| # Simplified Chinese translation for opcode. |
| # Copyright (C) 2005 Free Software Foundation, Inc. |
| # This file is distributed under the same license as the binutils package. |
| # Meng Jie <zuxyhere@eastday.com>, 2005. |
| # |
| msgid "" |
| msgstr "" |
| "Project-Id-Version: opcodes 2.15.96\n" |
| "Report-Msgid-Bugs-To: \n" |
| "POT-Creation-Date: 2005-03-05 20:32+1030\n" |
| "PO-Revision-Date: 2006-01-15 02:10+0800\n" |
| "Last-Translator: Meng Jie <zuxyhere@eastday.com>\n" |
| "Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n" |
| "MIME-Version: 1.0\n" |
| "Content-Type: text/plain; charset=utf-8\n" |
| "Content-Transfer-Encoding: 8bit\n" |
| |
| #: alpha-opc.c:331 |
| msgid "branch operand unaligned" |
| msgstr "分支操作数未对齐" |
| |
| #: alpha-opc.c:353 alpha-opc.c:374 |
| msgid "jump hint unaligned" |
| msgstr "跳转提示未对齐" |
| |
| #: arc-dis.c:76 |
| msgid "Illegal limm reference in last instruction!\n" |
| msgstr "" |
| |
| #: arm-dis.c:1267 |
| msgid "<illegal precision>" |
| msgstr "<非法的精度>" |
| |
| #. XXX - should break 'option' at following delimiter. |
| #: arm-dis.c:1912 |
| #, c-format |
| msgid "Unrecognised register name set: %s\n" |
| msgstr "无法识别的寄存器名称集:%s\n" |
| |
| #. XXX - should break 'option' at following delimiter. |
| #: arm-dis.c:1920 |
| #, c-format |
| msgid "Unrecognised disassembler option: %s\n" |
| msgstr "无法识别的反汇编器选项:%s\n" |
| |
| #: arm-dis.c:2093 |
| #, c-format |
| msgid "" |
| "\n" |
| "The following ARM specific disassembler options are supported for use with\n" |
| "the -M switch:\n" |
| msgstr "" |
| "\n" |
| "下列 ARM 特定的反汇编器选项在使用 -M 开关时可用:\n" |
| |
| #: avr-dis.c:112 avr-dis.c:122 |
| #, c-format |
| msgid "undefined" |
| msgstr "未定义" |
| |
| #: avr-dis.c:179 |
| #, c-format |
| msgid "Internal disassembler error" |
| msgstr "反汇编器内部错误" |
| |
| #: avr-dis.c:227 |
| #, c-format |
| msgid "unknown constraint `%c'" |
| msgstr "未知的约束‘%c’" |
| |
| #: cgen-asm.c:336 fr30-ibld.c:197 frv-ibld.c:197 ip2k-ibld.c:197 |
| #: iq2000-ibld.c:197 m32r-ibld.c:197 openrisc-ibld.c:197 xstormy16-ibld.c:197 |
| #, c-format |
| msgid "operand out of range (%ld not between %ld and %ld)" |
| msgstr "操作数越界(%ld 不在 %ld 和 %ld 之间)" |
| |
| #: cgen-asm.c:358 |
| #, c-format |
| msgid "operand out of range (%lu not between %lu and %lu)" |
| msgstr "操作数越界(%lu 不在 %lu 和 %lu 之间)" |
| |
| #: d30v-dis.c:312 |
| #, c-format |
| msgid "<unknown register %d>" |
| msgstr "<未知的寄存器 %d>" |
| |
| #. Can't happen. |
| #: dis-buf.c:57 |
| #, c-format |
| msgid "Unknown error %d\n" |
| msgstr "未知错误 %d\n" |
| |
| #: dis-buf.c:66 |
| #, c-format |
| msgid "Address 0x%s is out of bounds.\n" |
| msgstr "地址 0x%s 越界。\n" |
| |
| #: fr30-asm.c:323 frv-asm.c:1298 ip2k-asm.c:530 iq2000-asm.c:465 |
| #: m32r-asm.c:338 openrisc-asm.c:252 xstormy16-asm.c:284 |
| #, fuzzy, c-format |
| msgid "Unrecognized field %d while parsing.\n" |
| msgstr "词法分析字段时出错\n" |
| |
| #: fr30-asm.c:372 frv-asm.c:1347 ip2k-asm.c:579 iq2000-asm.c:514 |
| #: m32r-asm.c:387 openrisc-asm.c:301 xstormy16-asm.c:333 |
| msgid "missing mnemonic in syntax string" |
| msgstr "语法字符串中没有助记符" |
| |
| #. We couldn't parse it. |
| #: fr30-asm.c:507 fr30-asm.c:511 fr30-asm.c:598 fr30-asm.c:699 frv-asm.c:1482 |
| #: frv-asm.c:1486 frv-asm.c:1573 frv-asm.c:1674 ip2k-asm.c:714 ip2k-asm.c:718 |
| #: ip2k-asm.c:805 ip2k-asm.c:906 iq2000-asm.c:649 iq2000-asm.c:653 |
| #: iq2000-asm.c:740 iq2000-asm.c:841 m32r-asm.c:522 m32r-asm.c:526 |
| #: m32r-asm.c:613 m32r-asm.c:714 openrisc-asm.c:436 openrisc-asm.c:440 |
| #: openrisc-asm.c:527 openrisc-asm.c:628 xstormy16-asm.c:468 |
| #: xstormy16-asm.c:472 xstormy16-asm.c:559 xstormy16-asm.c:660 |
| msgid "unrecognized instruction" |
| msgstr "无法识别的指令" |
| |
| #: fr30-asm.c:554 frv-asm.c:1529 ip2k-asm.c:761 iq2000-asm.c:696 |
| #: m32r-asm.c:569 openrisc-asm.c:483 xstormy16-asm.c:515 |
| #, c-format |
| msgid "syntax error (expected char `%c', found `%c')" |
| msgstr "语法错误(需要字符‘%c’,得到‘%c’)" |
| |
| #: fr30-asm.c:564 frv-asm.c:1539 ip2k-asm.c:771 iq2000-asm.c:706 |
| #: m32r-asm.c:579 openrisc-asm.c:493 xstormy16-asm.c:525 |
| #, c-format |
| msgid "syntax error (expected char `%c', found end of instruction)" |
| msgstr "语法错误(需要字符‘%c’,却到达指令尾)" |
| |
| #: fr30-asm.c:592 frv-asm.c:1567 ip2k-asm.c:799 iq2000-asm.c:734 |
| #: m32r-asm.c:607 openrisc-asm.c:521 xstormy16-asm.c:553 |
| msgid "junk at end of line" |
| msgstr "行尾有垃圾字符" |
| |
| #: fr30-asm.c:698 frv-asm.c:1673 ip2k-asm.c:905 iq2000-asm.c:840 |
| #: m32r-asm.c:713 openrisc-asm.c:627 xstormy16-asm.c:659 |
| msgid "unrecognized form of instruction" |
| msgstr "无法识别的指令格式" |
| |
| #: fr30-asm.c:710 frv-asm.c:1685 ip2k-asm.c:917 iq2000-asm.c:852 |
| #: m32r-asm.c:725 openrisc-asm.c:639 xstormy16-asm.c:671 |
| #, c-format |
| msgid "bad instruction `%.50s...'" |
| msgstr "错误的指令‘%.50s...’" |
| |
| #: fr30-asm.c:713 frv-asm.c:1688 ip2k-asm.c:920 iq2000-asm.c:855 |
| #: m32r-asm.c:728 openrisc-asm.c:642 xstormy16-asm.c:674 |
| #, c-format |
| msgid "bad instruction `%.50s'" |
| msgstr "错误的指令‘%.50s’" |
| |
| #. Default text to print if an instruction isn't recognized. |
| #: fr30-dis.c:41 frv-dis.c:41 ip2k-dis.c:41 iq2000-dis.c:41 m32r-dis.c:41 |
| #: mmix-dis.c:284 openrisc-dis.c:41 xstormy16-dis.c:41 |
| msgid "*unknown*" |
| msgstr "*未知*" |
| |
| #: fr30-dis.c:319 frv-dis.c:410 ip2k-dis.c:313 iq2000-dis.c:191 m32r-dis.c:262 |
| #: openrisc-dis.c:137 xstormy16-dis.c:170 |
| #, c-format |
| msgid "Unrecognized field %d while printing insn.\n" |
| msgstr "" |
| |
| #: fr30-ibld.c:168 frv-ibld.c:168 ip2k-ibld.c:168 iq2000-ibld.c:168 |
| #: m32r-ibld.c:168 openrisc-ibld.c:168 xstormy16-ibld.c:168 |
| #, c-format |
| msgid "operand out of range (%ld not between %ld and %lu)" |
| msgstr "操作数越界(%ld 不在 %ld 和 %lu 之间)" |
| |
| #: fr30-ibld.c:181 frv-ibld.c:181 ip2k-ibld.c:181 iq2000-ibld.c:181 |
| #: m32r-ibld.c:181 openrisc-ibld.c:181 xstormy16-ibld.c:181 |
| #, c-format |
| msgid "operand out of range (%lu not between 0 and %lu)" |
| msgstr "操作数越界(%lu 不在 0 和 %lu 之间)" |
| |
| #: fr30-ibld.c:732 frv-ibld.c:858 ip2k-ibld.c:609 iq2000-ibld.c:715 |
| #: m32r-ibld.c:667 openrisc-ibld.c:635 xstormy16-ibld.c:680 |
| #, c-format |
| msgid "Unrecognized field %d while building insn.\n" |
| msgstr "" |
| |
| #: fr30-ibld.c:939 frv-ibld.c:1177 ip2k-ibld.c:686 iq2000-ibld.c:892 |
| #: m32r-ibld.c:806 openrisc-ibld.c:737 xstormy16-ibld.c:828 |
| #, c-format |
| msgid "Unrecognized field %d while decoding insn.\n" |
| msgstr "" |
| |
| #: fr30-ibld.c:1088 frv-ibld.c:1458 ip2k-ibld.c:763 iq2000-ibld.c:1026 |
| #: m32r-ibld.c:922 openrisc-ibld.c:817 xstormy16-ibld.c:941 |
| #, c-format |
| msgid "Unrecognized field %d while getting int operand.\n" |
| msgstr "" |
| |
| #: fr30-ibld.c:1217 frv-ibld.c:1719 ip2k-ibld.c:820 iq2000-ibld.c:1140 |
| #: m32r-ibld.c:1018 openrisc-ibld.c:877 xstormy16-ibld.c:1034 |
| #, c-format |
| msgid "Unrecognized field %d while getting vma operand.\n" |
| msgstr "" |
| |
| #: fr30-ibld.c:1351 frv-ibld.c:1989 ip2k-ibld.c:882 iq2000-ibld.c:1263 |
| #: m32r-ibld.c:1122 openrisc-ibld.c:946 xstormy16-ibld.c:1136 |
| #, c-format |
| msgid "Unrecognized field %d while setting int operand.\n" |
| msgstr "" |
| |
| #: fr30-ibld.c:1473 frv-ibld.c:2247 ip2k-ibld.c:932 iq2000-ibld.c:1374 |
| #: m32r-ibld.c:1214 openrisc-ibld.c:1003 xstormy16-ibld.c:1226 |
| #, c-format |
| msgid "Unrecognized field %d while setting vma operand.\n" |
| msgstr "" |
| |
| #: frv-asm.c:978 |
| msgid "register number must be even" |
| msgstr "寄存器数必须是偶数" |
| |
| #: h8300-dis.c:358 |
| #, c-format |
| msgid "Hmmmm 0x%x" |
| msgstr "Hmmmm 0x%x" |
| |
| #: h8300-dis.c:744 |
| #, fuzzy, c-format |
| msgid "Don't understand 0x%x \n" |
| msgstr "不理解类型“%s”\n" |
| |
| #: h8500-dis.c:143 |
| #, fuzzy, c-format |
| msgid "can't cope with insert %d\n" |
| msgstr "用下列通配符插入文件(&M):" |
| |
| #. Couldn't understand anything. |
| #: h8500-dis.c:342 |
| #, c-format |
| msgid "%02x\t\t*unknown*" |
| msgstr "%02x\t\t*未知*" |
| |
| #: i386-dis.c:1733 |
| msgid "<internal disassembler error>" |
| msgstr "<反汇编器内部错误>" |
| |
| #: ia64-gen.c:297 |
| #, c-format |
| msgid "%s: Error: " |
| msgstr "%s:错误:" |
| |
| #: ia64-gen.c:310 |
| #, c-format |
| msgid "%s: Warning: " |
| msgstr "%s:警告:" |
| |
| #: ia64-gen.c:496 ia64-gen.c:730 |
| #, fuzzy, c-format |
| msgid "multiple note %s not handled\n" |
| msgstr "未处理 move 指令" |
| |
| #: ia64-gen.c:607 |
| msgid "can't find ia64-ic.tbl for reading\n" |
| msgstr "" |
| |
| #: ia64-gen.c:812 |
| #, fuzzy, c-format |
| msgid "can't find %s for reading\n" |
| msgstr "无法打开 %1 进行读取" |
| |
| #: ia64-gen.c:1036 |
| #, c-format |
| msgid "" |
| "most recent format '%s'\n" |
| "appears more restrictive than '%s'\n" |
| msgstr "" |
| |
| #: ia64-gen.c:1047 |
| #, fuzzy, c-format |
| msgid "overlapping field %s->%s\n" |
| msgstr "域宽" |
| |
| #: ia64-gen.c:1244 |
| #, c-format |
| msgid "overwriting note %d with note %d (IC:%s)\n" |
| msgstr "" |
| |
| #: ia64-gen.c:1443 |
| #, c-format |
| msgid "don't know how to specify %% dependency %s\n" |
| msgstr "不知道如何指定 %% 依赖 %s\n" |
| |
| #: ia64-gen.c:1465 |
| #, c-format |
| msgid "Don't know how to specify # dependency %s\n" |
| msgstr "不知道如何指定 # 依赖 %s\n" |
| |
| #: ia64-gen.c:1504 |
| #, c-format |
| msgid "IC:%s [%s] has no terminals or sub-classes\n" |
| msgstr "" |
| |
| #: ia64-gen.c:1507 |
| #, c-format |
| msgid "IC:%s has no terminals or sub-classes\n" |
| msgstr "" |
| |
| #: ia64-gen.c:1516 |
| #, c-format |
| msgid "no insns mapped directly to terminal IC %s [%s]" |
| msgstr "" |
| |
| #: ia64-gen.c:1519 |
| #, c-format |
| msgid "no insns mapped directly to terminal IC %s\n" |
| msgstr "" |
| |
| #: ia64-gen.c:1530 |
| #, c-format |
| msgid "class %s is defined but not used\n" |
| msgstr "" |
| |
| #: ia64-gen.c:1541 |
| #, c-format |
| msgid "Warning: rsrc %s (%s) has no chks%s\n" |
| msgstr "" |
| |
| #: ia64-gen.c:1545 |
| #, fuzzy, c-format |
| msgid "rsrc %s (%s) has no regs\n" |
| msgstr "指数部分没有数字" |
| |
| #: ia64-gen.c:2444 |
| #, c-format |
| msgid "IC note %d in opcode %s (IC:%s) conflicts with resource %s note %d\n" |
| msgstr "" |
| |
| #: ia64-gen.c:2472 |
| #, c-format |
| msgid "IC note %d for opcode %s (IC:%s) conflicts with resource %s note %d\n" |
| msgstr "" |
| |
| #: ia64-gen.c:2486 |
| #, fuzzy, c-format |
| msgid "opcode %s has no class (ops %d %d %d)\n" |
| msgstr "尚未定义名为“%s”的 <draw_ops>" |
| |
| #: ia64-gen.c:2816 |
| #, c-format |
| msgid "unable to change directory to \"%s\", errno = %s\n" |
| msgstr "无法将当前目录切换至“%s”,errno = %s\n" |
| |
| #. We've been passed a w. Return with an error message so that |
| #. cgen will try the next parsing option. |
| #: ip2k-asm.c:92 |
| msgid "W keyword invalid in FR operand slot." |
| msgstr "" |
| |
| #. Invalid offset present. |
| #: ip2k-asm.c:117 |
| msgid "offset(IP) is not a valid form" |
| msgstr "" |
| |
| #. Found something there in front of (DP) but it's out |
| #. of range. |
| #: ip2k-asm.c:165 |
| msgid "(DP) offset out of range." |
| msgstr "(DP) 偏移量越界" |
| |
| #. Found something there in front of (SP) but it's out |
| #. of range. |
| #: ip2k-asm.c:206 |
| msgid "(SP) offset out of range." |
| msgstr "(SP) 偏移量越界。" |
| |
| #: ip2k-asm.c:222 |
| msgid "illegal use of parentheses" |
| msgstr "括号的使用非法" |
| |
| #: ip2k-asm.c:229 |
| #, fuzzy |
| msgid "operand out of range (not between 1 and 255)" |
| msgstr "操作数越界(%lu 不在 0 和 %lu 之间)" |
| |
| #. Something is very wrong. opindex has to be one of the above. |
| #: ip2k-asm.c:254 |
| #, fuzzy |
| msgid "parse_addr16: invalid opindex." |
| msgstr "分析错误:非法 UTF-8 序列" |
| |
| #: ip2k-asm.c:309 |
| msgid "Byte address required. - must be even." |
| msgstr "" |
| |
| #: ip2k-asm.c:318 |
| msgid "cgen_parse_address returned a symbol. Literal required." |
| msgstr "" |
| |
| #: ip2k-asm.c:376 |
| #, fuzzy, c-format |
| msgid "%operator operand is not a symbol" |
| msgstr "使用寄存器栈传递参数和返回值" |
| |
| #: ip2k-asm.c:430 |
| msgid "Attempt to find bit index of 0" |
| msgstr "" |
| |
| #: iq2000-asm.c:115 iq2000-asm.c:146 |
| msgid "immediate value cannot be register" |
| msgstr "立即数不能是寄存器" |
| |
| #: iq2000-asm.c:126 iq2000-asm.c:156 |
| msgid "immediate value out of range" |
| msgstr "立即数越界" |
| |
| #: iq2000-asm.c:185 |
| msgid "21-bit offset out of range" |
| msgstr "21位长的偏移量越界" |
| |
| #: iq2000-asm.c:210 iq2000-asm.c:240 iq2000-asm.c:277 iq2000-asm.c:310 |
| #: openrisc-asm.c:90 openrisc-asm.c:144 |
| msgid "missing `)'" |
| msgstr "缺少‘)’" |
| |
| #: m10200-dis.c:199 |
| #, c-format |
| msgid "unknown\t0x%02x" |
| msgstr "未知\t0x%02x" |
| |
| #: m10200-dis.c:339 |
| #, c-format |
| msgid "unknown\t0x%04lx" |
| msgstr "未知\t0x%04lx" |
| |
| #: m10300-dis.c:767 |
| #, c-format |
| msgid "unknown\t0x%04x" |
| msgstr "未知\t0x%04x" |
| |
| #: m68k-dis.c:295 |
| #, c-format |
| msgid "<internal error in opcode table: %s %s>\n" |
| msgstr "<操作数表中出现内部错误:%s %s>\n" |
| |
| #: m68k-dis.c:1089 |
| #, c-format |
| msgid "<function code %d>" |
| msgstr "<函数代码 %d>" |
| |
| #: m88k-dis.c:746 |
| #, fuzzy, c-format |
| msgid "# <dis error: %08x>" |
| msgstr "语法错误,非预期的 %s" |
| |
| #: mips-dis.c:720 |
| msgid "# internal error, incomplete extension sequence (+)" |
| msgstr "" |
| |
| #: mips-dis.c:779 |
| #, c-format |
| msgid "# internal error, undefined extension sequence (+%c)" |
| msgstr "" |
| |
| #: mips-dis.c:1037 |
| #, c-format |
| msgid "# internal error, undefined modifier(%c)" |
| msgstr "# 内部错误,未定义的修饰符(%c)" |
| |
| #: mips-dis.c:1793 |
| #, c-format |
| msgid "# internal disassembler error, unrecognised modifier (%c)" |
| msgstr "" |
| |
| #: mips-dis.c:1805 |
| #, c-format |
| msgid "" |
| "\n" |
| "The following MIPS specific disassembler options are supported for use\n" |
| "with the -M switch (multiple options should be separated by commas):\n" |
| msgstr "" |
| |
| #: mips-dis.c:1809 |
| #, c-format |
| msgid "" |
| "\n" |
| " gpr-names=ABI Print GPR names according to specified ABI.\n" |
| " Default: based on binary being disassembled.\n" |
| msgstr "" |
| "\n" |
| " gpr-names=ABI 根据指定的 ABI 打印通用寄存器名。\n" |
| " 默认:根据被反汇编的二进制文件。\n" |
| |
| #: mips-dis.c:1813 |
| #, c-format |
| msgid "" |
| "\n" |
| " fpr-names=ABI Print FPR names according to specified ABI.\n" |
| " Default: numeric.\n" |
| msgstr "" |
| "\n" |
| " fpr-names=ABI 根据指定的 ABI 打印浮点寄存器名。\n" |
| " 默认:数字。\n" |
| |
| #: mips-dis.c:1817 |
| #, c-format |
| msgid "" |
| "\n" |
| " cp0-names=ARCH Print CP0 register names according to\n" |
| " specified architecture.\n" |
| " Default: based on binary being disassembled.\n" |
| msgstr "" |
| "\n" |
| " cp0-names=ARCH 根据指定的架构打印 CP0 寄存器名。\n" |
| " 默认:根据被反汇编的二进制代码。\n" |
| |
| #: mips-dis.c:1822 |
| #, c-format |
| msgid "" |
| "\n" |
| " hwr-names=ARCH Print HWR names according to specified \n" |
| "\t\t\t architecture.\n" |
| " Default: based on binary being disassembled.\n" |
| msgstr "" |
| "\n" |
| " hwr-names=ARCH 根据指定的架构打印 HWR 寄存器名。\n" |
| " 默认:根据被反汇编的二进制代码。\n" |
| |
| #: mips-dis.c:1827 |
| #, c-format |
| msgid "" |
| "\n" |
| " reg-names=ABI Print GPR and FPR names according to\n" |
| " specified ABI.\n" |
| msgstr "" |
| "\n" |
| " reg-names=ABI 根据指定的 ABI 打印通用寄存器和浮点寄存\n" |
| " 器名。\n" |
| |
| #: mips-dis.c:1831 |
| #, c-format |
| msgid "" |
| "\n" |
| " reg-names=ARCH Print CP0 register and HWR names according to\n" |
| " specified architecture.\n" |
| msgstr "" |
| "\n" |
| " reg-names=ARCH 根据指定的架构打印 CP0 和 HWR 寄存器名。\n" |
| |
| #: mips-dis.c:1835 |
| #, c-format |
| msgid "" |
| "\n" |
| " For the options above, the following values are supported for \"ABI\":\n" |
| " " |
| msgstr "" |
| |
| #: mips-dis.c:1840 mips-dis.c:1848 mips-dis.c:1850 |
| #, c-format |
| msgid "\n" |
| msgstr "\n" |
| |
| #: mips-dis.c:1842 |
| #, c-format |
| msgid "" |
| "\n" |
| " For the options above, The following values are supported for \"ARCH\":\n" |
| " " |
| msgstr "" |
| |
| #: mmix-dis.c:34 |
| #, fuzzy, c-format |
| msgid "Bad case %d (%s) in %s:%d\n" |
| msgstr "忽略大小写变化(&I)" |
| |
| #: mmix-dis.c:44 |
| #, c-format |
| msgid "Internal: Non-debugged code (test-case missing): %s:%d" |
| msgstr "" |
| |
| #: mmix-dis.c:53 |
| msgid "(unknown)" |
| msgstr "(未知)" |
| |
| #: mmix-dis.c:519 |
| #, fuzzy, c-format |
| msgid "*unknown operands type: %d*" |
| msgstr "未知的签名类型‘%s’\n" |
| |
| #. I and Z are output operands and can`t be immediate |
| #. * A is an address and we can`t have the address of |
| #. * an immediate either. We don't know how much to increase |
| #. * aoffsetp by since whatever generated this is broken |
| #. * anyway! |
| #. |
| #: ns32k-dis.c:631 |
| #, c-format |
| msgid "$<undefined>" |
| msgstr "$<未定义>" |
| |
| #: ppc-opc.c:794 ppc-opc.c:822 |
| msgid "invalid conditional option" |
| msgstr "无效的条件选项" |
| |
| #: ppc-opc.c:824 |
| msgid "attempt to set y bit when using + or - modifier" |
| msgstr "" |
| |
| #: ppc-opc.c:852 |
| msgid "offset not a multiple of 16" |
| msgstr "偏移量不是 16 的倍数" |
| |
| #: ppc-opc.c:871 |
| msgid "offset not a multiple of 2" |
| msgstr "偏移量不是 2 的倍数" |
| |
| #: ppc-opc.c:873 |
| msgid "offset greater than 62" |
| msgstr "偏移量大于 62" |
| |
| #: ppc-opc.c:892 ppc-opc.c:937 ppc-opc.c:981 |
| msgid "offset not a multiple of 4" |
| msgstr "偏移量不是 4 的倍数" |
| |
| #: ppc-opc.c:894 |
| msgid "offset greater than 124" |
| msgstr "偏移量大于 124" |
| |
| #: ppc-opc.c:913 |
| msgid "offset not a multiple of 8" |
| msgstr "偏移量不是 8 的倍数" |
| |
| #: ppc-opc.c:915 |
| msgid "offset greater than 248" |
| msgstr "偏移量大于 248" |
| |
| #: ppc-opc.c:958 |
| msgid "offset not between -2048 and 2047" |
| msgstr "偏移量不在 -2048 和 2047 之间" |
| |
| #: ppc-opc.c:979 |
| msgid "offset not between -8192 and 8191" |
| msgstr "偏移量不在 -8192 和 8191 之间" |
| |
| #: ppc-opc.c:1007 |
| msgid "invalid mask field" |
| msgstr "无效的掩码字段" |
| |
| #: ppc-opc.c:1033 |
| #, fuzzy |
| msgid "ignoring invalid mfcr mask" |
| msgstr "忽略 schema 名称“%s”,无效:%s" |
| |
| #: ppc-opc.c:1075 |
| msgid "ignoring least significant bits in branch offset" |
| msgstr "" |
| |
| #: ppc-opc.c:1105 ppc-opc.c:1140 |
| msgid "illegal bitmask" |
| msgstr "非法的位掩码" |
| |
| #: ppc-opc.c:1205 |
| msgid "value out of range" |
| msgstr "值越界" |
| |
| #: ppc-opc.c:1273 |
| #, fuzzy |
| msgid "index register in load range" |
| msgstr "初始值设定项中索引范围为空" |
| |
| #: ppc-opc.c:1289 |
| msgid "source and target register operands must be different" |
| msgstr "" |
| |
| #: ppc-opc.c:1304 |
| msgid "invalid register operand when updating" |
| msgstr "" |
| |
| #: ppc-opc.c:1343 |
| msgid "target register operand must be even" |
| msgstr "目的寄存器操作数必须是偶数" |
| |
| #: ppc-opc.c:1357 |
| msgid "source register operand must be even" |
| msgstr "源寄存器操作数必须是偶数" |
| |
| #. Mark as non-valid instruction. |
| #: sparc-dis.c:760 |
| msgid "unknown" |
| msgstr "未知" |
| |
| #: sparc-dis.c:835 |
| #, c-format |
| msgid "Internal error: bad sparc-opcode.h: \"%s\", %#.8lx, %#.8lx\n" |
| msgstr "内部错误:错误的 sparc-opcode.h:“%s”,%#.8lx,%#.8lx\n" |
| |
| #: sparc-dis.c:846 |
| #, c-format |
| msgid "Internal error: bad sparc-opcode.h: \"%s\", %#.8lx, %#.8lx\n" |
| msgstr "内部错误:错误的 sparc-opcode.h:“%s”,%#.8lx,%#.8lx\n" |
| |
| #: sparc-dis.c:895 |
| #, fuzzy, c-format |
| msgid "Internal error: bad sparc-opcode.h: \"%s\" == \"%s\"\n" |
| msgstr "内部错误:错误的 sparc-opcode.h:“%s”,%#.8lx,%#.8lx\n" |
| |
| #: v850-dis.c:225 |
| #, fuzzy, c-format |
| msgid "unknown operand shift: %x\n" |
| msgstr "PRINT_OPERAND:未知的标点‘%c’" |
| |
| #: v850-dis.c:237 |
| #, c-format |
| msgid "unknown pop reg: %d\n" |
| msgstr "未知的弹栈寄存器:%d\n" |
| |
| #. The functions used to insert and extract complicated operands. |
| #. Note: There is a conspiracy between these functions and |
| #. v850_insert_operand() in gas/config/tc-v850.c. Error messages |
| #. containing the string 'out of range' will be ignored unless a |
| #. specific command line option is given to GAS. |
| #: v850-opc.c:69 |
| msgid "displacement value is not in range and is not aligned" |
| msgstr "" |
| |
| #: v850-opc.c:70 |
| msgid "displacement value is out of range" |
| msgstr "偏移值越界" |
| |
| #: v850-opc.c:71 |
| msgid "displacement value is not aligned" |
| msgstr "偏移值未对齐" |
| |
| #: v850-opc.c:73 |
| msgid "immediate value is out of range" |
| msgstr "立即数越界" |
| |
| #: v850-opc.c:84 |
| msgid "branch value not in range and to odd offset" |
| msgstr "跳转越界且跳转偏移量为奇数" |
| |
| #: v850-opc.c:86 v850-opc.c:118 |
| msgid "branch value out of range" |
| msgstr "跳转越界" |
| |
| #: v850-opc.c:89 v850-opc.c:121 |
| msgid "branch to odd offset" |
| msgstr "跳转偏移量为奇数" |
| |
| #: v850-opc.c:116 |
| msgid "branch value not in range and to an odd offset" |
| msgstr "跳转越界且跳转偏移量为奇数" |
| |
| #: v850-opc.c:347 |
| msgid "invalid register for stack adjustment" |
| msgstr "用于调整堆栈的寄存器无效" |
| |
| #: v850-opc.c:371 |
| msgid "immediate value not in range and not even" |
| msgstr "立即数越界且不是偶数" |
| |
| #: v850-opc.c:376 |
| msgid "immediate value must be even" |
| msgstr "必须给出立即数" |
| |
| #: xstormy16-asm.c:76 |
| msgid "Bad register in preincrement" |
| msgstr "前置自增中使用了错误的寄存器" |
| |
| #: xstormy16-asm.c:81 |
| msgid "Bad register in postincrement" |
| msgstr "后置自增中使用了错误的寄存器" |
| |
| #: xstormy16-asm.c:83 |
| msgid "Bad register name" |
| msgstr "错误的寄存器名" |
| |
| #: xstormy16-asm.c:87 |
| msgid "Label conflicts with register name" |
| msgstr "标号与寄存器名冲突" |
| |
| #: xstormy16-asm.c:91 |
| msgid "Label conflicts with `Rx'" |
| msgstr "标号与‘Rx’冲突" |
| |
| #: xstormy16-asm.c:93 |
| msgid "Bad immediate expression" |
| msgstr "错误的立即数表达式" |
| |
| #: xstormy16-asm.c:115 |
| msgid "No relocation for small immediate" |
| msgstr "" |
| |
| #: xstormy16-asm.c:125 |
| msgid "Small operand was not an immediate number" |
| msgstr "" |
| |
| #: xstormy16-asm.c:164 |
| msgid "Operand is not a symbol" |
| msgstr "操作数不是一个符号" |
| |
| #: xstormy16-asm.c:172 |
| msgid "Syntax error: No trailing ')'" |
| msgstr "语法错误:没有结尾的‘)’" |