| OUTPUT_FORMAT("elf32-m32r", "elf32-m32r", |
| "elf32-m32r") |
| OUTPUT_ARCH(m32r) |
| ENTRY(_start) |
| SEARCH_DIR(/usr/cygnus/m32r-961018/H-sparc-sun-sunos4.1//lib); |
| /* Do we need any of these for elf? |
| __DYNAMIC = 0; */ |
| SECTIONS |
| { |
| OVERLAY 0x300000 : AT (0x400000) |
| { |
| .ovly0 { foo.o(.text) } |
| .ovly1 { bar.o(.text) } |
| } |
| OVERLAY 0x380000 : AT (0x480000) |
| { |
| .ovly2 { baz.o(.text) } |
| .ovly3 { grbx.o(.text) } |
| } |
| OVERLAY 0x340000 : AT (0x440000) |
| { |
| .data00 { foo.o(.data) } |
| .data01 { bar.o(.data) } |
| } |
| OVERLAY 0x3C0000 : AT (0x4C0000) |
| { |
| .data02 { baz.o(.data) } |
| .data03 { grbx.o(.data) } |
| } |
| |
| /* Read-only sections, merged into text segment: */ |
| . = 0x208000; |
| .interp : { *(.interp) } |
| .hash : { *(.hash) } |
| .dynsym : { *(.dynsym) } |
| .dynstr : { *(.dynstr) } |
| .rel.text : { *(.rel.text) } |
| .rela.text : { *(.rela.text) } |
| .rel.data : { *(.rel.data) } |
| .rela.data : { *(.rela.data) } |
| .rel.rodata : { *(.rel.rodata) } |
| .rela.rodata : { *(.rela.rodata) } |
| .rel.got : { *(.rel.got) } |
| .rela.got : { *(.rela.got) } |
| .rel.ctors : { *(.rel.ctors) } |
| .rela.ctors : { *(.rela.ctors) } |
| .rel.dtors : { *(.rel.dtors) } |
| .rela.dtors : { *(.rela.dtors) } |
| .rel.init : { *(.rel.init) } |
| .rela.init : { *(.rela.init) } |
| .rel.fini : { *(.rel.fini) } |
| .rela.fini : { *(.rela.fini) } |
| .rel.bss : { *(.rel.bss) } |
| .rela.bss : { *(.rela.bss) } |
| .rel.plt : { *(.rel.plt) } |
| .rela.plt : { *(.rela.plt) } |
| .init : { *(.init) } =0 |
| .plt : { *(.plt) } |
| .text : |
| { |
| *(.text) |
| /* .gnu.warning sections are handled specially by elf32.em. */ |
| *(.gnu.warning) |
| *(.gnu.linkonce.t*) |
| } =0 |
| _etext = .; |
| PROVIDE (etext = .); |
| .fini : { *(.fini) } =0 |
| .rodata : { *(.rodata) *(.gnu.linkonce.r*) } |
| .rodata1 : { *(.rodata1) } |
| /* Adjust the address for the data segment. We want to adjust up to |
| the same address within the page on the next page up. */ |
| . = ALIGN(32) + (ALIGN(8) & (32 - 1)); |
| .data : |
| { |
| *(.data) |
| *(.gnu.linkonce.d*) |
| _ovly_table = .; |
| _ovly0_entry = .; |
| LONG(ABSOLUTE(ADDR(.ovly0))); |
| LONG(SIZEOF(.ovly0)); |
| LONG(LOADADDR(.ovly0)); |
| LONG(0); |
| _ovly1_entry = .; |
| LONG(ABSOLUTE(ADDR(.ovly1))); |
| LONG(SIZEOF(.ovly1)); |
| LONG(LOADADDR(.ovly1)); |
| LONG(0); |
| _ovly2_entry = .; |
| LONG(ABSOLUTE(ADDR(.ovly2))); |
| LONG(SIZEOF(.ovly2)); |
| LONG(LOADADDR(.ovly2)); |
| LONG(0); |
| _ovly3_entry = .; |
| LONG(ABSOLUTE(ADDR(.ovly3))); |
| LONG(SIZEOF(.ovly3)); |
| LONG(LOADADDR(.ovly3)); |
| LONG(0); |
| _data00_entry = .; |
| LONG(ABSOLUTE(ADDR(.data00))); |
| LONG(SIZEOF(.data00)); |
| LONG(LOADADDR(.data00)); |
| LONG(0); |
| _data01_entry = .; |
| LONG(ABSOLUTE(ADDR(.data01))); |
| LONG(SIZEOF(.data01)); |
| LONG(LOADADDR(.data01)); |
| LONG(0); |
| _data02_entry = .; |
| LONG(ABSOLUTE(ADDR(.data02))); |
| LONG(SIZEOF(.data02)); |
| LONG(LOADADDR(.data02)); |
| LONG(0); |
| _data03_entry = .; |
| LONG(ABSOLUTE(ADDR(.data03))); |
| LONG(SIZEOF(.data03)); |
| LONG(LOADADDR(.data03)); |
| LONG(0); |
| _novlys = .; |
| LONG((_novlys - _ovly_table) / 16); |
| |
| CONSTRUCTORS |
| } |
| .data1 : { *(.data1) } |
| .ctors : { *(.ctors) } |
| .dtors : { *(.dtors) } |
| .got : { *(.got.plt) *(.got)} |
| .dynamic : { *(.dynamic) } |
| /* We want the small data sections together, so single-instruction offsets |
| can access them all, and initialized data all before uninitialized, so |
| we can shorten the on-disk segment size. */ |
| .sdata : { *(.sdata) } |
| _edata = .; |
| PROVIDE (edata = .); |
| __bss_start = .; |
| .sbss : { *(.sbss) *(.scommon) } |
| .bss : { *(.dynbss) *(.bss) *(COMMON) } |
| _end = . ; |
| PROVIDE (end = .); |
| /* Stabs debugging sections. */ |
| .stab 0 : { *(.stab) } |
| .stabstr 0 : { *(.stabstr) } |
| .stab.excl 0 : { *(.stab.excl) } |
| .stab.exclstr 0 : { *(.stab.exclstr) } |
| .stab.index 0 : { *(.stab.index) } |
| .stab.indexstr 0 : { *(.stab.indexstr) } |
| .comment 0 : { *(.comment) } |
| /* DWARF debug sections. |
| Symbols in the .debug DWARF section are relative to the beginning of the |
| section so we begin .debug at 0. It's not clear yet what needs to happen |
| for the others. */ |
| .debug 0 : { *(.debug) } |
| .debug_srcinfo 0 : { *(.debug_srcinfo) } |
| .debug_aranges 0 : { *(.debug_aranges) } |
| .debug_pubnames 0 : { *(.debug_pubnames) } |
| .debug_sfnames 0 : { *(.debug_sfnames) } |
| .line 0 : { *(.line) } |
| .stack 0x5ffffc : { _stack = .; *(.stack) } |
| /* These must appear regardless of . */ |
| } |
