| # Copyright 1999-2004, 2007-2012 Free Software Foundation, Inc. |
| |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 3 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program. If not, see <http://www.gnu.org/licenses/>. |
| |
| # This file was written by Elena Zannoni (ezannoni@cygnus.com) |
| |
| |
| # |
| # test running programs |
| # |
| |
| if { [skip_cplus_tests] } { continue } |
| |
| standard_testfile .cc |
| |
| if {[prepare_for_testing $testfile.exp $testfile $srcfile \ |
| {debug c++ nowarnings}]} { |
| return -1 |
| } |
| |
| # are we on a target board? If so, don't run these tests. |
| # note: this is necessary because we cannot use runto_main (which would |
| # work for remote targets too) because of the different prompt we get |
| # when using annotation level 2. |
| # |
| if [is_remote target] then { |
| return 0 |
| } |
| |
| # |
| # line number where we need to stop in main |
| # |
| set main_line 25 |
| |
| # The commands we test here produce many lines of output; disable "press |
| # <return> to continue" prompts. |
| gdb_test_no_output "set height 0" |
| |
| # |
| # break at main |
| # |
| gdb_test "break 25" \ |
| "Breakpoint.*at.* file .*$srcfile, line.*" \ |
| "breakpoint main" |
| |
| |
| # |
| # NOTE: this prompt is OK only when the annotation level is > 1 |
| # NOTE: When this prompt is in use the gdb_test procedure cannot be used because |
| # it assumes that the last char of the gdb_prompt is a white space. This is not |
| # true with this annotated prompt. So we must use send_gdb and gdb_expect. |
| # |
| |
| set old_gdb_prompt $gdb_prompt |
| set gdb_prompt "\r\n\032\032pre-prompt\r\n$gdb_prompt \r\n\032\032prompt\r\n" |
| |
| send_gdb "set annotate 2\n" |
| gdb_expect { |
| -re "set annotate 2\r\n$gdb_prompt$" { pass "annotation set at level 2" } |
| -re ".*$gdb_prompt$" { fail "annotation set at level 2" } |
| timeout { fail "annotation set at level 2 (timeout)" } |
| } |
| |
| gdb_test_multiple "run" "run until main breakpoint" { |
| -re "$main_line.*$gdb_prompt$" { |
| pass "run until main breakpoint" |
| } |
| } |
| |
| # |
| # print class 'a' with public fields. |
| # this will test: |
| # annotate-field-begin |
| # annotate-field-name-end |
| # annotate-field-value |
| # annotate-field-end |
| # |
| gdb_test_multiple "print a" "print class" { |
| -re "\r\n\032\032post-prompt\r\n\r\n\032\032value-history-begin 1 -\r\n.*= \r\n\032\032value-history-value\r\n\\{\r\n\032\032field-begin -\r\nx\r\n\032\032field-name-end\r\n = \r\n\032\032field-value\r\n1\r\n\032\032field-end\r\n, \r\n\032\032field-begin -\r\ny\r\n\032\032field-name-end\r\n = \r\n\032\032field-value\r\n2\r\n\032\032field-end\r\n\\}\r\n\r\n\032\032value-history-end\r\n$gdb_prompt$" { |
| pass "print class" |
| } |
| } |
| |
| # |
| # continue until exit |
| # this will test: |
| # annotate-exited |
| # `a.x is 1' is asynchronous regarding to `frames-invalid'. |
| # |
| gdb_test_multiple "continue" "continue until exit" { |
| -re "\r\n\032\032post-prompt\r\nContinuing.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)*\r\na.x is 1\r\n\(\r\n\032\032frames-invalid\r\n\)*\r\n\032\032exited 0\r\n$inferior_exited_re normally.\r\n\r\n\032\032stopped\r\n$gdb_prompt$" { |
| pass "continue until exit" |
| } |
| } |
| |
| # |
| # delete all breakpoints |
| # |
| send_gdb "delete\n" |
| gdb_expect { |
| -re ".*Delete all breakpoints. \\(y or n\\) \r\n\032\032query.*$" { |
| send_gdb "y\n" |
| gdb_expect { |
| -re "\r\n\032\032post-query\r\n$gdb_prompt$" { pass "delete bps" } |
| -re ".*$gdb_prompt$" { fail "delete bps" } |
| timeout { fail "delete bps (timeout)" } |
| } |
| } |
| -re ".*$gdb_prompt$" { fail "delete bps" } |
| timeout { fail "delete bps (timeout)" } |
| } |
| |
| # |
| # break at first line of main. |
| # |
| gdb_test_multiple "break 22" "break at main" { |
| -re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-invalid\r\nBreakpoint.*at $hex: file.*$srcfile, line.*\r\n$gdb_prompt$" { |
| pass "breakpoint at main" |
| } |
| } |
| |
| # |
| # change value of main_line |
| # |
| set main_line 22 |
| |
| # |
| # run program up to breakpoint. |
| # |
| |
| gdb_test_multiple "run" "run until main breakpoint" { |
| -re "$main_line.*$gdb_prompt$" { |
| pass "run until main breakpoint" |
| } |
| } |
| |
| # |
| # set up a watch point on a.x |
| # |
| gdb_test_multiple "watch a.x" "set watch on a.x" { |
| -re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-invalid\r\n.*atchpoint 3: a.x\r\n$gdb_prompt$" { |
| pass "set watch on a.x" |
| } |
| } |
| |
| # |
| # do a next, so that the watchpoint triggers. This will test: |
| # annotate-watchpoint |
| # |
| gdb_test_multiple "next" "watch triggered on a.x" { |
| -re "\r\n\032\032post-prompt\r\n\r\n(\032\032breakpoints-invalid\r\n\r\n)*\032\032starting\r\n\r\n(\032\032frames-invalid\r\n\r\n)*\032\032watchpoint 3\r\n.*atchpoint 3: a.x\r\n\r\nOld value = 0\r\nNew value = 1\r\n\r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nmain\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*$srcfile\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n$decimal\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source .*$srcfile.*beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n.*$gdb_prompt$" { |
| pass "watch triggered on a.x" |
| } |
| -re "\r\n\032\032post-prompt\r\n\r\n(\032\032breakpoints-invalid\r\n\r\n)*\032\032starting\r\n\r\n(\032\032frames-invalid\r\n\r\n)*\032\032source .*$srcfile.*beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" { |
| kfail "gdb/38" "watch triggered on a.x" |
| } |
| } |
| |
| |
| # |
| # send ^C to gdb, so that the quit() function gets called |
| # and annotate-quit is tested |
| # test: |
| # annotate-quit |
| # |
| send_gdb "\003" |
| gdb_expect { |
| -re "\r\n\032\032error-begin\r\nQuit\r\n\r\n\032\032quit\r\n$gdb_prompt$" \ |
| { pass "annotate-quit" } |
| -re ".*$gdb_prompt$" { fail "annotate-quit" } |
| timeout { fail "annotate-quit (timeout)" } |
| } |
| |
| # |
| # FIXME: the testsuite does not currently have tests for |
| # annotate_catchpoints and annotate_function_call |
| # and a few variants of the annotations that are |
| # tested (marked by FIXME on the annot?.exp files) |
| # |
| |
| # reinstall the old prompt for the rest of the testsuite. |
| |
| set gdb_prompt $old_gdb_prompt |
| |
