may not
     work, because the call site does not contain any code.  GDB may
     incorrectly move the breakpoint to the next line of the enclosing
     function, after the call.  This limitation will be removed in a
     future version of GDB; until then, set a breakpoint on an earlier
     line or inside the inlined function instead.

   * GDB cannot locate the return value of inlined calls after using
     the `finish' command.  This is a limitation of compiler-generated
     debugging information; after `finish', you can step to the next
     line and print a variable where your program stored the return
     value.



File: gdb.info,  Node: Tail Call Frames,  Prev: Inline Functions,  Up: Optimized Code

11.2 Tail Call Frames
=====================

Function `B' can call function `C' in its very last statement.  In
unoptimized compilation the call of `C' is immediately followed by
return instruction at the end of `B' code.  Optimizing compiler may
replace the call and return in function `B' into one jump to function
`C' instead.  Such use of a jump instruction is called "tail call".

   During execution of function `C', there will be no indication in the
function call stack frames that it was tail-called from `B'.  If
function `A' regularly calls function `B' which tail-calls function `C',
then GDB will see `A' as the caller of `C'.  However, in some cases GDB
can determine that `C' was tail-called from `B', and it will then
create fictitious call frame for that, with the return address set up
as if `B' called `C' normally.

   This functionality is currently supported only by DWARF 2 debugging
format and the compiler has to produce `DW_TAG_GNU_call_site' tags.
With GCC, you need to specify `-O -g' during compilation, to get this
information.

   `info frame' command (*note Frame Info::) will indicate the tail
call frame kind by text `tail call frame' such as in this sample GDB
output:

     (gdb) x/i $pc - 2
        0x40066b <b(int, double)+11>: jmp 0x400640 <c(int, double)>
     (gdb) info frame
     Stack level 1, frame at 0x7fffffffda30:
      rip = 0x40066d in b (amd64-entry-value.cc:59); saved rip 0x4004c5
      tail call frame, caller of frame at 0x7fffffffda30
      source language c++.
      Arglist at unknown address.
      Locals at unknown address, Previous frame's sp is 0x7fffffffda30

   The detection of all the possible code path executions can find them
ambiguous.  There is no execution history stored (possible *Note
Reverse Execution:: is never used for this purpose) and the last known
caller could have reached the known callee by multiple different jump
sequences.  In such case GDB still tries to show at least all the
unambiguous top tail callers and all the unambiguous bottom tail
calees, if any.

`set debug entry-values'
     When set to on, enables printing of analysis messages for both
     frame argument values at function entry and tail calls.  It will
     show all the possible valid tail calls code paths it has
     considered.  It will also print the intersection of them with the
     final unambiguous (possibly partial or even empty) code path
     result.

`show debug entry-values'
     Show the current state of analysis messages printing for both
     frame argument values at function entry and tail calls.

   The analysis messages for tail calls can for example show why the
virtual tail call frame for function `c' has not been recognized (due
to the indirect reference by variable `x'):

     static void __attribute__((noinline, noclone)) c (void);
     void (*x) (void) = c;
     static void __attribute__((noinline, noclone)) a (void) { x++; }
     static void __attribute__((noinline, noclone)) c (void) { a (); }
     int main (void) { x (); return 0; }

     Breakpoint 1, DW_OP_GNU_entry_value resolving cannot find
     DW_TAG_GNU_call_site 0x40039a in main
     a () at t.c:3
     3	static void __attribute__((noinline, noclone)) a (void) { x++; }
     (gdb) bt
     #0  a () at t.c:3
     #1  0x000000000040039a in main () at t.c:5

   Another possibility is an ambiguous virtual tail call frames
resolution:

     int i;
     static void __attribute__((noinline, noclone)) f (void) { i++; }
     static void __attribute__((noinline, noclone)) e (void) { f (); }
     static void __attribute__((noinline, noclone)) d (void) { f (); }
     static void __attribute__((noinline, noclone)) c (void) { d (); }
     static void __attribute__((noinline, noclone)) b (void)
     { if (i) c (); else e (); }
     static void __attribute__((noinline, noclone)) a (void) { b (); }
     int main (void) { a (); return 0; }

     tailcall: initial: 0x4004d2(a) 0x4004ce(b) 0x4004b2(c) 0x4004a2(d)
     tailcall: compare: 0x4004d2(a) 0x4004cc(b) 0x400492(e)
     tailcall: reduced: 0x4004d2(a) |
     (gdb) bt
     #0  f () at t.c:2
     #1  0x00000000004004d2 in a () at t.c:8
     #2  0x0000000000400395 in main () at t.c:9

   Frames #0 and #2 are real, #1 is a virtual tail call frame.  The
code can have possible execution paths `main->a->b->c->d->f' or
`main->a->b->e->f', GDB cannot find which one from the inferior state.

   `initial:' state shows some random possible calling sequence GDB has
found.  It then finds another possible calling sequcen - that one is
prefixed by `compare:'.  The non-ambiguous intersection of these two is
printed as the `reduced:' calling sequence.  That one could have many
futher `compare:' and `reduced:' statements as long as there remain any
non-ambiguous sequence entries.

   For the frame of function `b' in both cases there are different
possible `$pc' values (`0x4004cc' or `0x4004ce'), therefore this frame
is also ambigous.  The only non-ambiguous frame is the one for function
`a', therefore this one is displayed to the user while the ambiguous
frames are omitted.

   There can be also reasons why printing of frame argument values at
function entry may fail:

     int v;
     static void __attribute__((noinline, noclone)) c (int i) { v++; }
     static void __attribute__((noinline, noclone)) a (int i);
     static void __attribute__((noinline, noclone)) b (int i) { a (i); }
     static void __attribute__((noinline, noclone)) a (int i)
     { if (i) b (i - 1); else c (0); }
     int main (void) { a (5); return 0; }

     (gdb) bt
     #0  c (i=i@entry=0) at t.c:2
     #1  0x0000000000400428 in a (DW_OP_GNU_entry_value resolving has found
     function "a" at 0x400420 can call itself via tail calls
     i=<optimized out>) at t.c:6
     #2  0x000000000040036e in main () at t.c:7

   GDB cannot find out from the inferior state if and how many times did
function `a' call itself (via function `b') as these calls would be
tail calls.  Such tail calls would modify thue `i' variable, therefore
GDB cannot be sure the value it knows would be right - GDB prints
`<optimized out>' instead.


File: gdb.info,  Node: Macros,  Next: Tracepoints,  Prev: Optimized Code,  Up: Top

12 C Preprocessor Macros
************************

Some languages, such as C and C++, provide a way to define and invoke
"preprocessor macros" which expand into strings of tokens.  GDB can
evaluate expressions containing macro invocations, show the result of
macro expansion, and show a macro's definition, including where it was
defined.

   You may need to compile your program specially to provide GDB with
information about preprocessor macros.  Most compilers do not include
macros in their debugging information, even when you compile with the
`-g' flag.  *Note Compilation::.

   A program may define a macro at one point, remove that definition
later, and then provide a different definition after that.  Thus, at
different points in the program, a macro may have different
definitions, or have no definition at all.  If there is a current stack
frame, GDB uses the macros in scope at that frame's source code line.
Otherwise, GDB uses the macros in scope at the current listing location;
see *Note List::.

   Whenever GDB evaluates an expression, it always expands any macro
invocations present in the expression.  GDB also provides the following
commands for working with macros explicitly.

`macro expand EXPRESSION'
`macro exp EXPRESSION'
     Show the results of expanding all preprocessor macro invocations in
     EXPRESSION.  Since GDB simply expands macros, but does not parse
     the result, EXPRESSION need not be a valid expression; it can be
     any string of tokens.

`macro expand-once EXPRESSION'
`macro exp1 EXPRESSION'
     (This command is not yet implemented.)  Show the results of
     expanding those preprocessor macro invocations that appear
     explicitly in EXPRESSION.  Macro invocations appearing in that
     expansion are left unchanged.  This command allows you to see the
     effect of a particular macro more clearly, without being confused
     by further expansions.  Since GDB simply expands macros, but does
     not parse the result, EXPRESSION need not be a valid expression; it
     can be any string of tokens.

`info macro [-a|-all] [--] MACRO'
     Show the current definition or all definitions of the named MACRO,
     and describe the source location or compiler command-line where
     that definition was established.  The optional double dash is to
     signify the end of argument processing and the beginning of MACRO
     for non C-like macros where the macro may begin with a hyphen.

`info macros LINESPEC'
     Show all macro definitions that are in effect at the location
     specified by LINESPEC,  and describe the source location or
     compiler command-line where those definitions were established.

`macro define MACRO REPLACEMENT-LIST'
`macro define MACRO(ARGLIST) REPLACEMENT-LIST'
     Introduce a definition for a preprocessor macro named MACRO,
     invocations of which are replaced by the tokens given in
     REPLACEMENT-LIST.  The first form of this command defines an
     "object-like" macro, which takes no arguments; the second form
     defines a "function-like" macro, which takes the arguments given in
     ARGLIST.

     A definition introduced by this command is in scope in every
     expression evaluated in GDB, until it is removed with the `macro
     undef' command, described below.  The definition overrides all
     definitions for MACRO present in the program being debugged, as
     well as any previous user-supplied definition.

`macro undef MACRO'
     Remove any user-supplied definition for the macro named MACRO.
     This command only affects definitions provided with the `macro
     define' command, described above; it cannot remove definitions
     present in the program being debugged.

`macro list'
     List all the macros defined using the `macro define' command.

   Here is a transcript showing the above commands in action.  First, we
show our source files:

     $ cat sample.c
     #include <stdio.h>
     #include "sample.h"

     #define M 42
     #define ADD(x) (M + x)

     main ()
     {
     #define N 28
       printf ("Hello, world!\n");
     #undef N
       printf ("We're so creative.\n");
     #define N 1729
       printf ("Goodbye, world!\n");
     }
     $ cat sample.h
     #define Q <
     $

   Now, we compile the program using the GNU C compiler, GCC.  We pass
the `-gdwarf-2'(1) _and_ `-g3' flags to ensure the compiler includes
information about preprocessor macros in the debugging information.

     $ gcc -gdwarf-2 -g3 sample.c -o sample
     $

   Now, we start GDB on our sample program:

     $ gdb -nw sample
     GNU gdb 2002-05-06-cvs
     Copyright 2002 Free Software Foundation, Inc.
     GDB is free software, ...
     (gdb)

   We can expand macros and examine their definitions, even when the
program is not running.  GDB uses the current listing position to
decide which macro definitions are in scope:

     (gdb) list main
     3
     4       #define M 42
     5       #define ADD(x) (M + x)
     6
     7       main ()
     8       {
     9       #define N 28
     10        printf ("Hello, world!\n");
     11      #undef N
     12        printf ("We're so creative.\n");
     (gdb) info macro ADD
     Defined at /home/jimb/gdb/macros/play/sample.c:5
     #define ADD(x) (M + x)
     (gdb) info macro Q
     Defined at /home/jimb/gdb/macros/play/sample.h:1
       included at /home/jimb/gdb/macros/play/sample.c:2
     #define Q <
     (gdb) macro expand ADD(1)
     expands to: (42 + 1)
     (gdb) macro expand-once ADD(1)
     expands to: once (M + 1)
     (gdb)

   In the example above, note that `macro expand-once' expands only the
macro invocation explicit in the original text -- the invocation of
`ADD' -- but does not expand the invocation of the macro `M', which was
introduced by `ADD'.

   Once the program is running, GDB uses the macro definitions in force
at the source line of the current stack frame:

     (gdb) break main
     Breakpoint 1 at 0x8048370: file sample.c, line 10.
     (gdb) run
     Starting program: /home/jimb/gdb/macros/play/sample

     Breakpoint 1, main () at sample.c:10
     10        printf ("Hello, world!\n");
     (gdb)

   At line 10, the definition of the macro `N' at line 9 is in force:

     (gdb) info macro N
     Defined at /home/jimb/gdb/macros/play/sample.c:9
     #define N 28
     (gdb) macro expand N Q M
     expands to: 28 < 42
     (gdb) print N Q M
     $1 = 1
     (gdb)

   As we step over directives that remove `N''s definition, and then
give it a new definition, GDB finds the definition (or lack thereof) in
force at each point:

     (gdb) next
     Hello, world!
     12        printf ("We're so creative.\n");
     (gdb) info macro N
     The symbol `N' has no definition as a C/C++ preprocessor macro
     at /home/jimb/gdb/macros/play/sample.c:12
     (gdb) next
     We're so creative.
     14        printf ("Goodbye, world!\n");
     (gdb) info macro N
     Defined at /home/jimb/gdb/macros/play/sample.c:13
     #define N 1729
     (gdb) macro expand N Q M
     expands to: 1729 < 42
     (gdb) print N Q M
     $2 = 0
     (gdb)

   In addition to source files, macros can be defined on the
compilation command line using the `-DNAME=VALUE' syntax.  For macros
defined in such a way, GDB displays the location of their definition as
line zero of the source file submitted to the compiler.

     (gdb) info macro __STDC__
     Defined at /home/jimb/gdb/macros/play/sample.c:0
     -D__STDC__=1
     (gdb)

   ---------- Footnotes ----------

   (1) This is the minimum.  Recent versions of GCC support `-gdwarf-3'
and `-gdwarf-4'; we recommend always choosing the most recent version
of DWARF.


File: gdb.info,  Node: Tracepoints,  Next: Overlays,  Prev: Macros,  Up: Top

13 Tracepoints
**************

In some applications, it is not feasible for the debugger to interrupt
the program's execution long enough for the developer to learn anything
helpful about its behavior.  If the program's correctness depends on
its real-time behavior, delays introduced by a debugger might cause the
program to change its behavior drastically, or perhaps fail, even when
the code itself is correct.  It is useful to be able to observe the
program's behavior without interrupting it.

   Using GDB's `trace' and `collect' commands, you can specify
locations in the program, called "tracepoints", and arbitrary
expressions to evaluate when those tracepoints are reached.  Later,
using the `tfind' command, you can examine the values those expressions
had when the program hit the tracepoints.  The expressions may also
denote objects in memory--structures or arrays, for example--whose
values GDB should record; while visiting a particular tracepoint, you
may inspect those objects as if they were in memory at that moment.
However, because GDB records these values without interacting with you,
it can do so quickly and unobtrusively, hopefully not disturbing the
program's behavior.

   The tracepoint facility is currently available only for remote
targets.  *Note Targets::.  In addition, your remote target must know
how to collect trace data.  This functionality is implemented in the
remote stub; however, none of the stubs distributed with GDB support
tracepoints as of this writing.  The format of the remote packets used
to implement tracepoints are described in *Note Tracepoint Packets::.

   It is also possible to get trace data from a file, in a manner
reminiscent of corefiles; you specify the filename, and use `tfind' to
search through the file.  *Note Trace Files::, for more details.

   This chapter describes the tracepoint commands and features.

* Menu:

* Set Tracepoints::
* Analyze Collected Data::
* Tracepoint Variables::
* Trace Files::


File: gdb.info,  Node: Set Tracepoints,  Next: Analyze Collected Data,  Up: Tracepoints

13.1 Commands to Set Tracepoints
================================

Before running such a "trace experiment", an arbitrary number of
tracepoints can be set.  A tracepoint is actually a special type of
breakpoint (*note Set Breaks::), so you can manipulate it using
standard breakpoint commands.  For instance, as with breakpoints,
tracepoint numbers are successive integers starting from one, and many
of the commands associated with tracepoints take the tracepoint number
as their argument, to identify which tracepoint to work on.

   For each tracepoint, you can specify, in advance, some arbitrary set
of data that you want the target to collect in the trace buffer when it
hits that tracepoint.  The collected data can include registers, local
variables, or global data.  Later, you can use GDB commands to examine
the values these data had at the time the tracepoint was hit.

   Tracepoints do not support every breakpoint feature.  Ignore counts
on tracepoints have no effect, and tracepoints cannot run GDB commands
when they are hit.  Tracepoints may not be thread-specific either.

   Some targets may support "fast tracepoints", which are inserted in a
different way (such as with a jump instead of a trap), that is faster
but possibly restricted in where they may be installed.

   Regular and fast tracepoints are dynamic tracing facilities, meaning
that they can be used to insert tracepoints at (almost) any location in
the target.  Some targets may also support controlling "static
tracepoints" from GDB.  With static tracing, a set of instrumentation
points, also known as "markers", are embedded in the target program,
and can be activated or deactivated by name or address.  These are
usually placed at locations which facilitate investigating what the
target is actually doing.  GDB's support for static tracing includes
being able to list instrumentation points, and attach them with GDB
defined high level tracepoints that expose the whole range of
convenience of GDB's tracepoints support.  Namely, support for
collecting registers values and values of global or local (to the
instrumentation point) variables; tracepoint conditions and trace state
variables.  The act of installing a GDB static tracepoint on an
instrumentation point, or marker, is referred to as "probing" a static
tracepoint marker.

   `gdbserver' supports tracepoints on some target systems.  *Note
Tracepoints support in `gdbserver': Server.

   This section describes commands to set tracepoints and associated
conditions and actions.

* Menu:

* Create and Delete Tracepoints::
* Enable and Disable Tracepoints::
* Tracepoint Passcounts::
* Tracepoint Conditions::
* Trace State Variables::
* Tracepoint Actions::
* Listing Tracepoints::
* Listing Static Tracepoint Markers::
* Starting and Stopping Trace Experiments::
* Tracepoint Restrictions::


File: gdb.info,  Node: Create and Delete Tracepoints,  Next: Enable and Disable Tracepoints,  Up: Set Tracepoints

13.1.1 Create and Delete Tracepoints
------------------------------------

`trace LOCATION'
     The `trace' command is very similar to the `break' command.  Its
     argument LOCATION can be a source line, a function name, or an
     address in the target program.  *Note Specify Location::.  The
     `trace' command defines a tracepoint, which is a point in the
     target program where the debugger will briefly stop, collect some
     data, and then allow the program to continue.  Setting a
     tracepoint or changing its actions takes effect immediately if the
     remote stub supports the `InstallInTrace' feature (*note install
     tracepoint in tracing::).  If remote stub doesn't support the
     `InstallInTrace' feature, all these changes don't take effect
     until the next `tstart' command, and once a trace experiment is
     running, further changes will not have any effect until the next
     trace experiment starts.  In addition, GDB supports "pending
     tracepoints"--tracepoints whose address is not yet resolved.
     (This is similar to pending breakpoints.)  Pending tracepoints are
     not downloaded to the target and not installed until they are
     resolved.  The resolution of pending tracepoints requires GDB
     support--when debugging with the remote target, and GDB
     disconnects from the remote stub (*note disconnected tracing::),
     pending tracepoints can not be resolved (and downloaded to the
     remote stub) while GDB is disconnected.

     Here are some examples of using the `trace' command:

          (gdb) trace foo.c:121    // a source file and line number

          (gdb) trace +2           // 2 lines forward

          (gdb) trace my_function  // first source line of function

          (gdb) trace *my_function // EXACT start address of function

          (gdb) trace *0x2117c4    // an address

     You can abbreviate `trace' as `tr'.

`trace LOCATION if COND'
     Set a tracepoint with condition COND; evaluate the expression COND
     each time the tracepoint is reached, and collect data only if the
     value is nonzero--that is, if COND evaluates as true.  *Note
     Tracepoint Conditions: Tracepoint Conditions, for more information
     on tracepoint conditions.

`ftrace LOCATION [ if COND ]'
     The `ftrace' command sets a fast tracepoint.  For targets that
     support them, fast tracepoints will use a more efficient but
     possibly less general technique to trigger data collection, such
     as a jump instruction instead of a trap, or some sort of hardware
     support.  It may not be possible to create a fast tracepoint at
     the desired location, in which case the command will exit with an
     explanatory message.

     GDB handles arguments to `ftrace' exactly as for `trace'.

     On 32-bit x86-architecture systems, fast tracepoints normally need
     to be placed at an instruction that is 5 bytes or longer, but can
     be placed at 4-byte instructions if the low 64K of memory of the
     target program is available to install trampolines.  Some
     Unix-type systems, such as GNU/Linux, exclude low addresses from
     the program's address space; but for instance with the Linux
     kernel it is possible to let GDB use this area by doing a `sysctl'
     command to set the `mmap_min_addr' kernel parameter, as in

          sudo sysctl -w vm.mmap_min_addr=32768

     which sets the low address to 32K, which leaves plenty of room for
     trampolines.  The minimum address should be set to a page boundary.

`strace LOCATION [ if COND ]'
     The `strace' command sets a static tracepoint.  For targets that
     support it, setting a static tracepoint probes a static
     instrumentation point, or marker, found at LOCATION.  It may not
     be possible to set a static tracepoint at the desired location, in
     which case the command will exit with an explanatory message.

     GDB handles arguments to `strace' exactly as for `trace', with the
     addition that the user can also specify `-m MARKER' as LOCATION.
     This probes the marker identified by the MARKER string identifier.
     This identifier depends on the static tracepoint backend library
     your program is using.  You can find all the marker identifiers in
     the `ID' field of the `info static-tracepoint-markers' command
     output.  *Note Listing Static Tracepoint Markers: Listing Static
     Tracepoint Markers.  For example, in the following small program
     using the UST tracing engine:

          main ()
          {
            trace_mark(ust, bar33, "str %s", "FOOBAZ");
          }

     the marker id is composed of joining the first two arguments to the
     `trace_mark' call with a slash, which translates to:

          (gdb) info static-tracepoint-markers
          Cnt Enb ID         Address            What
          1   n   ust/bar33  0x0000000000400ddc in main at stexample.c:22
                   Data: "str %s"
          [etc...]

     so you may probe the marker above with:

          (gdb) strace -m ust/bar33

     Static tracepoints accept an extra collect action -- `collect
     $_sdata'.  This collects arbitrary user data passed in the probe
     point call to the tracing library.  In the UST example above,
     you'll see that the third argument to `trace_mark' is a
     printf-like format string.  The user data is then the result of
     running that formating string against the following arguments.
     Note that `info static-tracepoint-markers' command output lists
     that format string in the `Data:' field.

     You can inspect this data when analyzing the trace buffer, by
     printing the $_sdata variable like any other variable available to
     GDB.  *Note Tracepoint Action Lists: Tracepoint Actions.

     The convenience variable `$tpnum' records the tracepoint number of
     the most recently set tracepoint.

`delete tracepoint [NUM]'
     Permanently delete one or more tracepoints.  With no argument, the
     default is to delete all tracepoints.  Note that the regular
     `delete' command can remove tracepoints also.

     Examples:

          (gdb) delete trace 1 2 3 // remove three tracepoints

          (gdb) delete trace       // remove all tracepoints

     You can abbreviate this command as `del tr'.


File: gdb.info,  Node: Enable and Disable Tracepoints,  Next: Tracepoint Passcounts,  Prev: Create and Delete Tracepoints,  Up: Set Tracepoints

13.1.2 Enable and Disable Tracepoints
-------------------------------------

These commands are deprecated; they are equivalent to plain `disable'
and `enable'.

`disable tracepoint [NUM]'
     Disable tracepoint NUM, or all tracepoints if no argument NUM is
     given.  A disabled tracepoint will have no effect during a trace
     experiment, but it is not forgotten.  You can re-enable a disabled
     tracepoint using the `enable tracepoint' command.  If the command
     is issued during a trace experiment and the debug target has
     support for disabling tracepoints during a trace experiment, then
     the change will be effective immediately.  Otherwise, it will be
     applied to the next trace experiment.

`enable tracepoint [NUM]'
     Enable tracepoint NUM, or all tracepoints.  If this command is
     issued during a trace experiment and the debug target supports
     enabling tracepoints during a trace experiment, then the enabled
     tracepoints will become effective immediately.  Otherwise, they
     will become effective the next time a trace experiment is run.


File: gdb.info,  Node: Tracepoint Passcounts,  Next: Tracepoint Conditions,  Prev: Enable and Disable Tracepoints,  Up: Set Tracepoints

13.1.3 Tracepoint Passcounts
----------------------------

`passcount [N [NUM]]'
     Set the "passcount" of a tracepoint.  The passcount is a way to
     automatically stop a trace experiment.  If a tracepoint's
     passcount is N, then the trace experiment will be automatically
     stopped on the N'th time that tracepoint is hit.  If the
     tracepoint number NUM is not specified, the `passcount' command
     sets the passcount of the most recently defined tracepoint.  If no
     passcount is given, the trace experiment will run until stopped
     explicitly by the user.

     Examples:

          (gdb) passcount 5 2 // Stop on the 5th execution of
                                        `// tracepoint 2'

          (gdb) passcount 12  // Stop on the 12th execution of the
                                        `// most recently defined tracepoint.'
          (gdb) trace foo
          (gdb) pass 3
          (gdb) trace bar
          (gdb) pass 2
          (gdb) trace baz
          (gdb) pass 1        // Stop tracing when foo has been
                                         `// executed 3 times OR when bar has'
                                         `// been executed 2 times'
                                         `// OR when baz has been executed 1 time.'



File: gdb.info,  Node: Tracepoint Conditions,  Next: Trace State Variables,  Prev: Tracepoint Passcounts,  Up: Set Tracepoints

13.1.4 Tracepoint Conditions
----------------------------

The simplest sort of tracepoint collects data every time your program
reaches a specified place.  You can also specify a "condition" for a
tracepoint.  A condition is just a Boolean expression in your
programming language (*note Expressions: Expressions.).  A tracepoint
with a condition evaluates the expression each time your program
reaches it, and data collection happens only if the condition is true.

   Tracepoint conditions can be specified when a tracepoint is set, by
using `if' in the arguments to the `trace' command.  *Note Setting
Tracepoints: Create and Delete Tracepoints.  They can also be set or
changed at any time with the `condition' command, just as with
breakpoints.

   Unlike breakpoint conditions, GDB does not actually evaluate the
conditional expression itself.  Instead, GDB encodes the expression
into an agent expression (*note Agent Expressions::) suitable for
execution on the target, independently of GDB.  Global variables become
raw memory locations, locals become stack accesses, and so forth.

   For instance, suppose you have a function that is usually called
frequently, but should not be called after an error has occurred.  You
could use the following tracepoint command to collect data about calls
of that function that happen while the error code is propagating
through the program; an unconditional tracepoint could end up
collecting thousands of useless trace frames that you would have to
search through.

     (gdb) trace normal_operation if errcode > 0


File: gdb.info,  Node: Trace State Variables,  Next: Tracepoint Actions,  Prev: Tracepoint Conditions,  Up: Set Tracepoints

13.1.5 Trace State Variables
----------------------------

A "trace state variable" is a special type of variable that is created
and managed by target-side code.  The syntax is the same as that for
GDB's convenience variables (a string prefixed with "$"), but they are
stored on the target.  They must be created explicitly, using a
`tvariable' command.  They are always 64-bit signed integers.

   Trace state variables are remembered by GDB, and downloaded to the
target along with tracepoint information when the trace experiment
starts.  There are no intrinsic limits on the number of trace state
variables, beyond memory limitations of the target.

   Although trace state variables are managed by the target, you can use
them in print commands and expressions as if they were convenience
variables; GDB will get the current value from the target while the
trace experiment is running.  Trace state variables share the same
namespace as other "$" variables, which means that you cannot have
trace state variables with names like `$23' or `$pc', nor can you have
a trace state variable and a convenience variable with the same name.

`tvariable $NAME [ = EXPRESSION ]'
     The `tvariable' command creates a new trace state variable named
     `$NAME', and optionally gives it an initial value of EXPRESSION.
     EXPRESSION is evaluated when this command is entered; the result
     will be converted to an integer if possible, otherwise GDB will
     report an error. A subsequent `tvariable' command specifying the
     same name does not create a variable, but instead assigns the
     supplied initial value to the existing variable of that name,
     overwriting any previous initial value. The default initial value
     is 0.

`info tvariables'
     List all the trace state variables along with their initial values.
     Their current values may also be displayed, if the trace
     experiment is currently running.

`delete tvariable [ $NAME ... ]'
     Delete the given trace state variables, or all of them if no
     arguments are specified.



File: gdb.info,  Node: Tracepoint Actions,  Next: Listing Tracepoints,  Prev: Trace State Variables,  Up: Set Tracepoints

13.1.6 Tracepoint Action Lists
------------------------------

`actions [NUM]'
     This command will prompt for a list of actions to be taken when the
     tracepoint is hit.  If the tracepoint number NUM is not specified,
     this command sets the actions for the one that was most recently
     defined (so that you can define a tracepoint and then say
     `actions' without bothering about its number).  You specify the
     actions themselves on the following lines, one action at a time,
     and terminate the actions list with a line containing just `end'.
     So far, the only defined actions are `collect', `teval', and
     `while-stepping'.

     `actions' is actually equivalent to `commands' (*note Breakpoint
     Command Lists: Break Commands.), except that only the defined
     actions are allowed; any other GDB command is rejected.

     To remove all actions from a tracepoint, type `actions NUM' and
     follow it immediately with `end'.

          (gdb) collect DATA // collect some data

          (gdb) while-stepping 5 // single-step 5 times, collect data

          (gdb) end              // signals the end of actions.

     In the following example, the action list begins with `collect'
     commands indicating the things to be collected when the tracepoint
     is hit.  Then, in order to single-step and collect additional data
     following the tracepoint, a `while-stepping' command is used,
     followed by the list of things to be collected after each step in a
     sequence of single steps.  The `while-stepping' command is
     terminated by its own separate `end' command.  Lastly, the action
     list is terminated by an `end' command.

          (gdb) trace foo
          (gdb) actions
          Enter actions for tracepoint 1, one per line:
          > collect bar,baz
          > collect $regs
          > while-stepping 12
            > collect $pc, arr[i]
            > end
          end

`collect[/MODS] EXPR1, EXPR2, ...'
     Collect values of the given expressions when the tracepoint is hit.
     This command accepts a comma-separated list of any valid
     expressions.  In addition to global, static, or local variables,
     the following special arguments are supported:

    `$regs'
          Collect all registers.

    `$args'
          Collect all function arguments.

    `$locals'
          Collect all local variables.

    `$_ret'
          Collect the return address.  This is helpful if you want to
          see more of a backtrace.

    `$_probe_argc'
          Collects the number of arguments from the static probe at
          which the tracepoint is located.  *Note Static Probe Points::.

    `$_probe_argN'
          N is an integer between 0 and 11.  Collects the Nth argument
          from the static probe at which the tracepoint is located.
          *Note Static Probe Points::.

    `$_sdata'
          Collect static tracepoint marker specific data.  Only
          available for static tracepoints.  *Note Tracepoint Action
          Lists: Tracepoint Actions.  On the UST static tracepoints
          library backend, an instrumentation point resembles a
          `printf' function call.  The tracing library is able to
          collect user specified data formatted to a character string
          using the format provided by the programmer that instrumented
          the program.  Other backends have similar mechanisms.  Here's
          an example of a UST marker call:

                const char master_name[] = "$your_name";
                trace_mark(channel1, marker1, "hello %s", master_name)

          In this case, collecting `$_sdata' collects the string `hello
          $yourname'.  When analyzing the trace buffer, you can inspect
          `$_sdata' like any other variable available to GDB.

     You can give several consecutive `collect' commands, each one with
     a single argument, or one `collect' command with several arguments
     separated by commas; the effect is the same.

     The optional MODS changes the usual handling of the arguments.
     `s' requests that pointers to chars be handled as strings, in
     particular collecting the contents of the memory being pointed at,
     up to the first zero.  The upper bound is by default the value of
     the `print elements' variable; if `s' is followed by a decimal
     number, that is the upper bound instead.  So for instance
     `collect/s25 mystr' collects as many as 25 characters at `mystr'.

     The command `info scope' (*note info scope: Symbols.) is
     particularly useful for figuring out what data to collect.

`teval EXPR1, EXPR2, ...'
     Evaluate the given expressions when the tracepoint is hit.  This
     command accepts a comma-separated list of expressions.  The results
     are discarded, so this is mainly useful for assigning values to
     trace state variables (*note Trace State Variables::) without
     adding those values to the trace buffer, as would be the case if
     the `collect' action were used.

`while-stepping N'
     Perform N single-step instruction traces after the tracepoint,
     collecting new data after each step.  The `while-stepping' command
     is followed by the list of what to collect while stepping
     (followed by its own `end' command):

          > while-stepping 12
            > collect $regs, myglobal
            > end
          >

     Note that `$pc' is not automatically collected by
     `while-stepping'; you need to explicitly collect that register if
     you need it.  You may abbreviate `while-stepping' as `ws' or
     `stepping'.

`set default-collect EXPR1, EXPR2, ...'
     This variable is a list of expressions to collect at each
     tracepoint hit.  It is effectively an additional `collect' action
     prepended to every tracepoint action list.  The expressions are
     parsed individually for each tracepoint, so for instance a
     variable named `xyz' may be interpreted as a global for one
     tracepoint, and a local for another, as appropriate to the
     tracepoint's location.

`show default-collect'
     Show the list of expressions that are collected by default at each
     tracepoint hit.



File: gdb.info,  Node: Listing Tracepoints,  Next: Listing Static Tracepoint Markers,  Prev: Tracepoint Actions,  Up: Set Tracepoints

13.1.7 Listing Tracepoints
--------------------------

`info tracepoints [NUM...]'
     Display information about the tracepoint NUM.  If you don't
     specify a tracepoint number, displays information about all the
     tracepoints defined so far.  The format is similar to that used for
     `info breakpoints'; in fact, `info tracepoints' is the same
     command, simply restricting itself to tracepoints.

     A tracepoint's listing may include additional information specific
     to tracing:

        * its passcount as given by the `passcount N' command

          (gdb) info trace
          Num     Type           Disp Enb Address    What
          1       tracepoint     keep y   0x0804ab57 in foo() at main.cxx:7
                  while-stepping 20
                    collect globfoo, $regs
                  end
                  collect globfoo2
                  end
                  pass count 1200
          (gdb)

     This command can be abbreviated `info tp'.


File: gdb.info,  Node: Listing Static Tracepoint Markers,  Next: Starting and Stopping Trace Experiments,  Prev: Listing Tracepoints,  Up: Set Tracepoints

13.1.8 Listing Static Tracepoint Markers
----------------------------------------

`info static-tracepoint-markers'
     Display information about all static tracepoint markers defined in
     the program.

     For each marker, the following columns are printed:

    _Count_
          An incrementing counter, output to help readability.  This is
          not a stable identifier.

    _ID_
          The marker ID, as reported by the target.

    _Enabled or Disabled_
          Probed markers are tagged with `y'.  `n' identifies marks
          that are not enabled.

    _Address_
          Where the marker is in your program, as a memory address.

    _What_
          Where the marker is in the source for your program, as a file
          and line number.  If the debug information included in the
          program does not allow GDB to locate the source of the
          marker, this column will be left blank.

     In addition, the following information may be printed for each
     marker:

    _Data_
          User data passed to the tracing library by the marker call.
          In the UST backend, this is the format string passed as
          argument to the marker call.

    _Static tracepoints probing the marker_
          The list of static tracepoints attached to the marker.

          (gdb) info static-tracepoint-markers
          Cnt ID         Enb Address            What
          1   ust/bar2   y   0x0000000000400e1a in main at stexample.c:25
               Data: number1 %d number2 %d
               Probed by static tracepoints: #2
          2   ust/bar33  n   0x0000000000400c87 in main at stexample.c:24
               Data: str %s
          (gdb)


File: gdb.info,  Node: Starting and Stopping Trace Experiments,  Next: Tracepoint Restrictions,  Prev: Listing Static Tracepoint Markers,  Up: Set Tracepoints

13.1.9 Starting and Stopping Trace Experiments
----------------------------------------------

`tstart'
     This command starts the trace experiment, and begins collecting
     data.  It has the side effect of discarding all the data collected
     in the trace buffer during the previous trace experiment.  If any
     arguments are supplied, they are taken as a note and stored with
     the trace experiment's state.  The notes may be arbitrary text,
     and are especially useful with disconnected tracing in a
     multi-user context; the notes can explain what the trace is doing,
     supply user contact information, and so forth.

`tstop'
     This command stops the trace experiment.  If any arguments are
     supplied, they are recorded with the experiment as a note.  This is
     useful if you are stopping a trace started by someone else, for
     instance if the trace is interfering with the system's behavior and
     needs to be stopped quickly.

     *Note*: a trace experiment and data collection may stop
     automatically if any tracepoint's passcount is reached (*note
     Tracepoint Passcounts::), or if the trace buffer becomes full.

`tstatus'
     This command displays the status of the current trace data
     collection.

   Here is an example of the commands we described so far:

     (gdb) trace gdb_c_test
     (gdb) actions
     Enter actions for tracepoint #1, one per line.
     > collect $regs,$locals,$args
     > while-stepping 11
       > collect $regs
       > end
     > end
     (gdb) tstart
     	[time passes ...]
     (gdb) tstop

   You can choose to continue running the trace experiment even if GDB
disconnects from the target, voluntarily or involuntarily.  For
commands such as `detach', the debugger will ask what you want to do
with the trace.  But for unexpected terminations (GDB crash, network
outage), it would be unfortunate to lose hard-won trace data, so the
variable `disconnected-tracing' lets you decide whether the trace should
continue running without GDB.

`set disconnected-tracing on'
`set disconnected-tracing off'
     Choose whether a tracing run should continue to run if GDB has
     disconnected from the target.  Note that `detach' or `quit' will
     ask you directly what to do about a running trace no matter what
     this variable's setting, so the variable is mainly useful for
     handling unexpected situations, such as loss of the network.

`show disconnected-tracing'
     Show the current choice for disconnected tracing.


   When you reconnect to the target, the trace experiment may or may not
still be running; it might have filled the trace buffer in the
meantime, or stopped for one of the other reasons.  If it is running,
it will continue after reconnection.

   Upon reconnection, the target will upload information about the
tracepoints in effect.  GDB will then compare that information to the
set of tracepoints currently defined, and attempt to match them up,
allowing for the possibility that the numbers may have changed due to
creation and deletion in the meantime.  If one of the target's
tracepoints does not match any in GDB, the debugger will create a new
tracepoint, so that you have a number with which to specify that
tracepoint.  This matching-up process is necessarily heuristic, and it
may result in useless tracepoints being created; you may simply delete
them if they are of no use.

   If your target agent supports a "circular trace buffer", then you
can run a trace experiment indefinitely without filling the trace
buffer; when space runs out, the agent deletes already-collected trace
frames, oldest first, until there is enough room to continue
collecting.  This is especially useful if your tracepoints are being
hit too often, and your trace gets terminated prematurely because the
buffer is full.  To ask for a circular trace buffer, simply set
`circular-trace-buffer' to on.  You can set this at any time, including
during tracing; if the agent can do it, it will change buffer handling
on the fly, otherwise it will not take effect until the next run.

`set circular-trace-buffer on'
`set circular-trace-buffer off'
     Choose whether a tracing run should use a linear or circular buffer
     for trace data.  A linear buffer will not lose any trace data, but
     may fill up prematurely, while a circular buffer will discard old
     trace data, but it will have always room for the latest tracepoint
     hits.

`show circular-trace-buffer'
     Show the current choice for the trace buffer.  Note that this may
     not match the agent's current buffer handling, nor is it
     guaranteed to match the setting that might have been in effect
     during a past run, for instance if you are looking at frames from
     a trace file.


`set trace-user TEXT'

`show trace-user'

`set trace-notes TEXT'
     Set the trace run's notes.

`show trace-notes'
     Show the trace run's notes.

`set trace-stop-notes TEXT'
     Set the trace run's stop notes.  The handling of the note is as for
     `tstop' arguments; the set command is convenient way to fix a stop
     note that is mistaken or incomplete.

`show trace-stop-notes'
     Show the trace run's stop notes.



File: gdb.info,  Node: Tracepoint Restrictions,  Prev: Starting and Stopping Trace Experiments,  Up: Set Tracepoints

13.1.10 Tracepoint Restrictions
-------------------------------

There are a number of restrictions on the use of tracepoints.  As
described above, tracepoint data gathering occurs on the target without
interaction from GDB.  Thus the full capabilities of the debugger are
not available during data gathering, and then at data examination time,
you will be limited by only having what was collected.  The following
items describe some common problems, but it is not exhaustive, and you
may run into additional difficulties not mentioned here.

   * Tracepoint expressions are intended to gather objects (lvalues).
     Thus the full flexibility of GDB's expression evaluator is not
     available.  You cannot call functions, cast objects to aggregate
     types, access convenience variables or modify values (except by
     assignment to trace state variables).  Some language features may
     implicitly call functions (for instance Objective-C fields with
     accessors), and therefore cannot be collected either.

   * Collection of local variables, either individually or in bulk with
     `$locals' or `$args', during `while-stepping' may behave
     erratically.  The stepping action may enter a new scope (for
     instance by stepping into a function), or the location of the
     variable may change (for instance it is loaded into a register).
     The tracepoint data recorded uses the location information for the
     variables that is correct for the tracepoint location.  When the
     tracepoint is created, it is not possible, in general, to determine
     where the steps of a `while-stepping' sequence will advance the
     program--particularly if a conditional branch is stepped.

   * Collection of an incompletely-initialized or partially-destroyed
     object may result in something that GDB cannot display, or displays
     in a misleading way.

   * When GDB displays a pointer to character it automatically
     dereferences the pointer to also display characters of the string
     being pointed to.  However, collecting the pointer during tracing
     does not automatically collect the string.  You need to explicitly
     dereference the pointer and provide size information if you want to
     collect not only the pointer, but the memory pointed to.  For
     example, `*ptr@50' can be used to collect the 50 element array
     pointed to by `ptr'.

   * It is not possible to collect a complete stack backtrace at a
     tracepoint.  Instead, you may collect the registers and a few
     hundred bytes from the stack pointer with something like
     `*(unsigned char *)$esp@300' (adjust to use the name of the actual
     stack pointer register on your target architecture, and the amount
     of stack you wish to capture).  Then the `backtrace' command will
     show a partial backtrace when using a trace frame.  The number of
     stack frames that can be examined depends on the sizes of the
     frames in the collected stack.  Note that if you ask for a block
     so large that it goes past the bottom of the stack, the target
     agent may report an error trying to read from an invalid address.

   * If you do not collect registers at a tracepoint, GDB can infer
     that the value of `$pc' must be the same as the address of the
     tracepoint and use that when you are looking at a trace frame for
     that tracepoint.  However, this cannot work if the tracepoint has
     multiple locations (for instance if it was set in a function that
     was inlined), or if it has a `while-stepping' loop.  In those cases
     GDB will warn you that it can't infer `$pc', and default it to
     zero.



File: gdb.info,  Node: Analyze Collected Data,  Next: Tracepoint Variables,  Prev: Set Tracepoints,  Up: Tracepoints

13.2 Using the Collected Data
=============================

After the tracepoint experiment ends, you use GDB commands for
examining the trace data.  The basic idea is that each tracepoint
collects a trace "snapshot" every time it is hit and another snapshot
every time it single-steps.  All these snapshots are consecutively
numbered from zero and go into a buffer, and you can examine them
later.  The way you examine them is to "focus" on a specific trace
snapshot.  When the remote stub is focused on a trace snapshot, it will
respond to all GDB requests for memory and registers by reading from
the buffer which belongs to that snapshot, rather than from _real_
memory or registers of the program being debugged.  This means that
*all* GDB commands (`print', `info registers', `backtrace', etc.) will
behave as if we were currently debugging the program state as it was
when the tracepoint occurred.  Any requests for data that are not in
the buffer will fail.

* Menu:

* tfind::                       How to select a trace snapshot
* tdump::                       How to display all data for a snapshot
* save tracepoints::            How to save tracepoints for a future run


File: gdb.info,  Node: tfind,  Next: tdump,  Up: Analyze Collected Data

13.2.1 `tfind N'
----------------

The basic command for selecting a trace snapshot from the buffer is
`tfind N', which finds trace snapshot number N, counting from zero.  If
no argument N is given, the next snapshot is selected.

   Here are the various forms of using the `tfind' command.

`tfind start'
     Find the first snapshot in the buffer.  This is a synonym for
     `tfind 0' (since 0 is the number of the first snapshot).

`tfind none'
     Stop debugging trace snapshots, resume _live_ debugging.

`tfind end'
     Same as `tfind none'.

`tfind'
     No argument means find the next trace snapshot.

`tfind -'
     Find the previous trace snapshot before the current one.  This
     permits retracing earlier steps.

`tfind tracepoint NUM'
     Find the next snapshot associated with tracepoint NUM.  Search
     proceeds forward from the last examined trace snapshot.  If no
     argument NUM is given, it means find the next snapshot collected
     for the same tracepoint as the current snapshot.

`tfind pc ADDR'
     Find the next snapshot associated with the value ADDR of the
     program counter.  Search proceeds forward from the last examined
     trace snapshot.  If no argument ADDR is given, it means find the
     next snapshot with the same value of PC as the current snapshot.

`tfind outside ADDR1, ADDR2'
     Find the next snapshot whose PC is outside the given range of
     addresses (exclusive).

`tfind range ADDR1, ADDR2'
     Find the next snapshot whose PC is between ADDR1 and ADDR2
     (inclusive).

`tfind line [FILE:]N'
     Find the next snapshot associated with the source line N.  If the
     optional argument FILE is given, refer to line N in that source
     file.  Search proceeds forward from the last examined trace
     snapshot.  If no argument N is given, it means find the next line
     other than the one currently being examined; thus saying `tfind
     line' repeatedly can appear to have the same effect as stepping
     from line to line in a _live_ debugging session.

   The default arguments for the `tfind' commands are specifically
designed to make it easy to scan through the trace buffer.  For
instance, `tfind' with no argument selects the next trace snapshot, and
`tfind -' with no argument selects the previous trace snapshot.  So, by
giving one `tfind' command, and then simply hitting <RET> repeatedly
you can examine all the trace snapshots in order.  Or, by saying `tfind
-' and then hitting <RET> repeatedly you can examine the snapshots in
reverse order.  The `tfind line' command with no argument selects the
snapshot for the next source line executed.  The `tfind pc' command with
no argument selects the next snapshot with the same program counter
(PC) as the current frame.  The `tfind tracepoint' command with no
argument selects the next trace snapshot collected by the same
tracepoint as the current one.

   In addition to letting you scan through the trace buffer manually,
these commands make it easy to construct GDB scripts that scan through
the trace buffer and print out whatever collected data you are
interested in.  Thus, if we want to examine the PC, FP, and SP
registers from each trace frame in the buffer, we can say this:

     (gdb) tfind start
     (gdb) while ($trace_frame != -1)
     > printf "Frame %d, PC = %08X, SP = %08X, FP = %08X\n", \
               $trace_frame, $pc, $sp, $fp
     > tfind
     > end

     Frame 0, PC = 0020DC64, SP = 0030BF3C, FP = 0030BF44
     Frame 1, PC = 0020DC6C, SP = 0030BF38, FP = 0030BF44
     Frame 2, PC = 0020DC70, SP = 0030BF34, FP = 0030BF44
     Frame 3, PC = 0020DC74, SP = 0030BF30, FP = 0030BF44
     Frame 4, PC = 0020DC78, SP = 0030BF2C, FP = 0030BF44
     Frame 5, PC = 0020DC7C, SP = 0030BF28, FP = 0030BF44
     Frame 6, PC = 0020DC80, SP = 0030BF24, FP = 0030BF44
     Frame 7, PC = 0020DC84, SP = 0030BF20, FP = 0030BF44
     Frame 8, PC = 0020DC88, SP = 0030BF1C, FP = 0030BF44
     Frame 9, PC = 0020DC8E, SP = 0030BF18, FP = 0030BF44
     Frame 10, PC = 00203F6C, SP = 0030BE3C, FP = 0030BF14

   Or, if we want to examine the variable `X' at each source line in
the buffer:

     (gdb) tfind start
     (gdb) while ($trace_frame != -1)
     > printf "Frame %d, X == %d\n", $trace_frame, X
     > tfind line
     > end

     Frame 0, X = 1
     Frame 7, X = 2
     Frame 13, X = 255


File: gdb.info,  Node: tdump,  Next: save tracepoints,  Prev: tfind,  Up: Analyze Collected Data

13.2.2 `tdump'
--------------

This command takes no arguments.  It prints all the data collected at
the current trace snapshot.

     (gdb) trace 444
     (gdb) actions
     Enter actions for tracepoint #2, one per line:
     > collect $regs, $locals, $args, gdb_long_test
     > end

     (gdb) tstart

     (gdb) tfind line 444
     #0  gdb_test (p1=0x11, p2=0x22, p3=0x33, p4=0x44, p5=0x55, p6=0x66)
     at gdb_test.c:444
     444        printp( "%s: arguments = 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X\n", )

     (gdb) tdump
     Data collected at tracepoint 2, trace frame 1:
     d0             0xc4aa0085       -995491707
     d1             0x18     24
     d2             0x80     128
     d3             0x33     51
     d4             0x71aea3d        119204413
     d5             0x22     34
     d6             0xe0     224
     d7             0x380035 3670069
     a0             0x19e24a 1696330
     a1             0x3000668        50333288
     a2             0x100    256
     a3             0x322000 3284992
     a4             0x3000698        50333336
     a5             0x1ad3cc 1758156
     fp             0x30bf3c 0x30bf3c
     sp             0x30bf34 0x30bf34
     ps             0x0      0
     pc             0x20b2c8 0x20b2c8
     fpcontrol      0x0      0
     fpstatus       0x0      0
     fpiaddr        0x0      0
     p = 0x20e5b4 "gdb-test"
     p1 = (void *) 0x11
     p2 = (void *) 0x22
     p3 = (void *) 0x33
     p4 = (void *) 0x44
     p5 = (void *) 0x55
     p6 = (void *) 0x66
     gdb_long_test = 17 '\021'

     (gdb)

   `tdump' works by scanning the tracepoint's current collection
actions and printing the value of each expression listed.  So `tdump'
can fail, if after a run, you change the tracepoint's actions to
mention variables that were not collected during the run.

   Also, for tracepoints with `while-stepping' loops, `tdump' uses the
collected value of `$pc' to distinguish between trace frames that were
collected at the tracepoint hit, and frames that were collected while
stepping.  This allows it to correctly choose whether to display the
basic list of collections, or the collections from the body of the
while-stepping loop.  However, if `$pc' was not collected, then `tdump'
will always attempt to dump using the basic collection list, and may
fail if a while-stepping frame does not include all the same data that
is collected at the tracepoint hit.


File: gdb.info,  Node: save tracepoints,  Prev: tdump,  Up: Analyze Collected Data

13.2.3 `save tracepoints FILENAME'
----------------------------------

This command saves all current tracepoint definitions together with
their actions and passcounts, into a file `FILENAME' suitable for use
in a later debugging session.  To read the saved tracepoint
definitions, use the `source' command (*note Command Files::).  The
`save-tracepoints' command is a deprecated alias for `save tracepoints'


File: gdb.info,  Node: Tracepoint Variables,  Next: Trace Files,  Prev: Analyze Collected Data,  Up: Tracepoints

13.3 Convenience Variables for Tracepoints
==========================================

`(int) $trace_frame'
     The current trace snapshot (a.k.a. "frame") number, or -1 if no
     snapshot is selected.

`(int) $tracepoint'
     The tracepoint for the current trace snapshot.

`(int) $trace_line'
     The line number for the current trace snapshot.

`(char []) $trace_file'
     The source file for the current trace snapshot.

`(char []) $trace_func'
     The name of the function containing `$tracepoint'.

   Note: `$trace_file' is not suitable for use in `printf', use
`output' instead.

   Here's a simple example of using these convenience variables for
stepping through all the trace snapshots and printing some of their
data.  Note that these are not the same as trace state variables, which
are managed by the target.

     (gdb) tfind start

     (gdb) while $trace_frame != -1
     > output $trace_file
     > printf ", line %d (tracepoint #%d)\n", $trace_line, $tracepoint
     > tfind
     > end


File: gdb.info,  Node: Trace Files,  Prev: Tracepoint Variables,  Up: Tracepoints

13.4 Using Trace Files
======================

In some situations, the target running a trace experiment may no longer
be available; perhaps it crashed, or the hardware was needed for a
different activity.  To handle these cases, you can arrange to dump the
trace data into a file, and later use that file as a source of trace
data, via the `target tfile' command.

`tsave [ -r ] FILENAME'
     Save the trace data to FILENAME.  By default, this command assumes
     that FILENAME refers to the host filesystem, so if necessary GDB
     will copy raw trace data up from the target and then save it.  If
     the target supports it, you can also supply the optional argument
     `-r' ("remote") to direct the target to save the data directly
     into FILENAME in its own filesystem, which may be more efficient
     if the trace buffer is very large.  (Note, however, that `target
     tfile' can only read from files accessible to the host.)

`target tfile FILENAME'
     Use the file named FILENAME as a source of trace data.  Commands
     that examine data work as they do with a live target, but it is not
     possible to run any new trace experiments.  `tstatus' will report
     the state of the trace run at the moment the data was saved, as
     well as the current trace frame you are examining.  FILENAME must
     be on a filesystem accessible to the host.



File: gdb.info,  Node: Overlays,  Next: Languages,  Prev: Tracepoints,  Up: Top

14 Debugging Programs That Use Overlays
***************************************

If your program is too large to fit completely in your target system's
memory, you can sometimes use "overlays" to work around this problem.
GDB provides some support for debugging programs that use overlays.

* Menu:

* How Overlays Work::              A general explanation of overlays.
* Overlay Commands::               Managing overlays in GDB.
* Automatic Overlay Debugging::    GDB can find out which overlays are
                                   mapped by asking the inferior.
* Overlay Sample Program::         A sample program using overlays.


File: gdb.info,  Node: How Overlays Work,  Next: Overlay Commands,  Up: Overlays

14.1 How Overlays Work
======================

Suppose you have a computer whose instruction address space is only 64
kilobytes long, but which has much more memory which can be accessed by
other means: special instructions, segment registers, or memory
management hardware, for example.  Suppose further that you want to
adapt a program which is larger than 64 kilobytes to run on this system.

   One solution is to identify modules of your program which are
relatively independent, and need not call each other directly; call
these modules "overlays".  Separate the overlays from the main program,
and place their machine code in the larger memory.  Place your main
program in instruction memory, but leave at least enough space there to
hold the largest overlay as well.

   Now, to call a function located in an overlay, you must first copy
that overlay's machine code from the large memory into the space set
aside for it in the instruction memory, and then jump to its entry point
there.

         Data             Instruction            Larger
     Address Space       Address Space        Address Space
     +-----------+       +-----------+        +-----------+
     |           |       |           |        |           |
     +-----------+       +-----------+        +-----------+<-- overlay 1
     | program   |       |   main    |   .----| overlay 1 | load address
     | variables |       |  program  |   |    +-----------+
     | and heap  |       |           |   |    |           |
     +-----------+       |           |   |    +-----------+<-- overlay 2
     |           |       +-----------+   |    |           | load address
     +-----------+       |           |   |  .-| overlay 2 |
                         |           |   |  | |           |
              mapped --->+-----------+   |  | +-----------+
              address    |           |   |  | |           |
                         |  overlay  | <-'  | |           |
                         |   area    |  <---' +-----------+<-- overlay 3
                         |           | <---.  |           | load address
                         +-----------+     `--| overlay 3 |
                         |           |        |           |
                         +-----------+        |           |
                                              +-----------+
                                              |           |
                                              +-----------+

                         A code overlay

   The diagram (*note A code overlay::) shows a system with separate
data and instruction address spaces.  To map an overlay, the program
copies its code from the larger address space to the instruction
address space.  Since the overlays shown here all use the same mapped
address, only one may be mapped at a time.  For a system with a single
address space for data and instructions, the diagram would be similar,
except that the program variables and heap would share an address space
with the main program and the overlay area.

   An overlay loaded into instruction memory and ready for use is
called a "mapped" overlay; its "mapped address" is its address in the
instruction memory.  An overlay not present (or only partially present)
in instruction memory is called "unmapped"; its "load address" is its
address in the larger memory.  The mapped address is also called the
"virtual memory address", or "VMA"; the load address is also called the
"load memory address", or "LMA".

   Unfortunately, overlays are not a completely transparent way to
adapt a program to limited instruction memory.  They introduce a new
set of global constraints you must keep in mind as you design your
program:

   * Before calling or returning to a function in an overlay, your
     program must make sure that overlay is actually mapped.
     Otherwise, the call or return will transfer control to the right
     address, but in the wrong overlay, and your program will probably
     crash.

   * If the process of mapping an overlay is expensive on your system,
     you will need to choose your overlays carefully to minimize their
     effect on your program's performance.

   * The executable file you load onto your system must contain each
     overlay's instructions, appearing at the overlay's load address,
     not its mapped address.  However, each overlay's instructions must
     be relocated and its symbols defined as if the overlay were at its
     mapped address.  You can use GNU linker scripts to specify
     different load and relocation addresses for pieces of your
     program; see *Note Overlay Description: (ld.info)Overlay
     Description.

   * The procedure for loading executable files onto your system must
     be able to load their contents into the larger address space as
     well as the instruction and data spaces.


   The overlay system described above is rather simple, and could be
improved in many ways:

   * If your system has suitable bank switch registers or memory
     management hardware, you could use those facilities to make an
     overlay's load area contents simply appear at their mapped address
     in instruction space.  This would probably be faster than copying
     the overlay to its mapped area in the usual way.

   * If your overlays are small enough, you could set aside more than
     one overlay area, and have more than one overlay mapped at a time.

   * You can use overlays to manage data, as well as instructions.  In
     general, data overlays are even less transparent to your design
     than code overlays: whereas code overlays only require care when
     you call or return to functions, data overlays require care every
     time you access the data.  Also, if you change the contents of a
     data overlay, you must copy its contents back out to its load
     address before you can copy a different data overlay into the same
     mapped area.



File: gdb.info,  Node: Overlay Commands,  Next: Automatic Overlay Debugging,  Prev: How Overlays Work,  Up: Overlays

14.2 Overlay Commands
=====================

To use GDB's overlay support, each overlay in your program must
correspond to a separate section of the executable file.  The section's
virtual memory address and load memory address must be the overlay's
mapped and load addresses.  Identifying overlays with sections allows
GDB to determine the appropriate address of a function or variable,
depending on whether the overlay is mapped or not.

   GDB's overlay commands all start with the word `overlay'; you can
abbreviate this as `ov' or `ovly'.  The commands are:

`overlay off'
     Disable GDB's overlay support.  When overlay support is disabled,
     GDB assumes that all functions and variables are always present at
     their mapped addresses.  By default, GDB's overlay support is
     disabled.

`overlay manual'
     Enable "manual" overlay debugging.  In this mode, GDB relies on
     you to tell it which overlays are mapped, and which are not, using
     the `overlay map-overlay' and `overlay unmap-overlay' commands
     described below.

`overlay map-overlay OVERLAY'
`overlay map OVERLAY'
     Tell GDB that OVERLAY is now mapped; OVERLAY must be the name of
     the object file section containing the overlay.  When an overlay
     is mapped, GDB assumes it can find the overlay's functions and
     variables at their mapped addresses.  GDB assumes that any other
     overlays whose mapped ranges overlap that of OVERLAY are now
     unmapped.

`overlay unmap-overlay OVERLAY'
`overlay unmap OVERLAY'
     Tell GDB that OVERLAY is no longer mapped; OVERLAY must be the
     name of the object file section containing the overlay.  When an
     overlay is unmapped, GDB assumes it can find the overlay's
     functions and variables at their load addresses.

`overlay auto'
     Enable "automatic" overlay debugging.  In this mode, GDB consults
     a data structure the overlay manager maintains in the inferior to
     see which overlays are mapped.  For details, see *Note Automatic
     Overlay Debugging::.

`overlay load-target'
`overlay load'
     Re-read the overlay table from the inferior.  Normally, GDB
     re-reads the table GDB automatically each time the inferior stops,
     so this command should only be necessary if you have changed the
     overlay mapping yourself using GDB.  This command is only useful
     when using automatic overlay debugging.

`overlay list-overlays'
`overlay list'
     Display a list of the overlays currently mapped, along with their
     mapped addresses, load addresses, and sizes.


   Normally, when GDB prints a code address, it includes the name of
the function the address falls in:

     (gdb) print main
     $3 = {int ()} 0x11a0 <main>
   When overlay debugging is enabled, GDB recognizes code in unmapped
overlays, and prints the names of unmapped functions with asterisks
around them.  For example, if `foo' is a function in an unmapped
overlay, GDB prints it this way:

     (gdb) overlay list
     No sections are mapped.
     (gdb) print foo
     $5 = {int (int)} 0x100000 <*foo*>
   When `foo''s overlay is mapped, GDB prints the function's name
normally:

     (gdb) overlay list
     Section .ov.foo.text, loaded at 0x100000 - 0x100034,
             mapped at 0x1016 - 0x104a
     (gdb) print foo
     $6 = {int (int)} 0x1016 <foo>

   When overlay debugging is enabled, GDB can find the correct address
for functions and variables in an overlay, whether or not the overlay
is mapped.  This allows most GDB commands, like `break' and
`disassemble', to work normally, even on unmapped code.  However, GDB's
breakpoint support has some limitations:

   * You can set breakpoints in functions in unmapped overlays, as long
     as GDB can write to the overlay at its load address.

   * GDB can not set hardware or simulator-based breakpoints in
     unmapped overlays.  However, if you set a breakpoint at the end of
     your overlay manager (and tell GDB which overlays are now mapped,
     if you are using manual overlay management), GDB will re-set its
     breakpoints properly.


File: gdb.info,  Node: Automatic Overlay Debugging,  Next: Overlay Sample Program,  Prev: Overlay Commands,  Up: Overlays

14.3 Automatic Overlay Debugging
================================

GDB can automatically track which overlays are mapped and which are
not, given some simple co-operation from the overlay manager in the
inferior.  If you enable automatic overlay debugging with the `overlay
auto' command (*note Overlay Commands::), GDB looks in the inferior's
memory for certain variables describing the current state of the
overlays.

   Here are the variables your overlay manager must define to support
GDB's automatic overlay debugging:

`_ovly_table':
     This variable must be an array of the following structures:

          struct
          {
            /* The overlay's mapped address.  */
            unsigned long vma;

            /* The size of the overlay, in bytes.  */
            unsigned long size;

            /* The overlay's load address.  */
            unsigned long lma;

            /* Non-zero if the overlay is currently mapped;
               zero otherwise.  */
            unsigned long mapped;
          }

`_novlys':
     This variable must be a four-byte signed integer, holding the total
     number of elements in `_ovly_table'.


   To decide whether a particular overlay is mapped or not, GDB looks
for an entry in `_ovly_table' whose `vma' and `lma' members equal the
VMA and LMA of the overlay's section in the executable file.  When GDB
finds a matching entry, it consults the entry's `mapped' member to
determine whether the overlay is currently mapped.

   In addition, your overlay manager may define a function called
`_ovly_debug_event'.  If this function is defined, GDB will silently
set a breakpoint there.  If the overlay manager then calls this
function whenever it has changed the overlay table, this will enable
GDB to accurately keep track of which overlays are in program memory,
and update any breakpoints that may be set in overlays.  This will
allow breakpoints to work even if the overlays are kept in ROM or other
non-writable memory while they are not being executed.


File: gdb.info,  Node: Overlay Sample Program,  Prev: Automatic Overlay Debugging,  Up: Overlays

14.4 Overlay Sample Program
===========================

When linking a program which uses overlays, you must place the overlays
at their load addresses, while relocating them to run at their mapped
addresses.  To do this, you must write a linker script (*note Overlay
Description: (ld.info)Overlay Description.).  Unfortunately, since
linker scripts are specific to a particular host system, target
architecture, and target memory layout, this manual cannot provide
portable sample code demonstrating GDB's overlay support.

   However, the GDB source distribution does contain an overlaid
program, with linker scripts for a few systems, as part of its test
suite.  The program consists of the following files from
`gdb/testsuite/gdb.base':

`overlays.c'
     The main program file.

`ovlymgr.c'
     A simple overlay manager, used by `overlays.c'.

`foo.c'
`bar.c'
`baz.c'
`grbx.c'
     Overlay modules, loaded and used by `overlays.c'.

`d10v.ld'
`m32r.ld'
     Linker scripts for linking the test program on the `d10v-elf' and
     `m32r-elf' targets.

   You can build the test program using the `d10v-elf' GCC
cross-compiler like this:

     $ d10v-elf-gcc -g -c overlays.c
     $ d10v-elf-gcc -g -c ovlymgr.c
     $ d10v-elf-gcc -g -c foo.c
     $ d10v-elf-gcc -g -c bar.c
     $ d10v-elf-gcc -g -c baz.c
     $ d10v-elf-gcc -g -c grbx.c
     $ d10v-elf-gcc -g overlays.o ovlymgr.o foo.o bar.o \
                       baz.o grbx.o -Wl,-Td10v.ld -o overlays

   The build process is identical for any other architecture, except
that you must substitute the appropriate compiler and linker script for
the target system for `d10v-elf-gcc' and `d10v.ld'.


File: gdb.info,  Node: Languages,  Next: Symbols,  Prev: Overlays,  Up: Top

15 Using GDB with Different Languages
*************************************

Although programming languages generally have common aspects, they are
rarely expressed in the same manner.  For instance, in ANSI C,
dereferencing a pointer `p' is accomplished by `*p', but in Modula-2,
it is accomplished by `p^'.  Values can also be represented (and
displayed) differently.  Hex numbers in C appear as `0x1ae', while in
Modula-2 they appear as `1AEH'.

   Language-specific information is built into GDB for some languages,
allowing you to express operations like the above in your program's
native language, and allowing GDB to output values in a manner
consistent with the syntax of your program's native language.  The
language you use to build expressions is called the "working language".

* Menu:

* Setting::                     Switching between source languages
* Show::                        Displaying the language
* Checks::                      Type and range checks
* Supported Languages::         Supported languages
* Unsupported Languages::       Unsupported languages


File: gdb.info,  Node: Setting,  Next: Show,  Up: Languages

15.1 Switching Between Source Languages
=======================================

There are two ways to control the working language--either have GDB set
it automatically, or select it manually yourself.  You can use the `set
language' command for either purpose.  On startup, GDB defaults to
setting the language automatically.  The working language is used to
determine how expressions you type are interpreted, how values are
printed, etc.

   In addition to the working language, every source file that GDB
knows about has its own working language.  For some object file
formats, the compiler might indicate which language a particular source
file is in.  However, most of the time GDB infers the language from the
name of the file.  The language of a source file controls whether C++
names are demangled--this way `backtrace' can show each frame
appropriately for its own language.  There is no way to set the
language of a source file from within GDB, but you can set the language
associated with a filename extension.  *Note Displaying the Language:
Show.

   This is most commonly a problem when you use a program, such as
`cfront' or `f2c', that generates C but is written in another language.
In that case, make the program use `#line' directives in its C output;
that way GDB will know the correct language of the source code of the
original program, and will display that source code, not the generated
C code.

* Menu:

* Filenames::                   Filename extensions and languages.
* Manually::                    Setting the working language manually
* Automatically::               Having GDB infer the source language


File: gdb.info,  Node: Filenames,  Next: Manually,  Up: Setting

15.1.1 List of Filename Extensions and Languages
------------------------------------------------

If a source file name ends in one of the following extensions, then GDB
infers that its language is the one indicated.

`.ada'
`.ads'
`.adb'
`.a'
     Ada source file.

`.c'
     C source file

`.C'
`.cc'
`.cp'
`.cpp'
`.cxx'
`.c++'
     C++ source file

`.d'
     D source file

`.m'
     Objective-C source file

`.f'
`.F'
     Fortran source file

`.mod'
     Modula-2 source file

`.s'
`.S'
     Assembler source file.  This actually behaves almost like C, but
     GDB does not skip over function prologues when stepping.

   In addition, you may set the language associated with a filename
extension.  *Note Displaying the Language: Show.


File: gdb.info,  Node: Manually,  Next: Automatically,  Prev: Filenames,  Up: Setting

15.1.2 Setting the Working Language
-----------------------------------

If you allow GDB to set the language automatically, expressions are
interpreted the same way in your debugging session and your program.

   If you wish, you may set the language manually.  To do this, issue
the command `set language LANG', where LANG is the name of a language,
such as `c' or `modula-2'.  For a list of the supported languages, type
`set language'.

   Setting the language manually prevents GDB from updating the working
language automatically.  This can lead to confusion if you try to debug
a program when the working language is not the same as the source
language, when an expression is acceptable to both languages--but means
different things.  For instance, if the current source file were
written in C, and GDB was parsing Modula-2, a command such as:

     print a = b + c

might not have the effect you intended.  In C, this means to add `b'
and `c' and place the result in `a'.  The result printed would be the
value of `a'.  In Modula-2, this means to compare `a' to the result of
`b+c', yielding a `BOOLEAN' value.


File: gdb.info,  Node: Automatically,  Prev: Manually,  Up: Setting

15.1.3 Having GDB Infer the Source Language
-------------------------------------------

To have GDB set the working language automatically, use `set language
local' or `set language auto'.  GDB then infers the working language.
That is, when your program stops in a frame (usually by encountering a
breakpoint), GDB sets the working language to the language recorded for
the function in that frame.  If the language for a frame is unknown
(that is, if the function or block corresponding to the frame was
defined in a source file that does not have a recognized extension),
the current working language is not changed, and GDB issues a warning.

   This may not seem necessary for most programs, which are written
entirely in one source language.  However, program modules and libraries
written in one source language can be used by a main program written in
a different source language.  Using `set language auto' in this case
frees you from having to set the working language manually.


File: gdb.info,  Node: Show,  Next: Checks,  Prev: Setting,  Up: Languages

15.2 Displaying the Language
============================

The following commands help you find out which language is the working
language, and also what language source files were written in.

`show language'
     Display the current working language.  This is the language you
     can use with commands such as `print' to build and compute
     expressions that may involve variables in your program.

`info frame'
     Display the source language for this frame.  This language becomes
     the working language if you use an identifier from this frame.
     *Note Information about a Frame: Frame Info, to identify the other
     information listed here.

`info source'
     Display the source language of this source file.  *Note Examining
     the Symbol Table: Symbols, to identify the other information
     listed here.

   In unusual circumstances, you may have source files with extensions
not in the standard list.  You can then set the extension associated
with a language explicitly:

`set extension-language EXT LANGUAGE'
     Tell GDB that source files with extension EXT are to be assumed as
     written in the source language LANGUAGE.

`info extensions'
     List all the filename extensions and the associated languages.


File: gdb.info,  Node: Checks,  Next: Supported Languages,  Prev: Show,  Up: Languages

15.3 Type and Range Checking
============================

     _Warning:_ In this release, the GDB commands for type and range
     checking are included, but they do not yet have any effect.  This
     section documents the intended facilities.

   Some languages are designed to guard you against making seemingly
common errors through a series of compile- and run-time checks.  These
include checking the type of arguments to functions and operators, and
making sure mathematical overflows are caught at run time.  Checks such
as these help to ensure a program's correctness once it has been
compiled by eliminating type mismatches, and providing active checks
for range errors when your program is running.

   GDB can check for conditions like the above if you wish.  Although
GDB does not check the statements in your program, it can check
expressions entered directly into GDB for evaluation via the `print'
command, for example.  As with the working language, GDB can also
decide whether or not to check automatically based on your program's
source language.  *Note Supported Languages: Supported Languages, for
the default settings of supported languages.

* Menu:

* Type Checking::               An overview of type checking
* Range Checking::              An overview of range checking


File: gdb.info,  Node: Type Checking,  Next: Range Checking,  Up: Checks

15.3.1 An Overview of Type Checking
-----------------------------------

Some languages, such as Modula-2, are strongly typed, meaning that the
arguments to operators and functions have to be of the correct type,
otherwise an error occurs.  These checks prevent type mismatch errors
from ever causing any run-time problems.  For example,

     1 + 2 => 3
but
     error--> 1 + 2.3

   The second example fails because the `CARDINAL' 1 is not
type-compatible with the `REAL' 2.3.

   For the expressions you use in GDB commands, you can tell the GDB
type checker to skip checking; to treat any mismatches as errors and
abandon the expression; or to only issue warnings when type mismatches
occur, but evaluate the expression anyway.  When you choose the last of
these, GDB evaluates expressions like the second example above, but
also issues a warning.

   Even if you turn type checking off, there may be other reasons
related to type that prevent GDB from evaluating an expression.  For
instance, GDB does not know how to add an `int' and a `struct foo'.
These particular type errors have nothing to do with the language in
use, and usually arise from expressions, such as the one described
above, which make little sense to evaluate anyway.

   Each language defines to what degree it is strict about type.  For
instance, both Modula-2 and C require the arguments to arithmetical
operators to be numbers.  In C, enumerated types and pointers can be
represented as numbers, so that they are valid arguments to mathematical
operators.  *Note Supported Languages: Supported Languages, for further
details on specific languages.

   GDB provides some additional commands for controlling the type
checker:

`set check type auto'
     Set type checking on or off based on the current working language.
     *Note Supported Languages: Supported Languages, for the default
     settings for each language.

`set check type on'
`set check type off'
     Set type checking on or off, overriding the default setting for the
     current working language.  Issue a warning if the setting does not
     match the language default.  If any type mismatches occur in
     evaluating an expression while type checking is on, GDB prints a
     message and aborts evaluation of the expression.

`set check type warn'
     Cause the type checker to issue warnings, but to always attempt to
     evaluate the expression.  Evaluating the expression may still be
     impossible for other reasons.  For example, GDB cannot add numbers
     and structures.

`show type'
     Show the current setting of the type checker, and whether or not
     GDB is setting it automatically.


File: gdb.info,  Node: Range Checking,  Prev: Type Checking,  Up: Checks

15.3.2 An Overview of Range Checking
------------------------------------

In some languages (such as Modula-2), it is an error to exceed the
bounds of a type; this is enforced with run-time checks.  Such range
checking is meant to ensure program correctness by making sure
computations do not overflow, or indices on an array element access do
not exceed the bounds of the array.

   For expressions you use in GDB commands, you can tell GDB to treat
range errors in one of three ways: ignore them, always treat them as
errors and abandon the expression, or issue warnings but evaluate the
expression anyway.

   A range error can result from numerical overflow, from exceeding an
array index bound, or when you type a constant that is not a member of
any type.  Some languages, however, do not treat overflows as an error.
In many implementations of C, mathematical overflow causes the result
to "wrap around" to lower values--for example, if M is the largest
integer value, and S is the smallest, then

     M + 1 => S

   This, too, is specific to individual languages, and in some cases
specific to individual compilers or machines.  *Note Supported
Languages: Supported Languages, for further details on specific
languages.

   GDB provides some additional commands for controlling the range
checker:

`set check range auto'
     Set range checking on or off based on the current working language.
     *Note Supported Languages: Supported Languages, for the default
     settings for each language.

`set check range on'
`set check range off'
     Set range checking on or off, overriding the default setting for
     the current working language.  A warning is issued if the setting
     does not match the language default.  If a range error occurs and
     range checking is on, then a message is printed and evaluation of
     the expression is aborted.

`set check range warn'
     Output messages when the GDB range checker detects a range error,
     but attempt to evaluate the expression anyway.  Evaluating the
     expression may still be impossible for other reasons, such as
     accessing memory that the process does not own (a typical example
     from many Unix systems).

`show range'
     Show the current setting of the range checker, and whether or not
     it is being set automatically by GDB.


File: gdb.info,  Node: Supported Languages,  Next: Unsupported Languages,  Prev: Checks,  Up: Languages

15.4 Supported Languages
========================

GDB supports C, C++, D, Go, Objective-C, Fortran, Java, OpenCL C,
Pascal, assembly, Modula-2, and Ada.  Some GDB features may be used in
expressions regardless of the language you use: the GDB `@' and `::'
operators, and the `{type}addr' construct (*note Expressions:
Expressions.) can be used with the constructs of any supported language.

   The following sections detail to what degree each source language is
supported by GDB.  These sections are not meant to be language
tutorials or references, but serve only as a reference guide to what the
GDB expression parser accepts, and what input and output formats should
look like for different languages.  There are many good books written
on each of these languages; please look to these for a language
reference or tutorial.

* Menu:

* C::                           C and C++
* D::                           D
* Go::                          Go
* Objective-C::                 Objective-C
* OpenCL C::                    OpenCL C
* Fortran::                     Fortran
* Pascal::                      Pascal
* Modula-2::                    Modula-2
* Ada::                         Ada


File: gdb.info,  Node: C,  Next: D,  Up: Supported Languages

15.4.1 C and C++
----------------

Since C and C++ are so closely related, many features of GDB apply to
both languages.  Whenever this is the case, we discuss those languages
together.

   The C++ debugging facilities are jointly implemented by the C++
compiler and GDB.  Therefore, to debug your C++ code effectively, you
must compile your C++ programs with a supported C++ compiler, such as
GNU `g++', or the HP ANSI C++ compiler (`aCC').

* Menu:

* C Operators::                 C and C++ operators
* C Constants::                 C and C++ constants
* C Plus Plus Expressions::     C++ expressions
* C Defaults::                  Default settings for C and C++
* C Checks::                    C and C++ type and range checks
* Debugging C::                 GDB and C
* Debugging C Plus Plus::       GDB features for C++
* Decimal Floating Point::      Numbers in Decimal Floating Point format


File: gdb.info,  Node: C Operators,  Next: C Constants,  Up: C

15.4.1.1 C and C++ Operators
............................

Operators must be defined on values of specific types.  For instance,
`+' is defined on numbers, but not on structures.  Operators are often
defined on groups of types.

   For the purposes of C and C++, the following definitions hold:

   * _Integral types_ include `int' with any of its storage-class
     specifiers; `char'; `enum'; and, for C++, `bool'.

   * _Floating-point types_ include `float', `double', and `long
     double' (if supported by the target platform).

   * _Pointer types_ include all types defined as `(TYPE *)'.

   * _Scalar types_ include all of the above.


The following operators are supported.  They are listed here in order
of increasing precedence:

`,'
     The comma or sequencing operator.  Expressions in a
     comma-separated list are evaluated from left to right, with the
     result of the entire expression being the last expression
     evaluated.

`='
     Assignment.  The value of an assignment expression is the value
     assigned.  Defined on scalar types.

`OP='
     Used in an expression of the form `A OP= B', and translated to
     `A = A OP B'.  `OP=' and `=' have the same precedence.  OP is any
     one of the operators `|', `^', `&', `<<', `>>', `+', `-', `*',
     `/', `%'.

`?:'
     The ternary operator.  `A ? B : C' can be thought of as:  if A
     then B else C.  A should be of an integral type.

`||'
     Logical OR.  Defined on integral types.

`&&'
     Logical AND.  Defined on integral types.

`|'
     Bitwise OR.  Defined on integral types.

`^'
     Bitwise exclusive-OR.  Defined on integral types.

`&'
     Bitwise AND.  Defined on integral types.

`==, !='
     Equality and inequality.  Defined on scalar types.  The value of
     these expressions is 0 for false and non-zero for true.

`<, >, <=, >='
     Less than, greater than, less than or equal, greater than or equal.
     Defined on scalar types.  The value of these expressions is 0 for
     false and non-zero for true.

`<<, >>'
     left shift, and right shift.  Defined on integral types.

`@'
     The GDB "artificial array" operator (*note Expressions:
     Expressions.).

`+, -'
     Addition and subtraction.  Defined on integral types,
     floating-point types and pointer types.

`*, /, %'
     Multiplication, division, and modulus.  Multiplication and
     division are defined on integral and floating-point types.
     Modulus is defined on integral types.

`++, --'
     Increment and decrement.  When appearing before a variable, the
     operation is performed before the variable is used in an
     expression; when appearing after it, the variable's value is used
     before the operation takes place.

`*'
     Pointer dereferencing.  Defined on pointer types.  Same precedence
     as `++'.

`&'
     Address operator.  Defined on variables.  Same precedence as `++'.

     For debugging C++, GDB implements a use of `&' beyond what is
     allowed in the C++ language itself: you can use `&(&REF)' to
     examine the address where a C++ reference variable (declared with
     `&REF') is stored.

`-'
     Negative.  Defined on integral and floating-point types.  Same
     precedence as `++'.

`!'
     Logical negation.  Defined on integral types.  Same precedence as
     `++'.

`~'
     Bitwise complement operator.  Defined on integral types.  Same
     precedence as `++'.

`., ->'
     Structure member, and pointer-to-structure member.  For
     convenience, GDB regards the two as equivalent, choosing whether
     to dereference a pointer based on the stored type information.
     Defined on `struct' and `union' data.

`.*, ->*'
     Dereferences of pointers to members.

`[]'
     Array indexing.  `A[I]' is defined as `*(A+I)'.  Same precedence
     as `->'.

`()'
     Function parameter list.  Same precedence as `->'.

`::'
     C++ scope resolution operator.  Defined on `struct', `union', and
     `class' types.

`::'
     Doubled colons also represent the GDB scope operator (*note
     Expressions: Expressions.).  Same precedence as `::', above.

   If an operator is redefined in the user code, GDB usually attempts
to invoke the redefined version instead of using the operator's
predefined meaning.


File: gdb.info,  Node: C Constants,  Next: C Plus Plus Expressions,  Prev: C Operators,  Up: C

15.4.1.2 C and C++ Constants
............................

GDB allows you to express the constants of C and C++ in the following
ways:

   * Integer constants are a sequence of digits.  Octal constants are
     specified by a leading `0' (i.e. zero), and hexadecimal constants
     by a leading `0x' or `0X'.  Constants may also end with a letter
     `l', specifying that the constant should be treated as a `long'
     value.

   * Floating point constants are a sequence of digits, followed by a
     decimal point, followed by a sequence of digits, and optionally
     followed by an exponent.  An exponent is of the form:
     `e[[+]|-]NNN', where NNN is another sequence of digits.  The `+'
     is optional for positive exponents.  A floating-point constant may
     also end with a letter `f' or `F', specifying that the constant
     should be treated as being of the `float' (as opposed to the
     default `double') type; or with a letter `l' or `L', which
     specifies a `long double' constant.

   * Enumerated constants consist of enumerated identifiers, or their
     integral equivalents.

   * Character constants are a single character surrounded by single
     quotes (`''), or a number--the ordinal value of the corresponding
     character (usually its ASCII value).  Within quotes, the single
     character may be represented by a letter or by "escape sequences",
     which are of the form `\NNN', where NNN is the octal representation
     of the character's ordinal value; or of the form `\X', where `X'
     is a predefined special character--for example, `\n' for newline.

     Wide character constants can be written by prefixing a character
     constant with `L', as in C.  For example, `L'x'' is the wide form
     of `x'.  The target wide character set is used when computing the
     value of this constant (*note Character Sets::).

   * String constants are a sequence of character constants surrounded
     by double quotes (`"').  Any valid character constant (as described
     above) may appear.  Double quotes within the string must be
     preceded by a backslash, so for instance `"a\"b'c"' is a string of
     five characters.

     Wide string constants can be written by prefixing a string constant
     with `L', as in C.  The target wide character set is used when
     computing the value of this constant (*note Character Sets::).

   * Pointer constants are an integral value.  You can also write
     pointers to constants using the C operator `&'.

   * Array constants are comma-separated lists surrounded by braces `{'
     and `}'; for example, `{1,2,3}' is a three-element array of
     integers, `{{1,2}, {3,4}, {5,6}}' is a three-by-two array, and
     `{&"hi", &"there", &"fred"}' is a three-element array of pointers.


File: gdb.info,  Node: C Plus Plus Expressions,  Next: C Defaults,  Prev: C Constants,  Up: C

15.4.1.3 C++ Expressions
........................

GDB expression handling can interpret most C++ expressions.

     _Warning:_ GDB can only debug C++ code if you use the proper
     compiler and the proper debug format.  Currently, GDB works best
     when debugging C++ code that is compiled with the most recent
     version of GCC possible.  The DWARF debugging format is preferred;
     GCC defaults to this on most popular platforms.  Other compilers
     and/or debug formats are likely to work badly or not at all when
     using GDB to debug C++ code.  *Note Compilation::.

  1. Member function calls are allowed; you can use expressions like

          count = aml->GetOriginal(x, y)

  2. While a member function is active (in the selected stack frame),
     your expressions have the same namespace available as the member
     function; that is, GDB allows implicit references to the class
     instance pointer `this' following the same rules as C++.  `using'
     declarations in the current scope are also respected by GDB.

  3. You can call overloaded functions; GDB resolves the function call
     to the right definition, with some restrictions.  GDB does not
     perform overload resolution involving user-defined type
     conversions, calls to constructors, or instantiations of templates
     that do not exist in the program.  It also cannot handle ellipsis
     argument lists or default arguments.

     It does perform integral conversions and promotions, floating-point
     promotions, arithmetic conversions, pointer conversions,
     conversions of class objects to base classes, and standard
     conversions such as those of functions or arrays to pointers; it
     requires an exact match on the number of function arguments.

     Overload resolution is always performed, unless you have specified
     `set overload-resolution off'.  *Note GDB Features for C++:
     Debugging C Plus Plus.

     You must specify `set overload-resolution off' in order to use an
     explicit function signature to call an overloaded function, as in
          p 'foo(char,int)'('x', 13)

     The GDB command-completion facility can simplify this; see *Note
     Command Completion: Completion.

  4. GDB understands variables declared as C++ references; you can use
     them in expressions just as you do in C++ source--they are
     automatically dereferenced.

     In the parameter list shown when GDB displays a frame, the values
     of reference variables are not displayed (unlike other variables);
     this avoids clutter, since references are often used for large
     structures.  The _address_ of a reference variable is always
     shown, unless you have specified `set print address off'.

  5. GDB supports the C++ name resolution operator `::'--your
     expressions can use it just as expressions in your program do.
     Since one scope may be defined in another, you can use `::'
     repeatedly if necessary, for example in an expression like
     `SCOPE1::SCOPE2::NAME'.  GDB also allows resolving name scope by
     reference to source files, in both C and C++ debugging (*note
     Program Variables: Variables.).

  6. GDB performs argument-dependent lookup, following the C++
     specification.


File: gdb.info,  Node: C Defaults,  Next: C Checks,  Prev: C Plus Plus Expressions,  Up: C

15.4.1.4 C and C++ Defaults
...........................

If you allow GDB to set type and range checking automatically, they
both default to `off' whenever the working language changes to C or
C++.  This happens regardless of whether you or GDB selects the working
language.

   If you allow GDB to set the language automatically, it recognizes
source files whose names end with `.c', `.C', or `.cc', etc, and when
GDB enters code compiled from one of these files, it sets the working
language to C or C++.  *Note Having GDB Infer the Source Language:
Automatically, for further details.


File: gdb.info,  Node: C Checks,  Next: Debugging C,  Prev: C Defaults,  Up: C

15.4.1.5 C and C++ Type and Range Checks
........................................

By default, when GDB parses C or C++ expressions, type checking is not
used.  However, if you turn type checking on, GDB considers two
variables type equivalent if:

   * The two variables are structured and have the same structure,
     union, or enumerated tag.

   * The two variables have the same type name, or types that have been
     declared equivalent through `typedef'.


   Range checking, if turned on, is done on mathematical operations.
Array indices are not checked, since they are often used to index a
pointer that is not itself an array.


File: gdb.info,  Node: Debugging C,  Next: Debugging C Plus Plus,  Prev: C Checks,  Up: C

15.4.1.6 GDB and C
..................

The `set print union' and `show print union' commands apply to the
`union' type.  When set to `on', any `union' that is inside a `struct'
or `class' is also printed.  Otherwise, it appears as `{...}'.

   The `@' operator aids in the debugging of dynamic arrays, formed
with pointers and a memory allocation function.  *Note Expressions:
Expressions.


File: gdb.info,  Node: Debugging C Plus Plus,  Next: Decimal Floating Point,  Prev: Debugging C,  Up: C

15.4.1.7 GDB Features for C++
.............................

Some GDB commands are particularly useful with C++, and some are
designed specifically for use with C++.  Here is a summary:

`breakpoint menus'
     When you want a breakpoint in a function whose name is overloaded,
     GDB has the capability to display a menu of possible breakpoint
     locations to help you specify which function definition you want.
     *Note Ambiguous Expressions: Ambiguous Expressions.

`rbreak REGEX'
     Setting breakpoints using regular expressions is helpful for
     setting breakpoints on overloaded functions that are not members
     of any special classes.  *Note Setting Breakpoints: Set Breaks.

`catch throw'
`catch catch'
     Debug C++ exception handling using these commands.  *Note Setting
     Catchpoints: Set Catchpoints.

`ptype TYPENAME'
     Print inheritance relationships as well as other information for
     type TYPENAME.  *Note Examining the Symbol Table: Symbols.

`info vtbl EXPRESSION.'
     The `info vtbl' command can be used to display the virtual method
     tables of the object computed by EXPRESSION.  This shows one entry
     per virtual table; there may be multiple virtual tables when
     multiple inheritance is in use.

`set print demangle'
`show print demangle'
`set print asm-demangle'
`show print asm-demangle'
     Control whether C++ symbols display in their source form, both when
     displaying code as C++ source and when displaying disassemblies.
     *Note Print Settings: Print Settings.

`set print object'
`show print object'
     Choose whether to print derived (actual) or declared types of
     objects.  *Note Print Settings: Print Settings.

`set print vtbl'
`show print vtbl'
     Control the format for printing virtual function tables.  *Note
     Print Settings: Print Settings.  (The `vtbl' commands do not work
     on programs compiled with the HP ANSI C++ compiler (`aCC').)

`set overload-resolution on'
     Enable overload resolution for C++ expression evaluation.  The
     default is on.  For overloaded functions, GDB evaluates the
     arguments and searches for a function whose signature matches the
     argument types, using the standard C++ conversion rules (see *Note
     C++ Expressions: C Plus Plus Expressions, for details).  If it
     cannot find a match, it emits a message.

`set overload-resolution off'
     Disable overload resolution for C++ expression evaluation.  For
     overloaded functions that are not class member functions, GDB
     chooses the first function of the specified name that it finds in
     the symbol table, whether or not its arguments are of the correct
     type.  For overloaded functions that are class member functions,
     GDB searches for a function whose signature _exactly_ matches the
     argument types.

`show overload-resolution'
     Show the current setting of overload resolution.

`Overloaded symbol names'
     You can specify a particular definition of an overloaded symbol,
     using the same notation that is used to declare such symbols in
     C++: type `SYMBOL(TYPES)' rather than just SYMBOL.  You can also
     use the GDB command-line word completion facilities to list the
     available choices, or to finish the type list for you.  *Note
     Command Completion: Completion, for details on how to do this.


File: gdb.info,  Node: Decimal Floating Point,  Prev: Debugging C Plus Plus,  Up: C

15.4.1.8 Decimal Floating Point format
......................................

GDB can examine, set and perform computations with numbers in decimal
floating point format, which in the C language correspond to the
`_Decimal32', `_Decimal64' and `_Decimal128' types as specified by the
extension to support decimal floating-point arithmetic.

   There are two encodings in use, depending on the architecture: BID
(Binary Integer Decimal) for x86 and x86-64, and DPD (Densely Packed
Decimal) for PowerPC.  GDB will use the appropriate encoding for the
configured target.

   Because of a limitation in `libdecnumber', the library used by GDB
to manipulate decimal floating point numbers, it is not possible to
convert (using a cast, for example) integers wider than 32-bit to
decimal float.

   In addition, in order to imitate GDB's behaviour with binary floating
point computations, error checking in decimal float operations ignores
underflow, overflow and divide by zero exceptions.

   In the PowerPC architecture, GDB provides a set of pseudo-registers
to inspect `_Decimal128' values stored in floating point registers.
See *Note PowerPC: PowerPC. for more details.


File: gdb.info,  Node: D,  Next: Go,  Prev: C,  Up: Supported Languages

15.4.2 D
--------

GDB can be used to debug programs written in D and compiled with GDC,
LDC or DMD compilers. Currently GDB supports only one D specific
feature -- dynamic arrays.


File: gdb.info,  Node: Go,  Next: Objective-C,  Prev: D,  Up: Supported Languages

15.4.3 Go
---------

GDB can be used to debug programs written in Go and compiled with
`gccgo' or `6g' compilers.

   Here is a summary of the Go-specific features and restrictions:

`The current Go package'
     The name of the current package does not need to be specified when
     specifying global variables and functions.

     For example, given the program:

          package main
          var myglob = "Shall we?"
          func main () {
            // ...
          }

     When stopped inside `main' either of these work:

          (gdb) p myglob
          (gdb) p main.myglob

`Builtin Go types'
     The `string' type is recognized by GDB and is printed as a string.

`Builtin Go functions'
     The GDB expression parser recognizes the `unsafe.Sizeof' function
     and handles it internally.

`Restrictions on Go expressions'
     All Go operators are supported except `&^'.  The Go `_' "blank
     identifier" is not supported.  Automatic dereferencing of pointers
     is not supported.


File: gdb.info,  Node: Objective-C,  Next: OpenCL C,  Prev: Go,  Up: Supported Languages

15.4.4 Objective-C
------------------

This section provides information about some commands and command
options that are useful for debugging Objective-C code.  See also *Note
info classes: Symbols, and *Note info selectors: Symbols, for a few
more commands specific to Objective-C support.

* Menu:

* Method Names in Commands::
* The Print Command with Objective-C::


File: gdb.info,  Node: Method Names in Commands,  Next: The Print Command with Objective-C,  Up: Objective-C

15.4.4.1 Method Names in Commands
.................................

The following commands have been extended to accept Objective-C method
names as line specifications:

   * `clear'

   * `break'

   * `info line'

   * `jump'

   * `list'

   A fully qualified Objective-C method name is specified as

     -[CLASS METHODNAME]

   where the minus sign is used to indicate an instance method and a
plus sign (not shown) is used to indicate a class method.  The class
name CLASS and method name METHODNAME are enclosed in brackets, similar
to the way messages are specified in Objective-C source code.  For
example, to set a breakpoint at the `create' instance method of class
`Fruit' in the program currently being debugged, enter:

     break -[Fruit create]

   To list ten program lines around the `initialize' class method,
enter:

     list +[NSText initialize]

   In the current version of GDB, the plus or minus sign is required.
In future versions of GDB, the plus or minus sign will be optional, but
you can use it to narrow the search.  It is also possible to specify
just a method name:

     break create

   You must specify the complete method name, including any colons.  If
your program's source files contain more than one `create' method,
you'll be presented with a numbered list of classes that implement that
method.  Indicate your choice by number, or type `0' to exit if none
apply.

   As another example, to clear a breakpoint established at the
`makeKeyAndOrderFront:' method of the `NSWindow' class, enter:

     clear -[NSWindow makeKeyAndOrderFront:]


File: gdb.info,  Node: The Print Command with Objective-C,  Prev: Method Names in Commands,  Up: Objective-C

15.4.4.2 The Print Command With Objective-C
...........................................

The print command has also been extended to accept methods.  For
example:

     print -[OBJECT hash]

will tell GDB to send the `hash' message to OBJECT and print the
result.  Also, an additional command has been added, `print-object' or
`po' for short, which is meant to print the description of an object.
However, this command may only work with certain Objective-C libraries
that have a particular hook function, `_NSPrintForDebugger', defined.


File: gdb.info,  Node: OpenCL C,  Next: Fortran,  Prev: Objective-C,  Up: Supported Languages

15.4.5 OpenCL C
---------------

This section provides information about GDBs OpenCL C support.

* Menu:

* OpenCL C Datatypes::
* OpenCL C Expressions::
* OpenCL C Operators::


File: gdb.info,  Node: OpenCL C Datatypes,  Next: OpenCL C Expressions,  Up: OpenCL C

15.4.5.1 OpenCL C Datatypes
...........................

GDB supports the builtin scalar and vector datatypes specified by
OpenCL 1.1.  In addition the half- and double-precision floating point
data types of the `cl_khr_fp16' and `cl_khr_fp64' OpenCL extensions are
also known to GDB.


File: gdb.info,  Node: OpenCL C Expressions,  Next: OpenCL C Operators,  Prev: OpenCL C Datatypes,  Up: OpenCL C

15.4.5.2 OpenCL C Expressions
.............................

GDB supports accesses to vector components including the access as
lvalue where possible.  Since OpenCL C is based on C99 most C
expressions supported by GDB can be used as well.


File: gdb.info,  Node: OpenCL C Operators,  Prev: OpenCL C Expressions,  Up: OpenCL C

15.4.5.3 OpenCL C Operators
...........................

GDB supports the operators specified by OpenCL 1.1 for scalar and
vector data types.


File: gdb.info,  Node: Fortran,  Next: Pascal,  Prev: OpenCL C,  Up: Supported Languages

15.4.6 Fortran
--------------

GDB can be used to debug programs written in Fortran, but it currently
supports only the features of Fortran 77 language.

   Some Fortran compilers (GNU Fortran 77 and Fortran 95 compilers
among them) append an underscore to the names of variables and
functions.  When you debug programs compiled by those compilers, you
will need to refer to variables and functions with a trailing
underscore.

* Menu:

* Fortran Operators::           Fortran operators and expressions
* Fortran Defaults::            Default settings for Fortran
* Special Fortran Commands::    Special GDB commands for Fortran


File: gdb.info,  Node: Fortran Operators,  Next: Fortran Defaults,  Up: Fortran

15.4.6.1 Fortran Operators and Expressions
..........................................

Operators must be defined on values of specific types.  For instance,
`+' is defined on numbers, but not on characters or other non-
arithmetic types.  Operators are often defined on groups of types.

`**'
     The exponentiation operator.  It raises the first operand to the
     power of the second one.

`:'
     The range operator.  Normally used in the form of array(low:high)
     to represent a section of array.

`%'
     The access component operator.  Normally used to access elements
     in derived types.  Also suitable for unions.  As unions aren't
     part of regular Fortran, this can only happen when accessing a
     register that uses a gdbarch-defined union type.


File: gdb.info,  Node: Fortran Defaults,  Next: Special Fortran Commands,  Prev: Fortran Operators,  Up: Fortran

15.4.6.2 Fortran Defaults
.........................

Fortran symbols are usually case-insensitive, so GDB by default uses
case-insensitive matches for Fortran symbols.  You can change that with
the `set case-insensitive' command, see *Note Symbols::, for the
details.


File: gdb.info,  Node: Special Fortran Commands,  Prev: Fortran Defaults,  Up: Fortran

15.4.6.3 Special Fortran Commands
.................................

GDB has some commands to support Fortran-specific features, such as
displaying common blocks.

`info common [COMMON-NAME]'
     This command prints the values contained in the Fortran `COMMON'
     block whose name is COMMON-NAME.  With no argument, the names of
     all `COMMON' blocks visible at the current program location are
     printed.


File: gdb.info,  Node: Pascal,  Next: Modula-2,  Prev: Fortran,  Up: Supported Languages

15.4.7 Pascal
-------------

Debugging Pascal programs which use sets, subranges, file variables, or
nested functions does not currently work.  GDB does not support
entering expressions, printing values, or similar features using Pascal
syntax.

   The Pascal-specific command `set print pascal_static-members'
controls whether static members of Pascal objects are displayed.  *Note
pascal_static-members: Print Settings.


File: gdb.info,  Node: Modula-2,  Next: Ada,  Prev: Pascal,  Up: Supported Languages

15.4.8 Modula-2
---------------

The extensions made to GDB to support Modula-2 only support output from
the GNU Modula-2 compiler (which is currently being developed).  Other
Modula-2 compilers are not currently supported, and attempting to debug
executables produced by them is most likely to give an error as GDB
reads in the executable's symbol table.

* Menu:

* M2 Operators::                Built-in operators
* Built-In Func/Proc::          Built-in functions and procedures
* M2 Constants::                Modula-2 constants
* M2 Types::                    Modula-2 types
* M2 Defaults::                 Default settings for Modula-2
* Deviations::                  Deviations from standard Modula-2
* M2 Checks::                   Modula-2 type and range checks
* M2 Scope::                    The scope operators `::' and `.'
* GDB/M2::                      GDB and Modula-2


File: gdb.info,  Node: M2 Operators,  Next: Built-In Func/Proc,  Up: Modula-2

15.4.8.1 Operators
..................

Operators must be defined on values of specific types.  For instance,
`+' is defined on numbers, but not on structures.  Operators are often
defined on groups of types.  For the purposes of Modula-2, the
following definitions hold:

   * _Integral types_ consist of `INTEGER', `CARDINAL', and their
     subranges.

   * _Character types_ consist of `CHAR' and its subranges.

   * _Floating-point types_ consist of `REAL'.

   * _Pointer types_ consist of anything declared as `POINTER TO TYPE'.

   * _Scalar types_ consist of all of the above.

   * _Set types_ consist of `SET' and `BITSET' types.

   * _Boolean types_ consist of `BOOLEAN'.

The following operators are supported, and appear in order of
increasing precedence:

`,'
     Function argument or array index separator.

`:='
     Assignment.  The value of VAR `:=' VALUE is VALUE.

`<, >'
     Less than, greater than on integral, floating-point, or enumerated
     types.

`<=, >='
     Less than or equal to, greater than or equal to on integral,
     floating-point and enumerated types, or set inclusion on set
     types.  Same precedence as `<'.

`=, <>, #'
     Equality and two ways of expressing inequality, valid on scalar
     types.  Same precedence as `<'.  In GDB scripts, only `<>' is
     available for inequality, since `#' conflicts with the script
     comment character.

`IN'
     Set membership.  Defined on set types and the types of their
     members.  Same precedence as `<'.

`OR'
     Boolean disjunction.  Defined on boolean types.

`AND, &'
     Boolean conjunction.  Defined on boolean types.

`@'
     The GDB "artificial array" operator (*note Expressions:
     Expressions.).

`+, -'
     Addition and subtraction on integral and floating-point types, or
     union and difference on set types.

`*'
     Multiplication on integral and floating-point types, or set
     intersection on set types.

`/'
     Division on floating-point types, or symmetric set difference on
     set types.  Same precedence as `*'.

`DIV, MOD'
     Integer division and remainder.  Defined on integral types.  Same
     precedence as `*'.

`-'
     Negative.  Defined on `INTEGER' and `REAL' data.

`^'
     Pointer dereferencing.  Defined on pointer types.

`NOT'
     Boolean negation.  Defined on boolean types.  Same precedence as
     `^'.

`.'
     `RECORD' field selector.  Defined on `RECORD' data.  Same
     precedence as `^'.

`[]'
     Array indexing.  Defined on `ARRAY' data.  Same precedence as `^'.

`()'
     Procedure argument list.  Defined on `PROCEDURE' objects.  Same
     precedence as `^'.

`::, .'
     GDB and Modula-2 scope operators.

     _Warning:_ Set expressions and their operations are not yet
     supported, so GDB treats the use of the operator `IN', or the use
     of operators `+', `-', `*', `/', `=', , `<>', `#', `<=', and `>='
     on sets as an error.


File: gdb.info,  Node: Built-In Func/Proc,  Next: M2 Constants,  Prev: M2 Operators,  Up: Modula-2

15.4.8.2 Built-in Functions and Procedures
..........................................

Modula-2 also makes available several built-in procedures and functions.
In describing these, the following metavariables are used:

A
     represents an `ARRAY' variable.

C
     represents a `CHAR' constant or variable.

I
     represents a variable or constant of integral type.

M
     represents an identifier that belongs to a set.  Generally used in
     the same function with the metavariable S.  The type of S should
     be `SET OF MTYPE' (where MTYPE is the type of M).

N
     represents a variable or constant of integral or floating-point
     type.

R
     represents a variable or constant of floating-point type.

T
     represents a type.

V
     represents a variable.

X
     represents a variable or constant of one of many types.  See the
     explanation of the function for details.

   All Modula-2 built-in procedures also return a result, described
below.

`ABS(N)'
     Returns the absolute value of N.

`CAP(C)'
     If C is a lower case letter, it returns its upper case equivalent,
     otherwise it returns its argument.

`CHR(I)'
     Returns the character whose ordinal value is I.

`DEC(V)'
     Decrements the value in the variable V by one.  Returns the new
     value.

`DEC(V,I)'
     Decrements the value in the variable V by I.  Returns the new
     value.

`EXCL(M,S)'
     Removes the element M from the set S.  Returns the new set.

`FLOAT(I)'
     Returns the floating point equivalent of the integer I.

`HIGH(A)'
     Returns the index of the last member of A.

`INC(V)'
     Increments the value in the variable V by one.  Returns the new
     value.

`INC(V,I)'
     Increments the value in the variable V by I.  Returns the new
     value.

`INCL(M,S)'
     Adds the element M to the set S if it is not already there.
     Returns the new set.

`MAX(T)'
     Returns the maximum value of the type T.

`MIN(T)'
     Returns the minimum value of the type T.

`ODD(I)'
     Returns boolean TRUE if I is an odd number.

`ORD(X)'
     Returns the ordinal value of its argument.  For example, the
     ordinal value of a character is its ASCII value (on machines
     supporting the ASCII character set).  X must be of an ordered
     type, which include integral, character and enumerated types.

`SIZE(X)'
     Returns the size of its argument.  X can be a variable or a type.

`TRUNC(R)'
     Returns the integral part of R.

`TSIZE(X)'
     Returns the size of its argument.  X can be a variable or a type.

`VAL(T,I)'
     Returns the member of the type T whose ordinal value is I.

     _Warning:_  Sets and their operations are not yet supported, so
     GDB treats the use of procedures `INCL' and `EXCL' as an error.


File: gdb.info,  Node: M2 Constants,  Next: M2 Types,  Prev: Built-In Func/Proc,  Up: Modula-2

15.4.8.3 Constants
..................

GDB allows you to express the constants of Modula-2 in the following
ways:

   * Integer constants are simply a sequence of digits.  When used in an
     expression, a constant is interpreted to be type-compatible with
     the rest of the expression.  Hexadecimal integers are specified by
     a trailing `H', and octal integers by a trailing `B'.

   * Floating point constants appear as a sequence of digits, followed
     by a decimal point and another sequence of digits.  An optional
     exponent can then be specified, in the form `E[+|-]NNN', where
     `[+|-]NNN' is the desired exponent.  All of the digits of the
     floating point constant must be valid decimal (base 10) digits.

   * Character constants consist of a single character enclosed by a
     pair of like quotes, either single (`'') or double (`"').  They may
     also be expressed by their ordinal value (their ASCII value,
     usually) followed by a `C'.

   * String constants consist of a sequence of characters enclosed by a
     pair of like quotes, either single (`'') or double (`"').  Escape
     sequences in the style of C are also allowed.  *Note C and C++
     Constants: C Constants, for a brief explanation of escape
     sequences.

   * Enumerated constants consist of an enumerated identifier.

   * Boolean constants consist of the identifiers `TRUE' and `FALSE'.

   * Pointer constants consist of integral values only.

   * Set constants are not yet supported.


File: gdb.info,  Node: M2 Types,  Next: M2 Defaults,  Prev: M2 Constants,  Up: Modula-2

15.4.8.4 Modula-2 Types
.......................

Currently GDB can print the following data types in Modula-2 syntax:
array types, record types, set types, pointer types, procedure types,
enumerated types, subrange types and base types.  You can also print
the contents of variables declared using these type.  This section
gives a number of simple source code examples together with sample GDB
sessions.

   The first example contains the following section of code:

     VAR
        s: SET OF CHAR ;
        r: [20..40] ;

and you can request GDB to interrogate the type and value of `r' and
`s'.

     (gdb) print s
     {'A'..'C', 'Z'}
     (gdb) ptype s
     SET OF CHAR
     (gdb) print r
     21
     (gdb) ptype r
     [20..40]

Likewise if your source code declares `s' as:

     VAR
        s: SET ['A'..'Z'] ;

then you may query the type of `s' by:

     (gdb) ptype s
     type = SET ['A'..'Z']

Note that at present you cannot interactively manipulate set
expressions using the debugger.

   The following example shows how you might declare an array in
Modula-2 and how you can interact with GDB to print its type and
contents:

     VAR
        s: ARRAY [-10..10] OF CHAR ;

     (gdb) ptype s
     ARRAY [-10..10] OF CHAR

   Note that the array handling is not yet complete and although the
type is printed correctly, expression handling still assumes that all
arrays have a lower bound of zero and not `-10' as in the example above.

   Here are some more type related Modula-2 examples:

     TYPE
        colour = (blue, red, yellow, green) ;
        t = [blue..yellow] ;
     VAR
        s: t ;
     BEGIN
        s := blue ;

The GDB interaction shows how you can query the data type and value of
a variable.

     (gdb) print s
     $1 = blue
     (gdb) ptype t
     type = [blue..yellow]

In this example a Modula-2 array is declared and its contents
displayed.  Observe that the contents are written in the same way as
their `C' counterparts.

     VAR
        s: ARRAY [1..5] OF CARDINAL ;
     BEGIN
        s[1] := 1 ;

     (gdb) print s
     $1 = {1, 0, 0, 0, 0}
     (gdb) ptype s
     type = ARRAY [1..5] OF CARDINAL

   The Modula-2 language interface to GDB also understands pointer
types as shown in this example:

     VAR
        s: POINTER TO ARRAY [1..5] OF CARDINAL ;
     BEGIN
        NEW(s) ;
        s^[1] := 1 ;

and you can request that GDB describes the type of `s'.

     (gdb) ptype s
     type = POINTER TO ARRAY [1..5] OF CARDINAL

   GDB handles compound types as we can see in this example.  Here we
combine array types, record types, pointer types and subrange types:

     TYPE
        foo = RECORD
                 f1: CARDINAL ;
                 f2: CHAR ;
                 f3: myarray ;
              END ;

        myarray = ARRAY myrange OF CARDINAL ;
        myrange = [-2..2] ;
     VAR
        s: POINTER TO ARRAY myrange OF foo ;

and you can ask GDB to describe the type of `s' as shown below.

     (gdb) ptype s
     type = POINTER TO ARRAY [-2..2] OF foo = RECORD
         f1 : CARDINAL;
         f2 : CHAR;
         f3 : ARRAY [-2..2] OF CARDINAL;
     END


File: gdb.info,  Node: M2 Defaults,  Next: Deviations,  Prev: M2 Types,  Up: Modula-2

15.4.8.5 Modula-2 Defaults
..........................

If type and range checking are set automatically by GDB, they both
default to `on' whenever the working language changes to Modula-2.
This happens regardless of whether you or GDB selected the working
language.

   If you allow GDB to set the language automatically, then entering
code compiled from a file whose name ends with `.mod' sets the working
language to Modula-2.  *Note Having GDB Infer the Source Language:
Automatically, for further details.


File: gdb.info,  Node: Deviations,  Next: M2 Checks,  Prev: M2 Defaults,  Up: Modula-2

15.4.8.6 Deviations from Standard Modula-2
..........................................

A few changes have been made to make Modula-2 programs easier to debug.
This is done primarily via loosening its type strictness:

   * Unlike in standard Modula-2, pointer constants can be formed by
     integers.  This allows you to modify pointer variables during
     debugging.  (In standard Modula-2, the actual address contained in
     a pointer variable is hidden from you; it can only be modified
     through direct assignment to another pointer variable or
     expression that returned a pointer.)

   * C escape sequences can be used in strings and characters to
     represent non-printable characters.  GDB prints out strings with
     these escape sequences embedded.  Single non-printable characters
     are printed using the `CHR(NNN)' format.

   * The assignment operator (`:=') returns the value of its right-hand
     argument.

   * All built-in procedures both modify _and_ return their argument.


File: gdb.info,  Node: M2 Checks,  Next: M2 Scope,  Prev: Deviations,  Up: Modula-2

15.4.8.7 Modula-2 Type and Range Checks
.......................................

     _Warning:_ in this release, GDB does not yet perform type or range
     checking.

   GDB considers two Modula-2 variables type equivalent if:

   * They are of types that have been declared equivalent via a `TYPE
     T1 = T2' statement

   * They have been declared on the same line.  (Note:  This is true of
     the GNU Modula-2 compiler, but it may not be true of other
     compilers.)

   As long as type checking is enabled, any attempt to combine variables
whose types are not equivalent is an error.

   Range checking is done on all mathematical operations, assignment,
array index bounds, and all built-in functions and procedures.


File: gdb.info,  Node: M2 Scope,  Next: GDB/M2,  Prev: M2 Checks,  Up: Modula-2

15.4.8.8 The Scope Operators `::' and `.'
.........................................

There are a few subtle differences between the Modula-2 scope operator
(`.') and the GDB scope operator (`::').  The two have similar syntax:


     MODULE . ID
     SCOPE :: ID

where SCOPE is the name of a module or a procedure, MODULE the name of
a module, and ID is any declared identifier within your program, except
another module.

   Using the `::' operator makes GDB search the scope specified by
SCOPE for the identifier ID.  If it is not found in the specified
scope, then GDB searches all scopes enclosing the one specified by
SCOPE.

   Using the `.' operator makes GDB search the current scope for the
identifier specified by ID that was imported from the definition module
specified by MODULE.  With this operator, it is an error if the
identifier ID was not imported from definition module MODULE, or if ID
is not an identifier in MODULE.


File: gdb.info,  Node: GDB/M2,  Prev: M2 Scope,  Up: Modula-2

15.4.8.9 GDB and Modula-2
.........................

Some GDB commands have little use when debugging Modula-2 programs.
Five subcommands of `set print' and `show print' apply specifically to
C and C++: `vtbl', `demangle', `asm-demangle', `object', and `union'.
The first four apply to C++, and the last to the C `union' type, which
has no direct analogue in Modula-2.

   The `@' operator (*note Expressions: Expressions.), while available
with any language, is not useful with Modula-2.  Its intent is to aid
the debugging of "dynamic arrays", which cannot be created in Modula-2
as they can in C or C++.  However, because an address can be specified
by an integral constant, the construct `{TYPE}ADREXP' is still useful.

   In GDB scripts, the Modula-2 inequality operator `#' is interpreted
as the beginning of a comment.  Use `<>' instead.


File: gdb.info,  Node: Ada,  Prev: Modula-2,  Up: Supported Languages

15.4.9 Ada
----------

The extensions made to GDB for Ada only support output from the GNU Ada
(GNAT) compiler.  Other Ada compilers are not currently supported, and
attempting to debug executables produced by them is most likely to be
difficult.

* Menu:

* Ada Mode Intro::              General remarks on the Ada syntax
                                   and semantics supported by Ada mode
                                   in GDB.
* Omissions from Ada::          Restrictions on the Ada expression syntax.
* Additions to Ada::            Extensions of the Ada expression syntax.
* Stopping Before Main Program:: Debugging the program during elaboration.
* Ada Tasks::                   Listing and setting breakpoints in tasks.
* Ada Tasks and Core Files::    Tasking Support when Debugging Core Files
* Ravenscar Profile::           Tasking Support when using the Ravenscar
                                   Profile
* Ada Glitches::                Known peculiarities of Ada mode.


File: gdb.info,  Node: Ada Mode Intro,  Next: Omissions from Ada,  Up: Ada

15.4.9.1 Introduction
.....................

The Ada mode of GDB supports a fairly large subset of Ada expression
syntax, with some extensions.  The philosophy behind the design of this
subset is

   * That GDB should provide basic literals and access to operations for
     arithmetic, dereferencing, field selection, indexing, and
     subprogram calls, leaving more sophisticated computations to
     subprograms written into the program (which therefore may be
     called from GDB).

   * That type safety and strict adherence to Ada language restrictions
     are not particularly important to the GDB user.

   * That brevity is important to the GDB user.

   Thus, for brevity, the debugger acts as if all names declared in
user-written packages are directly visible, even if they are not visible
according to Ada rules, thus making it unnecessary to fully qualify most
names with their packages, regardless of context.  Where this causes
ambiguity, GDB asks the user's intent.

   The debugger will start in Ada mode if it detects an Ada main
program.  As for other languages, it will enter Ada mode when stopped
in a program that was translated from an Ada source file.

   While in Ada mode, you may use `-' for comments.  This is useful
mostly for documenting command files.  The standard GDB comment (`#')
still works at the beginning of a line in Ada mode, but not in the
middle (to allow based literals).

   The debugger supports limited overloading.  Given a subprogram call
in which the function symbol has multiple definitions, it will use the
number of actual parameters and some information about their types to
attempt to narrow the set of definitions.  It also makes very limited
use of context, preferring procedures to functions in the context of
the `call' command, and functions to procedures elsewhere.


File: gdb.info,  Node: Omissions from Ada,  Next: Additions to Ada,  Prev: Ada Mode Intro,  Up: Ada

15.4.9.2 Omissions from Ada
...........................

Here are the notable omissions from the subset:

   * Only a subset of the attributes are supported:

        - 'First, 'Last, and 'Length  on array objects (not on types
          and subtypes).

        - 'Min and 'Max.

        - 'Pos and 'Val.

        - 'Tag.

        - 'Range on array objects (not subtypes), but only as the right
          operand of the membership (`in') operator.

        - 'Access, 'Unchecked_Access, and 'Unrestricted_Access (a GNAT
          extension).

        - 'Address.

   * The names in `Characters.Latin_1' are not available and
     concatenation is not implemented.  Thus, escape characters in
     strings are not currently available.

   * Equality tests (`=' and `/=') on arrays test for bitwise equality
     of representations.  They will generally work correctly for
     strings and arrays whose elements have integer or enumeration
     types.  They may not work correctly for arrays whose element types
     have user-defined equality, for arrays of real values (in
     particular, IEEE-conformant floating point, because of negative
     zeroes and NaNs), and for arrays whose elements contain unused
     bits with indeterminate values.

   * The other component-by-component array operations (`and', `or',
     `xor', `not', and relational tests other than equality) are not
     implemented.

   * There is limited support for array and record aggregates.  They are
     permitted only on the right sides of assignments, as in these
     examples:

          (gdb) set An_Array := (1, 2, 3, 4, 5, 6)
          (gdb) set An_Array := (1, others => 0)
          (gdb) set An_Array := (0|4 => 1, 1..3 => 2, 5 => 6)
          (gdb) set A_2D_Array := ((1, 2, 3), (4, 5, 6), (7, 8, 9))
          (gdb) set A_Record := (1, "Peter", True);
          (gdb) set A_Record := (Name => "Peter", Id => 1, Alive => True)

     Changing a discriminant's value by assigning an aggregate has an
     undefined effect if that discriminant is used within the record.
     However, you can first modify discriminants by directly assigning
     to them (which normally would not be allowed in Ada), and then
     performing an aggregate assignment.  For example, given a variable
     `A_Rec' declared to have a type such as:

          type Rec (Len : Small_Integer := 0) is record
              Id : Integer;
              Vals : IntArray (1 .. Len);
          end record;

     you can assign a value with a different size of `Vals' with two
     assignments:

          (gdb) set A_Rec.Len := 4
          (gdb) set A_Rec := (Id => 42, Vals => (1, 2, 3, 4))

     As this example also illustrates, GDB is very loose about the usual
     rules concerning aggregates.  You may leave out some of the
     components of an array or record aggregate (such as the `Len'
     component in the assignment to `A_Rec' above); they will retain
     their original values upon assignment.  You may freely use dynamic
     values as indices in component associations.  You may even use
     overlapping or redundant component associations, although which
     component values are assigned in such cases is not defined.

   * Calls to dispatching subprograms are not implemented.

   * The overloading algorithm is much more limited (i.e., less
     selective) than that of real Ada.  It makes only limited use of
     the context in which a subexpression appears to resolve its
     meaning, and it is much looser in its rules for allowing type
     matches.  As a result, some function calls will be ambiguous, and
     the user will be asked to choose the proper resolution.

   * The `new' operator is not implemented.

   * Entry calls are not implemented.

   * Aside from printing, arithmetic operations on the native VAX
     floating-point formats are not supported.

   * It is not possible to slice a packed array.

   * The names `True' and `False', when not part of a qualified name,
     are interpreted as if implicitly prefixed by `Standard',
     regardless of context.  Should your program redefine these names
     in a package or procedure (at best a dubious practice), you will
     have to use fully qualified names to access their new definitions.


File: gdb.info,  Node: Additions to Ada,  Next: Stopping Before Main Program,  Prev: Omissions from Ada,  Up: Ada

15.4.9.3 Additions to Ada
.........................

As it does for other languages, GDB makes certain generic extensions to
Ada (*note Expressions::):

   * If the expression E is a variable residing in memory (typically a
     local variable or array element) and N is a positive integer, then
     `E@N' displays the values of E and the N-1 adjacent variables
     following it in memory as an array.  In Ada, this operator is
     generally not necessary, since its prime use is in displaying
     parts of an array, and slicing will usually do this in Ada.
     However, there are occasional uses when debugging programs in
     which certain debugging information has been optimized away.

   * `B::VAR' means "the variable named VAR that appears in function or
     file B."  When B is a file name, you must typically surround it in
     single quotes.

   * The expression `{TYPE} ADDR' means "the variable of type TYPE that
     appears at address ADDR."

   * A name starting with `$' is a convenience variable (*note
     Convenience Vars::) or a machine register (*note Registers::).

   In addition, GDB provides a few other shortcuts and outright
additions specific to Ada:

   * The assignment statement is allowed as an expression, returning
     its right-hand operand as its value.  Thus, you may enter

          (gdb) set x := y + 3
          (gdb) print A(tmp := y + 1)

   * The semicolon is allowed as an "operator,"  returning as its value
     the value of its right-hand operand.  This allows, for example,
     complex conditional breaks:

          (gdb) break f
          (gdb) condition 1 (report(i); k += 1; A(k) > 100)

   * Rather than use catenation and symbolic character names to
     introduce special characters into strings, one may instead use a
     special bracket notation, which is also used to print strings.  A
     sequence of characters of the form `["XX"]' within a string or
     character literal denotes the (single) character whose numeric
     encoding is XX in hexadecimal.  The sequence of characters `["""]'
     also denotes a single quotation mark in strings.   For example,
             "One line.["0a"]Next line.["0a"]"
     contains an ASCII newline character (`Ada.Characters.Latin_1.LF')
     after each period.

   * The subtype used as a prefix for the attributes 'Pos, 'Min, and
     'Max is optional (and is ignored in any case).  For example, it is
     valid to write

          (gdb) print 'max(x, y)

   * When printing arrays, GDB uses positional notation when the array
     has a lower bound of 1, and uses a modified named notation
     otherwise.  For example, a one-dimensional array of three integers
     with a lower bound of 3 might print as

          (3 => 10, 17, 1)

     That is, in contrast to valid Ada, only the first component has a
     `=>' clause.

   * You may abbreviate attributes in expressions with any unique,
     multi-character subsequence of their names (an exact match gets
     preference).  For example, you may use a'len, a'gth, or a'lh in
     place of  a'length.

   * Since Ada is case-insensitive, the debugger normally maps
     identifiers you type to lower case.  The GNAT compiler uses
     upper-case characters for some of its internal identifiers, which
     are normally of no interest to users.  For the rare occasions when
     you actually have to look at them, enclose them in angle brackets
     to avoid the lower-case mapping.  For example,
          (gdb) print <JMPBUF_SAVE>[0]

   * Printing an object of class-wide type or dereferencing an
     access-to-class-wide value will display all the components of the
     object's specific type (as indicated by its run-time tag).
     Likewise, component selection on such a value will operate on the
     specific type of the object.



File: gdb.info,  Node: Stopping Before Main Program,  Next: Ada Tasks,  Prev: Additions to Ada,  Up: Ada

15.4.9.4 Stopping at the Very Beginning
.......................................

It is sometimes necessary to debug the program during elaboration, and
before reaching the main procedure.  As defined in the Ada Reference
Manual, the elaboration code is invoked from a procedure called
`adainit'.  To run your program up to the beginning of elaboration,
simply use the following two commands: `tbreak adainit' and `run'.


File: gdb.info,  Node: Ada Tasks,  Next: Ada Tasks and Core Files,  Prev: Stopping Before Main Program,  Up: Ada

15.4.9.5 Extensions for Ada Tasks
.................................

Support for Ada tasks is analogous to that for threads (*note
Threads::).  GDB provides the following task-related commands:

`info tasks'
     This command shows a list of current Ada tasks, as in the
     following example:

          (gdb) info tasks
            ID       TID P-ID Pri State                 Name
             1   8088000   0   15 Child Activation Wait main_task
             2   80a4000   1   15 Accept Statement      b
             3   809a800   1   15 Child Activation Wait a
          *  4   80ae800   3   15 Runnable              c

     In this listing, the asterisk before the last task indicates it to
     be the task currently being inspected.

    ID
          Represents GDB's internal task number.

    TID
          The Ada task ID.

    P-ID
          The parent's task ID (GDB's internal task number).

    Pri
          The base priority of the task.

    State
          Current state of the task.

         `Unactivated'
               The task has been created but has not been activated.
               It cannot be executing.

         `Runnable'
               The task is not blocked for any reason known to Ada.
               (It may be waiting for a mutex, though.) It is
               conceptually "executing" in normal mode.

         `Terminated'
               The task is terminated, in the sense of ARM 9.3 (5).
               Any dependents that were waiting on terminate
               alternatives have been awakened and have terminated
               themselves.

         `Child Activation Wait'
               The task is waiting for created tasks to complete
               activation.

         `Accept Statement'
               The task is waiting on an accept or selective wait
               statement.

         `Waiting on entry call'
               The task is waiting on an entry call.

         `Async Select Wait'
               The task is waiting to start the abortable part of an
               asynchronous select statement.

         `Delay Sleep'
               The task is waiting on a select statement with only a
               delay alternative open.

         `Child Termination Wait'
               The task is sleeping having completed a master within
               itself, and is waiting for the tasks dependent on that
               master to become terminated or waiting on a terminate
               Phase.

         `Wait Child in Term Alt'
               The task is sleeping waiting for tasks on terminate
               alternatives to finish terminating.

         `Accepting RV with TASKNO'
               The task is accepting a rendez-vous with the task TASKNO.

    Name
          Name of the task in the program.


`info task TASKNO'
     This command shows detailled informations on the specified task,
     as in the following example:
          (gdb) info tasks
            ID       TID P-ID Pri State                  Name
             1   8077880    0  15 Child Activation Wait  main_task
          *  2   807c468    1  15 Runnable               task_1
          (gdb) info task 2
          Ada Task: 0x807c468
          Name: task_1
          Thread: 0x807f378
          Parent: 1 (main_task)
          Base Priority: 15
          State: Runnable

`task'
     This command prints the ID of the current task.

          (gdb) info tasks
            ID       TID P-ID Pri State                  Name
             1   8077870    0  15 Child Activation Wait  main_task
          *  2   807c458    1  15 Runnable               t
          (gdb) task
          [Current task is 2]

`task TASKNO'
     This command is like the `thread THREADNO' command (*note
     Threads::).  It switches the context of debugging from the current
     task to the given task.

          (gdb) info tasks
            ID       TID P-ID Pri State                  Name
             1   8077870    0  15 Child Activation Wait  main_task
          *  2   807c458    1  15 Runnable               t
          (gdb) task 1
          [Switching to task 1]
          #0  0x8067726 in pthread_cond_wait ()
          (gdb) bt
          #0  0x8067726 in pthread_cond_wait ()
          #1  0x8056714 in system.os_interface.pthread_cond_wait ()
          #2  0x805cb63 in system.task_primitives.operations.sleep ()
          #3  0x806153e in system.tasking.stages.activate_tasks ()
          #4  0x804aacc in un () at un.adb:5

`break LINESPEC task TASKNO'
`break LINESPEC task TASKNO if ...'
     These commands are like the `break ... thread ...' command (*note
     Thread Stops::).  LINESPEC specifies source lines, as described in
     *Note Specify Location::.

     Use the qualifier `task TASKNO' with a breakpoint command to
     specify that you only want GDB to stop the program when a
     particular Ada task reaches this breakpoint.  TASKNO is one of the
     numeric task identifiers assigned by GDB, shown in the first
     column of the `info tasks' display.

     If you do not specify `task TASKNO' when you set a breakpoint, the
     breakpoint applies to _all_ tasks of your program.

     You can use the `task' qualifier on conditional breakpoints as
     well; in this case, place `task TASKNO' before the breakpoint
     condition (before the `if').

     For example,

          (gdb) info tasks
            ID       TID P-ID Pri State                 Name
             1 140022020   0   15 Child Activation Wait main_task
             2 140045060   1   15 Accept/Select Wait    t2
             3 140044840   1   15 Runnable              t1
          *  4 140056040   1   15 Runnable              t3
          (gdb) b 15 task 2
          Breakpoint 5 at 0x120044cb0: file test_task_debug.adb, line 15.
          (gdb) cont
          Continuing.
          task # 1 running
          task # 2 running

          Breakpoint 5, test_task_debug () at test_task_debug.adb:15
          15               flush;
          (gdb) info tasks
            ID       TID P-ID Pri State                 Name
             1 140022020   0   15 Child Activation Wait main_task
          *  2 140045060   1   15 Runnable              t2
             3 140044840   1   15 Runnable              t1
             4 140056040   1   15 Delay Sleep           t3


File: gdb.info,  Node: Ada Tasks and Core Files,  Next: Ravenscar Profile,  Prev: Ada Tasks,  Up: Ada

15.4.9.6 Tasking Support when Debugging Core Files
..................................................

When inspecting a core file, as opposed to debugging a live program,
tasking support may be limited or even unavailable, depending on the
platform being used.  For instance, on x86-linux, the list of tasks is
available, but task switching is not supported.  On Tru64, however,
task switching will work as usual.

   On certain platforms, including Tru64, the debugger needs to perform
some memory writes in order to provide Ada tasking support.  When
inspecting a core file, this means that the core file must be opened
with read-write privileges, using the command `"set write on"' (*note
Patching::).  Under these circumstances, you should make a backup copy
of the core file before inspecting it with GDB.


File: gdb.info,  Node: Ravenscar Profile,  Next: Ada Glitches,  Prev: Ada Tasks and Core Files,  Up: Ada

15.4.9.7 Tasking Support when using the Ravenscar Profile
.........................................................

The "Ravenscar Profile" is a subset of the Ada tasking features,
specifically designed for systems with safety-critical real-time
requirements.

`set ravenscar task-switching on'
     Allows task switching when debugging a program that uses the
     Ravenscar Profile.  This is the default.

`set ravenscar task-switching off'
     Turn off task switching when debugging a program that uses the
     Ravenscar Profile.  This is mostly intended to disable the code
     that adds support for the Ravenscar Profile, in case a bug in
     either GDB or in the Ravenscar runtime is preventing GDB from
     working properly.  To be effective, this command should be run
     before the program is started.

`show ravenscar task-switching'
     Show whether it is possible to switch from task to task in a
     program using the Ravenscar Profile.



File: gdb.info,  Node: Ada Glitches,  Prev: Ravenscar Profile,  Up: Ada

15.4.9.8 Known Peculiarities of Ada Mode
........................................

Besides the omissions listed previously (*note Omissions from Ada::),
we know of several problems with and limitations of Ada mode in GDB,
some of which will be fixed with planned future releases of the debugger
and the GNU Ada compiler.

   * Static constants that the compiler chooses not to materialize as
     objects in storage are invisible to the debugger.

   * Named parameter associations in function argument lists are
     ignored (the argument lists are treated as positional).

   * Many useful library packages are currently invisible to the
     debugger.

   * Fixed-point arithmetic, conversions, input, and output is carried
     out using floating-point arithmetic, and may give results that
     only approximate those on the host machine.

   * The GNAT compiler never generates the prefix `Standard' for any of
     the standard symbols defined by the Ada language.  GDB knows about
     this: it will strip the prefix from names when you use it, and
     will never look for a name you have so qualified among local
     symbols, nor match against symbols in other packages or
     subprograms.  If you have defined entities anywhere in your
     program other than parameters and local variables whose simple
     names match names in `Standard', GNAT's lack of qualification here
     can cause confusion.  When this happens, you can usually resolve
     the confusion by qualifying the problematic names with package
     `Standard' explicitly.

   Older versions of the compiler sometimes generate erroneous debugging
information, resulting in the debugger incorrectly printing the value
of affected entities.  In some cases, the debugger is able to work
around an issue automatically. In other cases, the debugger is able to
work around the issue, but the work-around has to be specifically
enabled.

`set ada trust-PAD-over-XVS on'
     Configure GDB to strictly follow the GNAT encoding when computing
     the value of Ada entities, particularly when `PAD' and `PAD___XVS'
     types are involved (see `ada/exp_dbug.ads' in the GCC sources for
     a complete description of the encoding used by the GNAT compiler).
     This is the default.

`set ada trust-PAD-over-XVS off'
     This is related to the encoding using by the GNAT compiler.  If
     GDB sometimes prints the wrong value for certain entities,
     changing `ada trust-PAD-over-XVS' to `off' activates a work-around
     which may fix the issue.  It is always safe to set `ada
     trust-PAD-over-XVS' to `off', but this incurs a slight performance
     penalty, so it is recommended to leave this setting to `on' unless
     necessary.



File: gdb.info,  Node: Unsupported Languages,  Prev: Supported Languages,  Up: Languages

15.5 Unsupported Languages
==========================

In addition to the other fully-supported programming languages, GDB
also provides a pseudo-language, called `minimal'.  It does not
represent a real programming language, but provides a set of
capabilities close to what the C or assembly languages provide.  This
should allow most simple operations to be performed while debugging an
application that uses a language currently not supported by GDB.

   If the language is set to `auto', GDB will automatically select this
language if the current frame corresponds to an unsupported language.


File: gdb.info,  Node: Symbols,  Next: Altering,  Prev: Languages,  Up: Top

16 Examining the Symbol Table
*****************************

The commands described in this chapter allow you to inquire about the
symbols (names of variables, functions and types) defined in your
program.  This information is inherent in the text of your program and
does not change as your program executes.  GDB finds it in your
program's symbol table, in the file indicated when you started GDB
(*note Choosing Files: File Options.), or by one of the file-management
commands (*note Commands to Specify Files: Files.).

   Occasionally, you may need to refer to symbols that contain unusual
characters, which GDB ordinarily treats as word delimiters.  The most
frequent case is in referring to static variables in other source files
(*note Program Variables: Variables.).  File names are recorded in
object files as debugging symbols, but GDB would ordinarily parse a
typical file name, like `foo.c', as the three words `foo' `.' `c'.  To
allow GDB to recognize `foo.c' as a single symbol, enclose it in single
quotes; for example,

     p 'foo.c'::x

looks up the value of `x' in the scope of the file `foo.c'.

`set case-sensitive on'
`set case-sensitive off'
`set case-sensitive auto'
     Normally, when GDB looks up symbols, it matches their names with
     case sensitivity determined by the current source language.
     Occasionally, you may wish to control that.  The command `set
     case-sensitive' lets you do that by specifying `on' for
     case-sensitive matches or `off' for case-insensitive ones.  If you
     specify `auto', case sensitivity is reset to the default suitable
     for the source language.  The default is case-sensitive matches
     for all languages except for Fortran, for which the default is
     case-insensitive matches.

`show case-sensitive'
     This command shows the current setting of case sensitivity for
     symbols lookups.

`info address SYMBOL'
     Describe where the data for SYMBOL is stored.  For a register
     variable, this says which register it is kept in.  For a
     non-register local variable, this prints the stack-frame offset at
     which the variable is always stored.

     Note the contrast with `print &SYMBOL', which does not work at all
     for a register variable, and for a stack local variable prints the
     exact address of the current instantiation of the variable.

`info symbol ADDR'
     Print the name of a symbol which is stored at the address ADDR.
     If no symbol is stored exactly at ADDR, GDB prints the nearest
     symbol and an offset from it:

          (gdb) info symbol 0x54320
          _initialize_vx + 396 in section .text

     This is the opposite of the `info address' command.  You can use
     it to find out the name of a variable or a function given its
     address.

     For dynamically linked executables, the name of executable or
     shared library containing the symbol is also printed:

          (gdb) info symbol 0x400225
          _start + 5 in section .text of /tmp/a.out
          (gdb) info symbol 0x2aaaac2811cf
          __read_nocancel + 6 in section .text of /usr/lib64/libc.so.6

`whatis [ARG]'
     Print the data type of ARG, which can be either an expression or a
     name of a data type.  With no argument, print the data type of
     `$', the last value in the value history.

     If ARG is an expression (*note Expressions: Expressions.), it is
     not actually evaluated, and any side-effecting operations (such as
     assignments or function calls) inside it do not take place.

     If ARG is a variable or an expression, `whatis' prints its literal
     type as it is used in the source code.  If the type was defined
     using a `typedef', `whatis' will _not_ print the data type
     underlying the `typedef'.  If the type of the variable or the
     expression is a compound data type, such as `struct' or  `class',
     `whatis' never prints their fields or methods.  It just prints the
     `struct'/`class' name (a.k.a. its "tag").  If you want to see the
     members of such a compound data type, use `ptype'.

     If ARG is a type name that was defined using `typedef', `whatis'
     "unrolls" only one level of that `typedef'.  Unrolling means that
     `whatis' will show the underlying type used in the `typedef'
     declaration of ARG.  However, if that underlying type is also a
     `typedef', `whatis' will not unroll it.

     For C code, the type names may also have the form `class
     CLASS-NAME', `struct STRUCT-TAG', `union UNION-TAG' or `enum
     ENUM-TAG'.

`ptype [ARG]'
     `ptype' accepts the same arguments as `whatis', but prints a
     detailed description of the type, instead of just the name of the
     type.  *Note Expressions: Expressions.

     Contrary to `whatis', `ptype' always unrolls any `typedef's in its
     argument declaration, whether the argument is a variable,
     expression, or a data type.  This means that `ptype' of a variable
     or an expression will not print literally its type as present in
     the source code--use `whatis' for that.  `typedef's at the pointer
     or reference targets are also unrolled.  Only `typedef's of
     fields, methods and inner `class typedef's of `struct's, `class'es
     and `union's are not unrolled even with `ptype'.

     For example, for this variable declaration:

          typedef double real_t;
          struct complex { real_t real; double imag; };
          typedef struct complex complex_t;
          complex_t var;
          real_t *real_pointer_var;

     the two commands give this output:

          (gdb) whatis var
          type = complex_t
          (gdb) ptype var
          type = struct complex {
              real_t real;
              double imag;
          }
          (gdb) whatis complex_t
          type = struct complex
          (gdb) whatis struct complex
          type = struct complex
          (gdb) ptype struct complex
          type = struct complex {
              real_t real;
              double imag;
          }
          (gdb) whatis real_pointer_var
          type = real_t *
          (gdb) ptype real_pointer_var
          type = double *

     As with `whatis', using `ptype' without an argument refers to the
     type of `$', the last value in the value history.

     Sometimes, programs use opaque data types or incomplete
     specifications of complex data structure.  If the debug
     information included in the program does not allow GDB to display
     a full declaration of the data type, it will say `<incomplete
     type>'.  For example, given these declarations:

              struct foo;
              struct foo *fooptr;

     but no definition for `struct foo' itself, GDB will say:

            (gdb) ptype foo
            $1 = <incomplete type>

     "Incomplete type" is C terminology for data types that are not
     completely specified.

`info types REGEXP'
`info types'
     Print a brief description of all types whose names match the
     regular expression REGEXP (or all types in your program, if you
     supply no argument).  Each complete typename is matched as though
     it were a complete line; thus, `i type value' gives information on
     all types in your program whose names include the string `value',
     but `i type ^value$' gives information only on types whose complete
     name is `value'.

     This command differs from `ptype' in two ways: first, like
     `whatis', it does not print a detailed description; second, it
     lists all source files where a type is defined.

`info scope LOCATION'
     List all the variables local to a particular scope.  This command
     accepts a LOCATION argument--a function name, a source line, or an
     address preceded by a `*', and prints all the variables local to
     the scope defined by that location.  (*Note Specify Location::, for
     details about supported forms of LOCATION.)  For example:

          (gdb) info scope command_line_handler
          Scope for command_line_handler:
          Symbol rl is an argument at stack/frame offset 8, length 4.
          Symbol linebuffer is in static storage at address 0x150a18, length 4.
          Symbol linelength is in static storage at address 0x150a1c, length 4.
          Symbol p is a local variable in register $esi, length 4.
          Symbol p1 is a local variable in register $ebx, length 4.
          Symbol nline is a local variable in register $edx, length 4.
          Symbol repeat is a local variable at frame offset -8, length 4.

     This command is especially useful for determining what data to
     collect during a "trace experiment", see *Note collect: Tracepoint
     Actions.

`info source'
     Show information about the current source file--that is, the
     source file for the function containing the current point of
     execution:
        * the name of the source file, and the directory containing it,

        * the directory it was compiled in,

        * its length, in lines,

        * which programming language it is written in,

        * whether the executable includes debugging information for
          that file, and if so, what format the information is in
          (e.g., STABS, Dwarf 2, etc.), and

        * whether the debugging information includes information about
          preprocessor macros.

`info sources'
     Print the names of all source files in your program for which
     there is debugging information, organized into two lists: files
     whose symbols have already been read, and files whose symbols will
     be read when needed.

`info functions'
     Print the names and data types of all defined functions.

`info functions REGEXP'
     Print the names and data types of all defined functions whose
     names contain a match for regular expression REGEXP.  Thus, `info
     fun step' finds all functions whose names include `step'; `info
     fun ^step' finds those whose names start with `step'.  If a
     function name contains characters that conflict with the regular
     expression language (e.g.  `operator*()'), they may be quoted with
     a backslash.

`info variables'
     Print the names and data types of all variables that are defined
     outside of functions (i.e. excluding local variables).

`info variables REGEXP'
     Print the names and data types of all variables (except for local
     variables) whose names contain a match for regular expression
     REGEXP.

`info classes'
`info classes REGEXP'
     Display all Objective-C classes in your program, or (with the
     REGEXP argument) all those matching a particular regular
     expression.

`info selectors'
`info selectors REGEXP'
     Display all Objective-C selectors in your program, or (with the
     REGEXP argument) all those matching a particular regular
     expression.

`set opaque-type-resolution on'
     Tell GDB to resolve opaque types.  An opaque type is a type
     declared as a pointer to a `struct', `class', or `union'--for
     example, `struct MyType *'--that is used in one source file
     although the full declaration of `struct MyType' is in another
     source file.  The default is on.

     A change in the setting of this subcommand will not take effect
     until the next time symbols for a file are loaded.

`set opaque-type-resolution off'
     Tell GDB not to resolve opaque types.  In this case, the type is
     printed as follows:
          {<no data fields>}

`show opaque-type-resolution'
     Show whether opaque types are resolved or not.

`maint print symbols FILENAME'
`maint print psymbols FILENAME'
`maint print msymbols FILENAME'
     Write a dump of debugging symbol data into the file FILENAME.
     These commands are used to debug the GDB symbol-reading code.  Only
     symbols with debugging data are included.  If you use `maint print
     symbols', GDB includes all the symbols for which it has already
     collected full details: that is, FILENAME reflects symbols for
     only those files whose symbols GDB has read.  You can use the
     command `info sources' to find out which files these are.  If you
     use `maint print psymbols' instead, the dump shows information
     about symbols that GDB only knows partially--that is, symbols
     defined in files that GDB has skimmed, but not yet read
     completely.  Finally, `maint print msymbols' dumps just the
     minimal symbol information required for each object file from
     which GDB has read some symbols.  *Note Commands to Specify Files:
     Files, for a discussion of how GDB reads symbols (in the
     description of `symbol-file').

`maint info symtabs [ REGEXP ]'
`maint info psymtabs [ REGEXP ]'
     List the `struct symtab' or `struct partial_symtab' structures
     whose names match REGEXP.  If REGEXP is not given, list them all.
     The output includes expressions which you can copy into a GDB
     debugging this one to examine a particular structure in more
     detail.  For example:

          (gdb) maint info psymtabs dwarf2read
          { objfile /home/gnu/build/gdb/gdb
            ((struct objfile *) 0x82e69d0)
            { psymtab /home/gnu/src/gdb/dwarf2read.c
              ((struct partial_symtab *) 0x8474b10)
              readin no
              fullname (null)
              text addresses 0x814d3c8 -- 0x8158074
              globals (* (struct partial_symbol **) 0x8507a08 @ 9)
              statics (* (struct partial_symbol **) 0x40e95b78 @ 2882)
              dependencies (none)
            }
          }
          (gdb) maint info symtabs
          (gdb)
     We see that there is one partial symbol table whose filename
     contains the string `dwarf2read', belonging to the `gdb'
     executable; and we see that GDB has not read in any symtabs yet at
     all.  If we set a breakpoint on a function, that will cause GDB to
     read the symtab for the compilation unit containing that function:

          (gdb) break dwarf2_psymtab_to_symtab
          Breakpoint 1 at 0x814e5da: file /home/gnu/src/gdb/dwarf2read.c,
          line 1574.
          (gdb) maint info symtabs
          { objfile /home/gnu/build/gdb/gdb
            ((struct objfile *) 0x82e69d0)
            { symtab /home/gnu/src/gdb/dwarf2read.c
              ((struct symtab *) 0x86c1f38)
              dirname (null)
              fullname (null)
              blockvector ((struct blockvector *) 0x86c1bd0) (primary)
              linetable ((struct linetable *) 0x8370fa0)
              debugformat DWARF 2
            }
          }
          (gdb)


File: gdb.info,  Node: Altering,  Next: GDB Files,  Prev: Symbols,  Up: Top

17 Altering Execution
*********************

Once you think you have found an error in your program, you might want
to find out for certain whether correcting the apparent error would
lead to correct results in the rest of the run.  You can find the
answer by experiment, using the GDB features for altering execution of
the program.

   For example, you can store new values into variables or memory
locations, give your program a signal, restart it at a different
address, or even return prematurely from a function.

* Menu:

* Assignment::                  Assignment to variables
* Jumping::                     Continuing at a different address
* Signaling::                   Giving your program a signal
* Returning::                   Returning from a function
* Calling::                     Calling your program's functions
* Patching::                    Patching your program


File: gdb.info,  Node: Assignment,  Next: Jumping,  Up: Altering

17.1 Assignment to Variables
============================

To alter the value of a variable, evaluate an assignment expression.
*Note Expressions: Expressions.  For example,

     print x=4

stores the value 4 into the variable `x', and then prints the value of
the assignment expression (which is 4).  *Note Using GDB with Different
Languages: Languages, for more information on operators in supported
languages.

   If you are not interested in seeing the value of the assignment, use
the `set' command instead of the `print' command.  `set' is really the
same as `print' except that the expression's value is not printed and
is not put in the value history (*note Value History: Value History.).
The expression is evaluated only for its effects.

   If the beginning of the argument string of the `set' command appears
identical to a `set' subcommand, use the `set variable' command instead
of just `set'.  This command is identical to `set' except for its lack
of subcommands.  For example, if your program has a variable `width',
you get an error if you try to set a new value with just `set
width=13', because GDB has the command `set width':

     (gdb) whatis width
     type = double
     (gdb) p width
     $4 = 13
     (gdb) set width=47
     Invalid syntax in expression.

The invalid expression, of course, is `=47'.  In order to actually set
the program's variable `width', use

     (gdb) set var width=47

   Because the `set' command has many subcommands that can conflict
with the names of program variables, it is a good idea to use the `set
variable' command instead of just `set'.  For example, if your program
has a variable `g', you run into problems if you try to set a new value
with just `set g=4', because GDB has the command `set gnutarget',
abbreviated `set g':

     (gdb) whatis g
     type = double
     (gdb) p g
     $1 = 1
     (gdb) set g=4
     (gdb) p g
     $2 = 1
     (gdb) r
     The program being debugged has been started already.
     Start it from the beginning? (y or n) y
     Starting program: /home/smith/cc_progs/a.out
     "/home/smith/cc_progs/a.out": can't open to read symbols:
                                      Invalid bfd target.
     (gdb) show g
     The current BFD target is "=4".

The program variable `g' did not change, and you silently set the
`gnutarget' to an invalid value.  In order to set the variable `g', use

     (gdb) set var g=4

   GDB allows more implicit conversions in assignments than C; you can
freely store an integer value into a pointer variable or vice versa,
and you can convert any structure to any other structure that is the
same length or shorter.

   To store values into arbitrary places in memory, use the `{...}'
construct to generate a value of specified type at a specified address
(*note Expressions: Expressions.).  For example, `{int}0x83040' refers
to memory location `0x83040' as an integer (which implies a certain size
and representation in memory), and

     set {int}0x83040 = 4

stores the value 4 into that memory location.


File: gdb.info,  Node: Jumping,  Next: Signaling,  Prev: Assignment,  Up: Altering

17.2 Continuing at a Different Address
======================================

Ordinarily, when you continue your program, you do so at the place where
it stopped, with the `continue' command.  You can instead continue at
an address of your own choosing, with the following commands:

`jump LINESPEC'
`jump LOCATION'
     Resume execution at line LINESPEC or at address given by LOCATION.
     Execution stops again immediately if there is a breakpoint there.
     *Note Specify Location::, for a description of the different
     forms of LINESPEC and LOCATION.  It is common practice to use the
     `tbreak' command in conjunction with `jump'.  *Note Setting
     Breakpoints: Set Breaks.

     The `jump' command does not change the current stack frame, or the
     stack pointer, or the contents of any memory location or any
     register other than the program counter.  If line LINESPEC is in a
     different function from the one currently executing, the results
     may be bizarre if the two functions expect different patterns of
     arguments or of local variables.  For this reason, the `jump'
     command requests confirmation if the specified line is not in the
     function currently executing.  However, even bizarre results are
     predictable if you are well acquainted with the machine-language
     code of your program.

   On many systems, you can get much the same effect as the `jump'
command by storing a new value into the register `$pc'.  The difference
is that this does not start your program running; it only changes the
address of where it _will_ run when you continue.  For example,

     set $pc = 0x485

makes the next `continue' command or stepping command execute at
address `0x485', rather than at the address where your program stopped.
*Note Continuing and Stepping: Continuing and Stepping.

   The most common occasion to use the `jump' command is to back
up--perhaps with more breakpoints set--over a portion of a program that
has already executed, in order to examine its execution in more detail.


File: gdb.info,  Node: Signaling,  Next: Returning,  Prev: Jumping,  Up: Altering

17.3 Giving your Program a Signal
=================================

`signal SIGNAL'
     Resume execution where your program stopped, but immediately give
     it the signal SIGNAL.  SIGNAL can be the name or the number of a
     signal.  For example, on many systems `signal 2' and `signal
     SIGINT' are both ways of sending an interrupt signal.

     Alternatively, if SIGNAL is zero, continue execution without
     giving a signal.  This is useful when your program stopped on
     account of a signal and would ordinary see the signal when resumed
     with the `continue' command; `signal 0' causes it to resume
     without a signal.

     `signal' does not repeat when you press <RET> a second time after
     executing the command.

   Invoking the `signal' command is not the same as invoking the `kill'
utility from the shell.  Sending a signal with `kill' causes GDB to
decide what to do with the signal depending on the signal handling
tables (*note Signals::).  The `signal' command passes the signal
directly to your program.


File: gdb.info,  Node: Returning,  Next: Calling,  Prev: Signaling,  Up: Altering

17.4 Returning from a Function
==============================

`return'
`return EXPRESSION'
     You can cancel execution of a function call with the `return'
     command.  If you give an EXPRESSION argument, its value is used as
     the function's return value.

   When you use `return', GDB discards the selected stack frame (and
all frames within it).  You can think of this as making the discarded
frame return prematurely.  If you wish to specify a value to be
returned, give that value as the argument to `return'.

   This pops the selected stack frame (*note Selecting a Frame:
Selection.), and any other frames inside of it, leaving its caller as
the innermost remaining frame.  That frame becomes selected.  The
specified value is stored in the registers used for returning values of
functions.

   The `return' command does not resume execution; it leaves the
program stopped in the state that would exist if the function had just
returned.  In contrast, the `finish' command (*note Continuing and
Stepping: Continuing and Stepping.) resumes execution until the
selected stack frame returns naturally.

   GDB needs to know how the EXPRESSION argument should be set for the
inferior.  The concrete registers assignment depends on the OS ABI and
the type being returned by the selected stack frame.  For example it is
common for OS ABI to return floating point values in FPU registers
while integer values in CPU registers.  Still some ABIs return even
floating point values in CPU registers.  Larger integer widths (such as
`long long int') also have specific placement rules.  GDB already knows
the OS ABI from its current target so it needs to find out also the
type being returned to make the assignment into the right register(s).

   Normally, the selected stack frame has debug info.  GDB will always
use the debug info instead of the implicit type of EXPRESSION when the
debug info is available.  For example, if you type `return -1', and the
function in the current stack frame is declared to return a `long long
int', GDB transparently converts the implicit `int' value of -1 into a
`long long int':

     Breakpoint 1, func () at gdb.base/return-nodebug.c:29
     29        return 31;
     (gdb) return -1
     Make func return now? (y or n) y
     #0  0x004004f6 in main () at gdb.base/return-nodebug.c:43
     43        printf ("result=%lld\n", func ());
     (gdb)

   However, if the selected stack frame does not have a debug info,
e.g., if the function was compiled without debug info, GDB has to find
out the type to return from user.  Specifying a different type by
mistake may set the value in different inferior registers than the
caller code expects.  For example, typing `return -1' with its implicit
type `int' would set only a part of a `long long int' result for a
debug info less function (on 32-bit architectures).  Therefore the user
is required to specify the return type by an appropriate cast
explicitly:

     Breakpoint 2, 0x0040050b in func ()
     (gdb) return -1
     Return value type not available for selected stack frame.
     Please use an explicit cast of the value to return.
     (gdb) return (long long int) -1
     Make selected stack frame return now? (y or n) y
     #0  0x00400526 in main ()
     (gdb)


File: gdb.info,  Node: Calling,  Next: Patching,  Prev: Returning,  Up: Altering

17.5 Calling Program Functions
==============================

`print EXPR'
     Evaluate the expression EXPR and display the resulting value.
     EXPR may include calls to functions in the program being debugged.

`call EXPR'
     Evaluate the expression EXPR without displaying `void' returned
     values.

     You can use this variant of the `print' command if you want to
     execute a function from your program that does not return anything
     (a.k.a. "a void function"), but without cluttering the output with
     `void' returned values that GDB will otherwise print.  If the
     result is not void, it is printed and saved in the value history.

   It is possible for the function you call via the `print' or `call'
command to generate a signal (e.g., if there's a bug in the function,
or if you passed it incorrect arguments).  What happens in that case is
controlled by the `set unwindonsignal' command.

   Similarly, with a C++ program it is possible for the function you
call via the `print' or `call' command to generate an exception that is
not handled due to the constraints of the dummy frame.  In this case,
any exception that is raised in the frame, but has an out-of-frame
exception handler will not be found.  GDB builds a dummy-frame for the
inferior function call, and the unwinder cannot seek for exception
handlers outside of this dummy-frame.  What happens in that case is
controlled by the `set unwind-on-terminating-exception' command.

`set unwindonsignal'
     Set unwinding of the stack if a signal is received while in a
     function that GDB called in the program being debugged.  If set to
     on, GDB unwinds the stack it created for the call and restores the
     context to what it was before the call.  If set to off (the
     default), GDB stops in the frame where the signal was received.

`show unwindonsignal'
     Show the current setting of stack unwinding in the functions
     called by GDB.

`set unwind-on-terminating-exception'
     Set unwinding of the stack if a C++ exception is raised, but left
     unhandled while in a function that GDB called in the program being
     debugged.  If set to on (the default), GDB unwinds the stack it
     created for the call and restores the context to what it was before
     the call.  If set to off, GDB the exception is delivered to the
     default C++ exception handler and the inferior terminated.

`show unwind-on-terminating-exception'
     Show the current setting of stack unwinding in the functions
     called by GDB.


   Sometimes, a function you wish to call is actually a "weak alias"
for another function.  In such case, GDB might not pick up the type
information, including the types of the function arguments, which
causes GDB to call the inferior function incorrectly.  As a result, the
called function will function erroneously and may even crash.  A
solution to that is to use the name of the aliased function instead.


File: gdb.info,  Node: Patching,  Prev: Calling,  Up: Altering

17.6 Patching Programs
======================

By default, GDB opens the file containing your program's executable
code (or the corefile) read-only.  This prevents accidental alterations
to machine code; but it also prevents you from intentionally patching
your program's binary.

   If you'd like to be able to patch the binary, you can specify that
explicitly with the `set write' command.  For example, you might want
to turn on internal debugging flags, or even to make emergency repairs.

`set write on'
`set write off'
     If you specify `set write on', GDB opens executable and core files
     for both reading and writing; if you specify `set write off' (the
     default), GDB opens them read-only.

     If you have already loaded a file, you must load it again (using
     the `exec-file' or `core-file' command) after changing `set
     write', for your new setting to take effect.

`show write'
     Display whether executable files and core files are opened for
     writing as well as reading.


File: gdb.info,  Node: GDB Files,  Next: Targets,  Prev: Altering,  Up: Top

18 GDB Files
************

GDB needs to know the file name of the program to be debugged, both in
order to read its symbol table and in order to start your program.  To
debug a core dump of a previous run, you must also tell GDB the name of
the core dump file.

* Menu:

* Files::                       Commands to specify files
* Separate Debug Files::        Debugging information in separate files
* Index Files::                 Index files speed up GDB
* Symbol Errors::               Errors reading symbol files
* Data Files::                  GDB data files


File: gdb.info,  Node: Files,  Next: Separate Debug Files,  Up: GDB Files

18.1 Commands to Specify Files
==============================

You may want to specify executable and core dump file names.  The usual
way to do this is at start-up time, using the arguments to GDB's
start-up commands (*note Getting In and Out of GDB: Invocation.).

   Occasionally it is necessary to change to a different file during a
GDB session.  Or you may run GDB and forget to specify a file you want
to use.  Or you are debugging a remote target via `gdbserver' (*note
file: Server.).  In these situations the GDB commands to specify new
files are useful.

`file FILENAME'
     Use FILENAME as the program to be debugged.  It is read for its
     symbols and for the contents of pure memory.  It is also the
     program executed when you use the `run' command.  If you do not
     specify a directory and the file is not found in the GDB working
     directory, GDB uses the environment variable `PATH' as a list of
     directories to search, just as the shell does when looking for a
     program to run.  You can change the value of this variable, for
     both GDB and your program, using the `path' command.

     You can load unlinked object `.o' files into GDB using the `file'
     command.  You will not be able to "run" an object file, but you
     can disassemble functions and inspect variables.  Also, if the
     underlying BFD functionality supports it, you could use `gdb
     -write' to patch object files using this technique.  Note that GDB
     can neither interpret nor modify relocations in this case, so
     branches and some initialized variables will appear to go to the
     wrong place.  But this feature is still handy from time to time.

`file'
     `file' with no argument makes GDB discard any information it has
     on both executable file and the symbol table.

`exec-file [ FILENAME ]'
     Specify that the program to be run (but not the symbol table) is
     found in FILENAME.  GDB searches the environment variable `PATH'
     if necessary to locate your program.  Omitting FILENAME means to
     discard information on the executable file.

`symbol-file [ FILENAME ]'
     Read symbol table information from file FILENAME.  `PATH' is
     searched when necessary.  Use the `file' command to get both symbol
     table and program to run from the same file.

     `symbol-file' with no argument clears out GDB information on your
     program's symbol table.

     The `symbol-file' command causes GDB to forget the contents of
     some breakpoints and auto-display expressions.  This is because
     they may contain pointers to the internal data recording symbols
     and data types, which are part of the old symbol table data being
     discarded inside GDB.

     `symbol-file' does not repeat if you press <RET> again after
     executing it once.

     When GDB is configured for a particular environment, it
     understands debugging information in whatever format is the
     standard generated for that environment; you may use either a GNU
     compiler, or other compilers that adhere to the local conventions.
     Best results are usually obtained from GNU compilers; for example,
     using `GCC' you can generate debugging information for optimized
     code.

     For most kinds of object files, with the exception of old SVR3
     systems using COFF, the `symbol-file' command does not normally
     read the symbol table in full right away.  Instead, it scans the
     symbol table quickly to find which source files and which symbols
     are present.  The details are read later, one source file at a
     time, as they are needed.

     The purpose of this two-stage reading strategy is to make GDB
     start up faster.  For the most part, it is invisible except for
     occasional pauses while the symbol table details for a particular
     source file are being read.  (The `set verbose' command can turn
     these pauses into messages if desired.  *Note Optional Warnings
     and Messages: Messages/Warnings.)

     We have not implemented the two-stage strategy for COFF yet.  When
     the symbol table is stored in COFF format, `symbol-file' reads the
     symbol table data in full right away.  Note that "stabs-in-COFF"
     still does the two-stage strategy, since the debug info is actually
     in stabs format.

`symbol-file [ -readnow ] FILENAME'
`file [ -readnow ] FILENAME'
     You can override the GDB two-stage strategy for reading symbol
     tables by using the `-readnow' option with any of the commands that
     load symbol table information, if you want to be sure GDB has the
     entire symbol table available.

`core-file [FILENAME]'
`core'
     Specify the whereabouts of a core dump file to be used as the
     "contents of memory".  Traditionally, core files contain only some
     parts of the address space of the process that generated them; GDB
     can access the executable file itself for other parts.

     `core-file' with no argument specifies that no core file is to be
     used.

     Note that the core file is ignored when your program is actually
     running under GDB.  So, if you have been running your program and
     you wish to debug a core file instead, you must kill the
     subprocess in which the program is running.  To do this, use the
     `kill' command (*note Killing the Child Process: Kill Process.).

`add-symbol-file FILENAME ADDRESS'
`add-symbol-file FILENAME ADDRESS [ -readnow ]'
`add-symbol-file FILENAME ADDRESS -s SECTION ADDRESS ...'
     The `add-symbol-file' command reads additional symbol table
     information from the file FILENAME.  You would use this command
     when FILENAME has been dynamically loaded (by some other means)
     into the program that is running.  ADDRESS should be the memory
     address at which the file has been loaded; GDB cannot figure this
     out for itself.  You can additionally specify an arbitrary number
     of `-s SECTION ADDRESS' pairs, to give an explicit section name
     and base address for that section.  You can specify any ADDRESS as
     an expression.

     The symbol table of the file FILENAME is added to the symbol table
     originally read with the `symbol-file' command.  You can use the
     `add-symbol-file' command any number of times; the new symbol data
     thus read keeps adding to the old.  To discard all old symbol data
     instead, use the `symbol-file' command without any arguments.

     Although FILENAME is typically a shared library file, an
     executable file, or some other object file which has been fully
     relocated for loading into a process, you can also load symbolic
     information from relocatable `.o' files, as long as:

        * the file's symbolic information refers only to linker symbols
          defined in that file, not to symbols defined by other object
          files,

        * every section the file's symbolic information refers to has
          actually been loaded into the inferior, as it appears in the
          file, and

        * you can determine the address at which every section was
          loaded, and provide these to the `add-symbol-file' command.

     Some embedded operating systems, like Sun Chorus and VxWorks, can
     load relocatable files into an already running program; such
     systems typically make the requirements above easy to meet.
     However, it's important to recognize that many native systems use
     complex link procedures (`.linkonce' section factoring and C++
     constructor table assembly, for example) that make the
     requirements difficult to meet.  In general, one cannot assume
     that using `add-symbol-file' to read a relocatable object file's
     symbolic information will have the same effect as linking the
     relocatable object file into the program in the normal way.

     `add-symbol-file' does not repeat if you press <RET> after using
     it.

`add-symbol-file-from-memory ADDRESS'
     Load symbols from the given ADDRESS in a dynamically loaded object
     file whose image is mapped directly into the inferior's memory.
     For example, the Linux kernel maps a `syscall DSO' into each
     process's address space; this DSO provides kernel-specific code for
     some system calls.  The argument can be any expression whose
     evaluation yields the address of the file's shared object file
     header.  For this command to work, you must have used
     `symbol-file' or `exec-file' commands in advance.

`add-shared-symbol-files LIBRARY-FILE'
`assf LIBRARY-FILE'
     The `add-shared-symbol-files' command can currently be used only
     in the Cygwin build of GDB on MS-Windows OS, where it is an alias
     for the `dll-symbols' command (*note Cygwin Native::).  GDB
     automatically looks for shared libraries, however if GDB does not
     find yours, you can invoke `add-shared-symbol-files'.  It takes
     one argument: the shared library's file name.  `assf' is a
     shorthand alias for `add-shared-symbol-files'.

`section SECTION ADDR'
     The `section' command changes the base address of the named
     SECTION of the exec file to ADDR.  This can be used if the exec
     file does not contain section addresses, (such as in the `a.out'
     format), or when the addresses specified in the file itself are
     wrong.  Each section must be changed separately.  The `info files'
     command, described below, lists all the sections and their
     addresses.

`info files'
`info target'
     `info files' and `info target' are synonymous; both print the
     current target (*note Specifying a Debugging Target: Targets.),
     including the names of the executable and core dump files
     currently in use by GDB, and the files from which symbols were
     loaded.  The command `help target' lists all possible targets
     rather than current ones.

`maint info sections'
     Another command that can give you extra information about program
     sections is `maint info sections'.  In addition to the section
     information displayed by `info files', this command displays the
     flags and file offset of each section in the executable and core
     dump files.  In addition, `maint info sections' provides the
     following command options (which may be arbitrarily combined):

    `ALLOBJ'
          Display sections for all loaded object files, including
          shared libraries.

    `SECTIONS'
          Display info only for named SECTIONS.

    `SECTION-FLAGS'
          Display info only for sections for which SECTION-FLAGS are
          true.  The section flags that GDB currently knows about are:
         `ALLOC'
               Section will have space allocated in the process when
               loaded.  Set for all sections except those containing
               debug information.

         `LOAD'
               Section will be loaded from the file into the child
               process memory.  Set for pre-initialized code and data,
               clear for `.bss' sections.

         `RELOC'
               Section needs to be relocated before loading.

         `READONLY'
               Section cannot be modified by the child process.

         `CODE'
               Section contains executable code only.

         `DATA'
               Section contains data only (no executable code).

         `ROM'
               Section will reside in ROM.

         `CONSTRUCTOR'
               Section contains data for constructor/destructor lists.

         `HAS_CONTENTS'
               Section is not empty.

         `NEVER_LOAD'
               An instruction to the linker to not output the section.

         `COFF_SHARED_LIBRARY'
               A notification to the linker that the section contains
               COFF shared library information.

         `IS_COMMON'
               Section contains common symbols.
     
`set trust-readonly-sections on'
     Tell GDB that readonly sections in your object file really are
     read-only (i.e. that their contents will not change).  In that
     case, GDB can fetch values from these sections out of the object
     file, rather than from the target program.  For some targets
     (notably embedded ones), this can be a significant enhancement to
     debugging performance.

     The default is off.

`set trust-readonly-sections off'
     Tell GDB not to trust readonly sections.  This means that the
     contents of the section might change while the program is running,
     and must therefore be fetched from the target when needed.

`show trust-readonly-sections'
     Show the current setting of trusting readonly sections.

   All file-specifying commands allow both absolute and relative file
names as arguments.  GDB always converts the file name to an absolute
file name and remembers it that way.

   GDB supports GNU/Linux, MS-Windows, HP-UX, SunOS, SVr4, Irix, and
IBM RS/6000 AIX shared libraries.

   On MS-Windows GDB must be linked with the Expat library to support
shared libraries.  *Note Expat::.

   GDB automatically loads symbol definitions from shared libraries
when you use the `run' command, or when you examine a core file.
(Before you issue the `run' command, GDB does not understand references
to a function in a shared library, however--unless you are debugging a
core file).

   On HP-UX, if the program loads a library explicitly, GDB
automatically loads the symbols at the time of the `shl_load' call.

   There are times, however, when you may wish to not automatically load
symbol definitions from shared libraries, such as when they are
particularly large or there are many of them.

   To control the automatic loading of shared library symbols, use the
commands:

`set auto-solib-add MODE'
     If MODE is `on', symbols from all shared object libraries will be
     loaded automatically when the inferior begins execution, you
     attach to an independently started inferior, or when the dynamic
     linker informs GDB that a new library has been loaded.  If MODE is
     `off', symbols must be loaded manually, using the `sharedlibrary'
     command.  The default value is `on'.

     If your program uses lots of shared libraries with debug info that
     takes large amounts of memory, you can decrease the GDB memory
     footprint by preventing it from automatically loading the symbols
     from shared libraries.  To that end, type `set auto-solib-add off'
     before running the inferior, then load each library whose debug
     symbols you do need with `sharedlibrary REGEXP', where REGEXP is a
     regular expression that matches the libraries whose symbols you
     want to be loaded.

`show auto-solib-add'
     Display the current autoloading mode.

   To explicitly load shared library symbols, use the `sharedlibrary'
command:

`info share REGEX'
`info sharedlibrary REGEX'
     Print the names of the shared libraries which are currently loaded
     that match REGEX.  If REGEX is omitted then print all shared
     libraries that are loaded.

`sharedlibrary REGEX'
`share REGEX'
     Load shared object library symbols for files matching a Unix
     regular expression.  As with files loaded automatically, it only
     loads shared libraries required by your program for a core file or
     after typing `run'.  If REGEX is omitted all shared libraries
     required by your program are loaded.

`nosharedlibrary'
     Unload all shared object library symbols.  This discards all
     symbols that have been loaded from all shared libraries.  Symbols
     from shared libraries that were loaded by explicit user requests
     are not discarded.

   Sometimes you may wish that GDB stops and gives you control when any
of shared library events happen.  The best way to do this is to use
`catch load' and `catch unload' (*note Set Catchpoints::).

   GDB also supports the the `set stop-on-solib-events' command for
this.  This command exists for historical reasons.  It is less useful
than setting a catchpoint, because it does not allow for conditions or
commands as a catchpoint does.

`set stop-on-solib-events'
     This command controls whether GDB should give you control when the
     dynamic linker notifies it about some shared library event.  The
     most common event of interest is loading or unloading of a new
     shared library.

`show stop-on-solib-events'
     Show whether GDB stops and gives you control when shared library
     events happen.

   Shared libraries are also supported in many cross or remote debugging
configurations.  GDB needs to have access to the target's libraries;
this can be accomplished either by providing copies of the libraries on
the host system, or by asking GDB to automatically retrieve the
libraries from the target.  If copies of the target libraries are
provided, they need to be the same as the target libraries, although the
copies on the target can be stripped as long as the copies on the host
are not.

   For remote debugging, you need to tell GDB where the target
libraries are, so that it can load the correct copies--otherwise, it
may try to load the host's libraries.  GDB has two variables to specify
the search directories for target libraries.

`set sysroot PATH'
     Use PATH as the system root for the program being debugged.  Any
     absolute shared library paths will be prefixed with PATH; many
     runtime loaders store the absolute paths to the shared library in
     the target program's memory.  If you use `set sysroot' to find
     shared libraries, they need to be laid out in the same way that
     they are on the target, with e.g. a `/lib' and `/usr/lib' hierarchy
     under PATH.

     If PATH starts with the sequence `remote:', GDB will retrieve the
     target libraries from the remote system.  This is only supported
     when using a remote target that supports the `remote get' command
     (*note Sending files to a remote system: File Transfer.).  The
     part of PATH following the initial `remote:' (if present) is used
     as system root prefix on the remote file system.  (1)

     For targets with an MS-DOS based filesystem, such as MS-Windows and
     SymbianOS, GDB tries prefixing a few variants of the target
     absolute file name with PATH.  But first, on Unix hosts, GDB
     converts all backslash directory separators into forward slashes,
     because the backslash is not a directory separator on Unix:

            c:\foo\bar.dll => c:/foo/bar.dll

     Then, GDB attempts prefixing the target file name with PATH, and
     looks for the resulting file name in the host file system:

            c:/foo/bar.dll => /path/to/sysroot/c:/foo/bar.dll

     If that does not find the shared library, GDB tries removing the
     `:' character from the drive spec, both for convenience, and, for
     the case of the host file system not supporting file names with
     colons:

            c:/foo/bar.dll => /path/to/sysroot/c/foo/bar.dll

     This makes it possible to have a system root that mirrors a target
     with more than one drive.  E.g., you may want to setup your local
     copies of the target system shared libraries like so (note `c' vs
     `z'):

           `/path/to/sysroot/c/sys/bin/foo.dll'
           `/path/to/sysroot/c/sys/bin/bar.dll'
           `/path/to/sysroot/z/sys/bin/bar.dll'

     and point the system root at `/path/to/sysroot', so that GDB can
     find the correct copies of both `c:\sys\bin\foo.dll', and
     `z:\sys\bin\bar.dll'.

     If that still does not find the shared library, GDB tries removing
     the whole drive spec from the target file name:

            c:/foo/bar.dll => /path/to/sysroot/foo/bar.dll

     This last lookup makes it possible to not care about the drive
     name, if you don't want or need to.

     The `set solib-absolute-prefix' command is an alias for `set
     sysroot'.

     You can set the default system root by using the configure-time
     `--with-sysroot' option.  If the system root is inside GDB's
     configured binary prefix (set with `--prefix' or `--exec-prefix'),
     then the default system root will be updated automatically if the
     installed GDB is moved to a new location.

`show sysroot'
     Display the current shared library prefix.

`set solib-search-path PATH'
     If this variable is set, PATH is a colon-separated list of
     directories to search for shared libraries.  `solib-search-path'
     is used after `sysroot' fails to locate the library, or if the
     path to the library is relative instead of absolute.  If you want
     to use `solib-search-path' instead of `sysroot', be sure to set
     `sysroot' to a nonexistent directory to prevent GDB from finding
     your host's libraries.  `sysroot' is preferred; setting it to a
     nonexistent directory may interfere with automatic loading of
     shared library symbols.

`show solib-search-path'
     Display the current shared library search path.

`set target-file-system-kind KIND'
     Set assumed file system kind for target reported file names.

     Shared library file names as reported by the target system may not
     make sense as is on the system GDB is running on.  For example,
     when remote debugging a target that has MS-DOS based file system
     semantics, from a Unix host, the target may be reporting to GDB a
     list of loaded shared libraries with file names such as
     `c:\Windows\kernel32.dll'.  On Unix hosts, there's no concept of
     drive letters, so the `c:\' prefix is not normally understood as
     indicating an absolute file name, and neither is the backslash
     normally considered a directory separator character.  In that case,
     the native file system would interpret this whole absolute file
     name as a relative file name with no directory components.  This
     would make it impossible to point GDB at a copy of the remote
     target's shared libraries on the host using `set sysroot', and
     impractical with `set solib-search-path'.  Setting
     `target-file-system-kind' to `dos-based' tells GDB to interpret
     such file names similarly to how the target would, and to map them
     to file names valid on GDB's native file system semantics.  The
     value of KIND can be `"auto"', in addition to one of the supported
     file system kinds.  In that case, GDB tries to determine the
     appropriate file system variant based on the current target's
     operating system (*note Configuring the Current ABI: ABI.).  The
     supported file system settings are:

    `unix'
          Instruct GDB to assume the target file system is of Unix
          kind.  Only file names starting the forward slash (`/')
          character are considered absolute, and the directory
          separator character is also the forward slash.

    `dos-based'
          Instruct GDB to assume the target file system is DOS based.
          File names starting with either a forward slash, or a drive
          letter followed by a colon (e.g., `c:'), are considered
          absolute, and both the slash (`/') and the backslash (`\\')
          characters are considered directory separators.

    `auto'
          Instruct GDB to use the file system kind associated with the
          target operating system (*note Configuring the Current ABI:
          ABI.).  This is the default.

   When processing file names provided by the user, GDB frequently
needs to compare them to the file names recorded in the program's debug
info.  Normally, GDB compares just the "base names" of the files as
strings, which is reasonably fast even for very large programs.  (The
base name of a file is the last portion of its name, after stripping
all the leading directories.)  This shortcut in comparison is based
upon the assumption that files cannot have more than one base name.
This is usually true, but references to files that use symlinks or
similar filesystem facilities violate that assumption.  If your program
records files using such facilities, or if you provide file names to
GDB using symlinks etc., you can set `basenames-may-differ' to `true'
to instruct GDB to completely canonicalize each pair of file names it
needs to compare.  This will make file-name comparisons accurate, but
at a price of a significant slowdown.

`set basenames-may-differ'
     Set whether a source file may have multiple base names.

`show basenames-may-differ'
     Show whether a source file may have multiple base names.

   ---------- Footnotes ----------

   (1) If you want to specify a local system root using a directory
that happens to be named `remote:', you need to use some equivalent
variant of the name like `./remote:'.


File: gdb.info,  Node: Separate Debug Files,  Next: Index Files,  Prev: Files,  Up: GDB Files

18.2 Debugging Information in Separate Files
============================================

GDB allows you to put a program's debugging information in a file
separate from the executable itself, in a way that allows GDB to find
and load the debugging information automatically.  Since debugging
information can be very large--sometimes larger than the executable
code itself--some systems distribute debugging information for their
executables in separate files, which users can install only when they
need to debug a problem.

   GDB supports two ways of specifying the separate debug info file:

   * The executable contains a "debug link" that specifies the name of
     the separate debug info file.  The separate debug file's name is
     usually `EXECUTABLE.debug', where EXECUTABLE is the name of the
     corresponding executable file without leading directories (e.g.,
     `ls.debug' for `/usr/bin/ls').  In addition, the debug link
     specifies a 32-bit "Cyclic Redundancy Check" (CRC) checksum for
     the debug file, which GDB uses to validate that the executable and
     the debug file came from the same build.

   * The executable contains a "build ID", a unique bit string that is
     also present in the corresponding debug info file.  (This is
     supported only on some operating systems, notably those which use
     the ELF format for binary files and the GNU Binutils.)  For more
     details about this feature, see the description of the `--build-id'
     command-line option in *Note Command Line Options:
     (ld.info)Options.  The debug info file's name is not specified
     explicitly by the build ID, but can be computed from the build ID,
     see below.

   Depending on the way the debug info file is specified, GDB uses two
different methods of looking for the debug file:

   * For the "debug link" method, GDB looks up the named file in the
     directory of the executable file, then in a subdirectory of that
     directory named `.debug', and finally under each one of the global
     debug directories, in a subdirectory whose name is identical to
     the leading directories of the executable's absolute file name.

   * For the "build ID" method, GDB looks in the `.build-id'
     subdirectory of each one of the global debug directories for a
     file named `NN/NNNNNNNN.debug', where NN are the first 2 hex
     characters of the build ID bit string, and NNNNNNNN are the rest
     of the bit string.  (Real build ID strings are 32 or more hex
     characters, not 10.)

   So, for example, suppose you ask GDB to debug `/usr/bin/ls', which
has a debug link that specifies the file `ls.debug', and a build ID
whose value in hex is `abcdef1234'.  If the list of the global debug
directories includes `/usr/lib/debug', then GDB will look for the
following debug information files, in the indicated order:

   - `/usr/lib/debug/.build-id/ab/cdef1234.debug'

   - `/usr/bin/ls.debug'

   - `/usr/bin/.debug/ls.debug'

   - `/usr/lib/debug/usr/bin/ls.debug'.

   Global debugging info directories default to what is set by GDB
configure option `--with-separate-debug-dir'.  During GDB run you can
also set the global debugging info directories, and view the list GDB
is currently using.

`set debug-file-directory DIRECTORIES'
     Set the directories which GDB searches for separate debugging
     information files to DIRECTORY.  Multiple path components can be
     set concatenating them by a path separator.

`show debug-file-directory'
     Show the directories GDB searches for separate debugging
     information files.


   A debug link is a special section of the executable file named
`.gnu_debuglink'.  The section must contain:

   * A filename, with any leading directory components removed,
     followed by a zero byte,

   * zero to three bytes of padding, as needed to reach the next
     four-byte boundary within the section, and

   * a four-byte CRC checksum, stored in the same endianness used for
     the executable file itself.  The checksum is computed on the
     debugging information file's full contents by the function given
     below, passing zero as the CRC argument.

   Any executable file format can carry a debug link, as long as it can
contain a section named `.gnu_debuglink' with the contents described
above.

   The build ID is a special section in the executable file (and in
other ELF binary files that GDB may consider).  This section is often
named `.note.gnu.build-id', but that name is not mandatory.  It
contains unique identification for the built files--the ID remains the
same across multiple builds of the same build tree.  The default
algorithm SHA1 produces 160 bits (40 hexadecimal characters) of the
content for the build ID string.  The same section with an identical
value is present in the original built binary with symbols, in its
stripped variant, and in the separate debugging information file.

   The debugging information file itself should be an ordinary
executable, containing a full set of linker symbols, sections, and
debugging information.  The sections of the debugging information file
should have the same names, addresses, and sizes as the original file,
but they need not contain any data--much like a `.bss' section in an
ordinary executable.

   The GNU binary utilities (Binutils) package includes the `objcopy'
utility that can produce the separated executable / debugging
information file pairs using the following commands:

     objcopy --only-keep-debug foo foo.debug
     strip -g foo

These commands remove the debugging information from the executable
file `foo' and place it in the file `foo.debug'.  You can use the
first, second or both methods to link the two files:

   * The debug link method needs the following additional command to
     also leave behind a debug link in `foo':

          objcopy --add-gnu-debuglink=foo.debug foo

     Ulrich Drepper's `elfutils' package, starting with version 0.53,
     contains a version of the `strip' command such that the command
     `strip foo -f foo.debug' has the same functionality as the two
     `objcopy' commands and the `ln -s' command above, together.

   * Build ID gets embedded into the main executable using `ld
     --build-id' or the GCC counterpart `gcc -Wl,--build-id'.  Build ID
     support plus compatibility fixes for debug files separation are
     present in GNU binary utilities (Binutils) package since version
     2.18.

The CRC used in `.gnu_debuglink' is the CRC-32 defined in IEEE 802.3
using the polynomial:

      x^32 + x^26 + x^23 + x^22 + x^16 + x^12 + x^11
      + x^10 + x^8 + x^7 + x^5 + x^4 + x^2 + x + 1

   The function is computed byte at a time, taking the least
significant bit of each byte first.  The initial pattern `0xffffffff'
is used, to ensure leading zeros affect the CRC and the final result is
inverted to ensure trailing zeros also affect the CRC.

   _Note:_ This is the same CRC polynomial as used in handling the
"Remote Serial Protocol" `qCRC' packet (*note GDB Remote Serial
Protocol: Remote Protocol.).  However in the case of the Remote Serial
Protocol, the CRC is computed _most_ significant bit first, and the
result is not inverted, so trailing zeros have no effect on the CRC
value.

   To complete the description, we show below the code of the function
which produces the CRC used in `.gnu_debuglink'.  Inverting the
initially supplied `crc' argument means that an initial call to this
function passing in zero will start computing the CRC using
`0xffffffff'.

     unsigned long
     gnu_debuglink_crc32 (unsigned long crc,
                          unsigned char *buf, size_t len)
     {
       static const unsigned long crc32_table[256] =
         {
           0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419,
           0x706af48f, 0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4,
           0xe0d5e91e, 0x97d2d988, 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07,
           0x90bf1d91, 0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de,
           0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7, 0x136c9856,
           0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9,
           0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4,
           0xa2677172, 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b,
           0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940, 0x32d86ce3,
           0x45df5c75, 0xdcd60dcf, 0xabd13d59, 0x26d930ac, 0x51de003a,
           0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423, 0xcfba9599,
           0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
           0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190,
           0x01db7106, 0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f,
           0x9fbfe4a5, 0xe8b8d433, 0x7807c9a2, 0x0f00f934, 0x9609a88e,
           0xe10e9818, 0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01,
           0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e, 0x6c0695ed,
           0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950,
           0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3,
           0xfbd44c65, 0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2,
           0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a,
           0x346ed9fc, 0xad678846, 0xda60b8d0, 0x44042d73, 0x33031de5,
           0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa, 0xbe0b1010,
           0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
           0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17,
           0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6,
           0x03b6e20c, 0x74b1d29a, 0xead54739, 0x9dd277af, 0x04db2615,
           0x73dc1683, 0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8,
           0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1, 0xf00f9344,
           0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb,
           0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a,
           0x67dd4acc, 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5,
           0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252, 0xd1bb67f1,
           0xa6bc5767, 0x3fb506dd, 0x48b2364b, 0xd80d2bda, 0xaf0a1b4c,
           0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55, 0x316e8eef,
           0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
           0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe,
           0xb2bd0b28, 0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31,
           0x2cd99e8b, 0x5bdeae1d, 0x9b64c2b0, 0xec63f226, 0x756aa39c,
           0x026d930a, 0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713,
           0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38, 0x92d28e9b,
           0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242,
           0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1,
           0x18b74777, 0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c,
           0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45, 0xa00ae278,
           0xd70dd2ee, 0x4e048354, 0x3903b3c2, 0xa7672661, 0xd06016f7,
           0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc, 0x40df0b66,
           0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
           0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605,
           0xcdd70693, 0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8,
           0x5d681b02, 0x2a6f2b94, 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b,
           0x2d02ef8d
         };
       unsigned char *end;

       crc = ~crc & 0xffffffff;
       for (end = buf + len; buf < end; ++buf)
         crc = crc32_table[(crc ^ *buf) & 0xff] ^ (crc >> 8);
       return ~crc & 0xffffffff;
     }

This computation does not apply to the "build ID" method.


File: gdb.info,  Node: Index Files,  Next: Symbol Errors,  Prev: Separate Debug Files,  Up: GDB Files

18.3 Index Files Speed Up GDB
=============================

When GDB finds a symbol file, it scans the symbols in the file in order
to construct an internal symbol table.  This lets most GDB operations
work quickly--at the cost of a delay early on.  For large programs,
this delay can be quite lengthy, so GDB provides a way to build an
index, which speeds up startup.

   The index is stored as a section in the symbol file.  GDB can write
the index to a file, then you can put it into the symbol file using
`objcopy'.

   To create an index file, use the `save gdb-index' command:

`save gdb-index DIRECTORY'
     Create an index file for each symbol file currently known by GDB.
     Each file is named after its corresponding symbol file, with
     `.gdb-index' appended, and is written into the given DIRECTORY.

   Once you have created an index file you can merge it into your symbol
file, here named `symfile', using `objcopy':

     $ objcopy --add-section .gdb_index=symfile.gdb-index \
         --set-section-flags .gdb_index=readonly symfile symfile

   GDB will normally ignore older versions of `.gdb_index' sections
that have been deprecated.  Usually they are deprecated because they
are missing a new feature or have performance issues.  To tell GDB to
use a deprecated index section anyway specify `set
use-deprecated-index-sections on'.  The default is `off'.  This can
speed up startup, but may result in some functionality being lost.
*Note Index Section Format::.

   _Warning:_ Setting `use-deprecated-index-sections' to `on' must be
done before gdb reads the file.  The following will not work:

     $ gdb -ex "set use-deprecated-index-sections on" <program>

   Instead you must do, for example,

     $ gdb -iex "set use-deprecated-index-sections on" <program>

   There are currently some limitation on indices.  They only work when
for DWARF debugging information, not stabs.  And, they do not currently
work for programs using Ada.