blob: a0a3c2be187e51dad026ba390991f691028cbd1e [file] [log] [blame]
2010-12-31 Michael Snyder <msnyder@vmware.com>
* annotate.c: Comment cleanup, shorten long lines.
* arch-utils.c: Ditto.
* arch-utils.h: Ditto.
* auxv.c: Ditto.
* auxv.h: Ditto.
* ax-gdb.c: Ditto.
* ax-gdb.h: Ditto.
* ax-general.c: Ditto.
* breakpoint.h: Ditto.
* buildsym.h: Ditto.
* charset.c: Ditto.
* charset.h: Ditto.
* c-lang.c: Ditto.
* c-lang.h: Ditto.
* coff-pe-read.c: Ditto.
* coff-pe-read.h: Ditto.
* coffread.c: Ditto.
* command.h: Ditto.
* complaints.c: Ditto.
* complaints.h: Ditto.
* completer.c: Ditto.
* completer.h: Ditto.
* corefile.c: Ditto.
* corelow.c: Ditto.
* core-regset.c: Ditto.
* cp-abi.c: Ditto.
* cp-abi.h: Ditto.
* cp-namespace.c: Ditto.
* cp-support.c: Ditto.
* cp-support.h: Ditto.
* cp-valprint.c: Ditto.
* cp-typeprint.c: Ditto.
* c-valprint.c: Ditto.
2010-12-30 Mike Frysinger <vapier@gentoo.org>
* bfin-tdep.c (bfin_register_type): Move || to start of line.
2010-12-29 Michael Snyder <msnyder@vmware.com>
* bcache.c: Comment clean-up, shorten long lines..
* block.c: Ditto.
* blockframe.c: Ditto.
* breakpoint.c: Ditto.
* bsd-kvm.c: Ditto.
* buildsym.c: Ditto.
2010-12-29 Jie Zhang <jie.zhang@analog.com>
* configure.tgt (bfin-*-*): Set build_gdbserver to yes.
* NEWS: Mention new Blackfin support.
* regformats/reg-bfin.dat: New file.
2010-12-29 Jie Zhang <jie.zhang@analog.com>
Mike Frysinger <vapier@gentoo.org>
* Makefile.in (ALLDEPFILES): Add bfin-linux-tdep.c and bfin-tdep.c.
(HFILES_NO_SRCDIR): Add bfin-tdep.h.
(ALL_TARGET_OBS): Add bfin-linux-tdep.o and bfin-tdep.o.
* NEWS: Mention new Blackfin port.
* bfin-tdep.c, bfin-tdep.h, bfin-linux-tdep.c,
syscalls/bfin-linux.xml: New files.
* configure.tgt (bfin-*-*): Handle bfin targets.
2010-12-29 Hui Zhu <teawater@gmail.com>
* ax-gdb.c (gen_expr): Change error message.
2010-12-29 Joel Brobecker <brobecker@adacore.com>
* gdb.c: Revert the previous change, which was probably committed
by accident.
2010-12-29 Joel Brobecker <brobecker@adacore.com>
* ada-lang.c: Fix typo in comment.
2010-12-29 Joel Brobecker <brobecker@adacore.com>
* ada-valprint.c (ada_val_print_1): Print null array pointers as
`0x0' rather than `(null)'. Add assertion.
2010-12-29 Joel Brobecker <brobecker@adacore.com>
* ada-lang.h (ada_coerce_to_simple_array): Add declaration.
* ada-lang.c (ada_typedef_target_type): New function.
(desc_base_type): Add handling of fat pointer typedefs.
(ada_coerce_to_simple_array): Make non-static.
(decode_packed_array_bitsize): Add handling of fat pointer typedefs.
Add assertion.
(ada_template_to_fixed_record_type_1, ada_to_fixed_type)
(ada_check_typedef): Add handling of fat pointer typedefs.
(ada_evaluate_subexp) [OP_FUNCALL]: Likewise.
* ada-typeprint.c (ada_print_type): Add handling of fat pointer
typedefs.
* ada-valprint.c (ada_val_print_1): Convert fat pointers that are not
array accesses to simple arrays rather than simple array pointers.
(ada_value_print): In the case of array descriptors, do not print
the value type description unless it is an array access.
2010-12-29 Joel Brobecker <brobecker@adacore.com>
* target.h (enum target_object): Expand the documentation of
TARGET_OBJECT_OSDATA a bit.
2010-12-28 Michael Snyder <msnyder@vmware.com>
* command.h: Comment clean-up, shorten long lines.
* cli/cli-cmds.c: Ditto.
* cli/cli-cmds.h: Ditto.
* cli/cli-decode.c: Ditto.
* cli/cli-decode.h: Ditto.
* cli/cli-dump.c: Ditto.
* cli/cli-interp.c: Ditto.
* cli/cli-logging.c: Ditto.
* cli/cli-script.c: Ditto.
* cli/cli-setshow.c: Ditto.
* cli/cli-setshow.h: Ditto.
2010-12-28 Michael Snyder <msnyder@vmware.com>
* event-loop.c: Comment clean-up, shorten long lines.
* event-loop.h: Ditto.
* event-top.c: Ditto.
* gdb.c: Ditto.
* gdb.h: Ditto.
* main.c: Ditto.
* top.c: Ditto.
* top.h: Ditto.
2010-12-28 Pedro Alves <pedro@codesourcery.com>
* ax-gdb.c (gen_expr) <OP_REGISTER>: Error out if trying to
collect a user register.
2010-12-28 Hui Zhu <teawater@gmail.com>
* gdbarch.sh (ax_pseudo_register_collect,
ax_pseudo_register_push_stack): new callbacks.
(agent_expr): Forward declare.
* gdbarch.h, gdbarch.c: Regenerate.
* ax-gdb.c (gen_expr): Remove pseudo-register check code.
* ax-general.c (user-regs.h): New include.
(ax_reg): Call gdbarch_ax_pseudo_register_push_stack.
(ax_reg_mask): Call gdbarch_ax_pseudo_register_collect.
* mips-tdep.c (ax.h): New include.
(mips_ax_pseudo_register_collect,
mips_ax_pseudo_register_push_stack): New functions.
(mips_gdbarch_init): Set mips_ax_pseudo_register_collect and
mips_ax_pseudo_register_push_stack.
2010-12-28 Yao Qi <yao@codesourcery.com>
* arm-tdep.c (arm_register_aliases): Remove sp, pc, and fp.
2010-12-28 Joel Brobecker <brobecker@adacore.com>
* inf-child.c (inf_child_acknowledge_created_inferior): Delete.
(inf_child_target): Do not set t->to_acknowledge_created_inferior.
* inf-ptrace.c (inf_ptrace_create_inferior): Remove call to
target_acknowledge_created_inferior.
* inf-ttrace.c (inf_ttrace_him): Likewise.
* target.h (struct target_ops): Delete to_acknowledge_created_inferior
field.
(target_acknowledge_created_inferior): Delete.
* target.c (update_current_target): Remove setting of
to_acknowledge_created_inferior field. Do default value for that
field either.
(debug_to_acknowledge_created_inferior): Delete.
(setup_target_debug): Remove setting of
current_target.to_acknowledge_created_inferior.
2010-12-27 Pedro Alves <pedro@codesourcery.com>
gdb/
* breakpoint.c (breakpoint_restore_shadows): When looking for the
location with the lowest address that overlaps the memory range we
want to restore shadows for, account for multiple locations at the
same address.
2010-12-27 Jan Kratochvil <jan.kratochvil@redhat.com>
Code cleanup - renaming.
* breakpoint.c: Use bl for `*bp_location' variables, blp_tmp for
`**bp_location' helper variables, b_tmp for `*breakpoint' helper
variables.
2010-12-27 Kevin Buettner <kevinb@redhat.com>
Hui Zhu <teawater@gmail.com>
* mips-tedp.c (mips_register_name): Add comments.
2010-12-23 Yao Qi <yao@codesourcery.com>
* arm-tdep.c (thumb_analyze_prologue): Move some code ...
(EXTRACT_MOVW_MOVT_IMM_T): ... here. New macro.
(EXTRACT_MOVW_MOVT_IMM_A): New macro.
(arm_analyze_load_stack_chk_guard): New.
(arm_skip_stack_protector): New.
(arm_skip_prologue): Adjust post_prologue_pc by
arm_skip_stack_protector.
2010-12-23 Yao Qi <yao@codesourcery.com>
* arm-tdep.c (arm_gdbarch_init): Remove invoke to
set_gdbarch_deprecated_fp_regnum.
2010-12-22 Marc Khouzam <marc.khouzam@ericsson.com>
* inferior.c (remove_inferior_command): Don't remove an active inferior.
* mi/mi-main.c (mi_cmd_remove_inferior): Ditto.
2010-12-21 Tom Tromey <tromey@redhat.com>
* thread.c (print_thread_info): Make a ui-out table in CLI mode.
2010-12-20 Yao Qi <yao@codesourcery.com>
* arm-tdep.c (arm_register_reggroup_p): New.
(arm_gdbarch_init): Set arm_register_reggroup_p for hook
register_reggroup_p.
2010-12-20 Yao Qi <yao@codesourcery.com>
* features/arm-core.xml: Add attribute type to reg from r0 to r12.
* features/arm-with-iwmmxt.c: Regenerate.
* features/arm-with-neon.c: Regenerate.
* features/arm-with-vfpv2.c: Regenerate.
* features/arm-with-vfpv3.c: Regenerate.
2010-12-17 Marc Khouzam <marc.khouzam@ericsson.com>
* mi/mi-main.c (mi_cmd_remove_inferior): Don't delete current inferior.
(get_other_inferior): New.
2010-12-17 Marc Khouzam <marc.khouzam@ericsson.com>
* python/py-progspace.c (py_free_pspace): Obtain arch another
way to avoid dereferencing a null pointer.
2010-12-17 Michael Snyder <msnyder@vmware.com>
* utils.c (do_my_cleanups): Comment fix-up.
2010-12-17 Kevin Buettner <kevinb@redhat.com>
* mips-tdep.c (make_mips16_addr): New function.
(mips_elf_make_msymbol_special): Don't set the low bit in the
symbol's address.
(mips_read_pc, mips_unwind_pc, mips_addr_bits_remove): Strip bit
indicating mips16 address, if present.
(mips_write_pc): Set bit indicating mips16 address when in a mips16
function.
(mips_eabi_push_dummy_call, mips_o64_push_dummy_call): Likewise,
but for each function pointer argument to inferior function call.
2010-12-17 Tom Tromey <tromey@redhat.com>
* psympriv.h (struct partial_symtab) <readin>: Move field
earlier.
2010-12-16 Kevin Buettner <kevinb@redhat.com>
* mips-tdep.c (mips_convert_register_float_case_p)
(mips_convert_register_gpreg_case_p): New functions.
(mips_convert_register_p): Invoke new functions above.
(mips_register_to_value): Add case for fetching value shorter
than 64 bits from a 64-bit register.
(mips_value_to_register): Add case for storing value shorter
than 64 bits into a 64-bit register.
2010-12-16 Joel Borggrén-Franck <joel.borggren.franck@gmail.com>
* python/py-value.c (value_object_type) <tp_flags>: Add
Py_TPFLAGS_BASETYPE.
2010-12-16 Mike Frysinger <vapier@gentoo.org>
* NEWS: Mention new sim --map-info flag.
2010-12-15 Doug Evans <dje@google.com>
* dwarf2read.c (_initialize_dwarf2_read): Fix help text of
"save gdb-index" command.
2010-12-15 Tom Tromey <tromey@redhat.com>
* infrun.c (save_infcall_control_state): Handle the
exception-resume breakpoint.
(restore_infcall_control_state): Likewise.
(discard_infcall_control_state): Likewise.
2010-12-15 Kevin Buettner <kevinb@redhat.com>
* mips-tdep.c (mips_pseudo_register_write): Sign extend 32-bit
cooked values that are being transferred to 64-bit raw registers.
(mips_pseudo_register_read): Revise to preserve symmetry with
mips_pseudo_register_write().
2010-12-15 Greg Watson <g.watson@computer.org>
* f-exp.y (yylex): Check entire token against keywords.
2010-12-15 Doug Evans <dje@google.com>
Rename "maint set python auto-load" to "set auto-load-scripts".
* NEWS: Mention it.
* python/py-auto-load.c (auto_load_scripts): Renamed from
gdbpy_auto_load.
(load_auto_scripts_for_objfile): Update.
(gdbpy_initialize_auto_load): Rename "maint set python auto-load" to
"set auto-load-scripts".
2010-12-14 Kevin Buettner <kevinb@redhat.com>
* mips-tdep.c (mips_eabi_push_dummy_call): Place signed, rather
than unsigned, values in registers.
2010-12-14 Ken Werner <ken.werner@de.ibm.com>
* valops.c (value_one): Use get_array_bounds to compute the number
of array elements instead of dividing the length of the array by the
length of the element types.
* valarith.c (value_complement, value_neg): Likewise.
2010-12-14 Joel Brobecker <brobecker@adacore.com>
* irix5-nat.c: Replace fp_r, fp_regs and fp_scr by __fp_r, __fp_regs
and __fp_scr respectively throughout.
* configure.ac: Compile with -Dsiginfo=__siginfo if building with
Python using GCC on IRIX.
* configure: Regenerate.
2010-12-13 Kevin Buettner <kevinb@redhat.com>
* solib-svr4.c (enable_break): Don't attempt to place breakpoints,
when attaching, on the names in bkpt_names: _start, __start, and
main.
2010-12-12 Stan Shebs <stan@codesourcery.com>
* value.c (value_of_internalvar): Add case for trace state
variables.
2010-12-12 Doug Evans <dje@google.com>
* dwarf2read.c (dwarf2_per_objfile): New member quick_file_names_table.
(dwarf2_per_cu_quick_data): Move definition down to "quick functions"
section. Delete members lines full_names. Rename read_lines to
no_file_data.
(quick_file_names): New struct.
(hash_file_name_entry, eq_file_name_entry): New functions.
(delete_file_name_entry, create_quick_file_names_table): New functions.
(dwarf2_read_index): Initialize quick_file_names_table.
(dw2_get_file_names): Renamed from dw2_require_line_header.
Return pointer to quick_file_names entry. All callers updated.
(dw2_get_real_path): Renamed from dw2_require_full_path.
Replace per_cu arg with pointer to quick_file_names entry.
All callers updated.
(dw2_free_cached_file_names): New function.
(dw2_forget_cached_source_info): Call it (via htab_traverse_noresize).
(dwarf2_initialize_objfile): Initialize quick_file_names_table in
the OBJF_READNOW case.
(dwarf2_free_objfile): Rewrite freeing of quick file names tables.
2010-12-12 Mark Kettenis <kettenis@gnu.org>
* mips64obsd-tdep.c (floatformats_mips64_quad): New define.
(mips64obsd_init_abi): Set long_double_bit and long_double_format.
2010-12-12 Mark Kettenis <kettenis@gnu.org>
* sparc-tdep.c: Fix typo in comment.
2010-12-10 Doug Evans <dje@google.com>
* dwarf2read.c: Whitespace cleanup, plus comment additions.
No code changes.
2010-12-10 Tom Tromey <tromey@redhat.com>
* NEWS: Document exception-handling change.
2010-12-09 Marc Khouzam <marc.khouzam@ericsson.com>
* mi/mi-parse.c (mi_parse): Wrong error message.
2010-12-09 Doug Evans <dje@google.com>
* symfile.h (quick_symbol_functions): Clarify usage of
map_symbol_filenames.
2010-12-09 Tom Tromey <tromey@redhat.com>
* mi/mi-parse.h (mi_parse): Update.
* mi/mi-parse.c (mi_parse_cleanup): New function.
(mi_parse): Add 'token' argument. Throw exception on error.
* mi/mi-main.c (mi_print_exception): New function.
(mi_execute_command): Use mi_print_exception. Catch exceptions
from mi_parse.
2010-12-09 Tom Tromey <tromey@redhat.com>
PR c++/9593:
* thread.c (clear_thread_inferior_resources): Call
delete_longjmp_breakpoint.
* infrun.c (handle_inferior_event): Handle exception breakpoints.
(handle_inferior_event): Likewise.
(insert_exception_resume_breakpoint): New function.
(check_exception_resume): Likewise.
* inferior.h (delete_longjmp_breakpoint_cleanup): Declare.
* infcmd.c (delete_longjmp_breakpoint_cleanup): No longer static.
(step_1): Set thread's initiating frame.
(until_next_continuation): New function.
(until_next_command): Support exception breakpoints.
(finish_command_continuation): Delete longjmp breakpoint.
(finish_forward): Support exception breakpoints.
* gdbthread.h (struct thread_info) <initiating_frame>: New field.
* breakpoint.h (enum bptype) <bp_exception, bp_exception_resume,
bp_exception_master>: New constants.
(struct bpstat_what) <is_longjmp>: New field.
(set_longjmp_breakpoint): Update.
* breakpoint.c (create_exception_master_breakpoint): New function.
(update_breakpoints_after_exec): Handle bp_exception_master. Call
create_exception_master_breakpoint.
(print_it_typical): Handle bp_exception_master, bp_exception.
(bpstat_stop_status): Handle bp_exception_master.
(bpstat_what): Handle bp_exception_master, bp_exception,
bp_exception_resume.
(bptype_string): Likewise.
(print_one_breakpoint_location): Likewise.
(allocate_bp_location): Likewise.
(set_longjmp_breakpoint): Handle exception breakpoints. Change
interface.
(delete_longjmp_breakpoint): Handle exception breakpoints.
(mention): Likewise.
(struct until_break_command_continuation_args) <thread_num>: New
field.
(until_break_command_continuation): Call
delete_longjmp_breakpoint.
(until_break_command): Support exception breakpoints.
(delete_command): Likewise.
(breakpoint_re_set_one): Likewise.
(breakpoint_re_set): Likewise.
2010-12-08 Doug Evans <dje@google.com>
* gdbtypes.h (TYPE_IS_OPAQUE): Reformat.
* gdbtypes.c (check_typedef): Tweak comment.
PR symtab/12302
* dwarf2read.c (struct psymtab_cu_index_map): New struct.
(hash_psymtab_cu_index, eq_psymtab_cu_index): New functions.
(struct addrmap_index_data): New struct.
(add_address_entry): Remove arg `pst', new args `start', `end'.
(add_address_entry_worker, write_address_map): New functions.
(write_psymtabs_to_index): Address table generation moved to
write_address_map. Build a table mapping psymtab to CU index
to pass to it.
* dwarf2read.c (write_psymtabs_to_index): When stat fails, pass file
name to perror.
* symfile.h (quick_symbol_functions): Clarify usage of
expand_symtabs_with_filename.
* dwarf2read.c (dw2_expand_symtabs_with_filename): Only iterate over
comp units, ignore type units.
* dwarf2read.c (dw2_expand_symtabs_with_filename): Use FILENAME_CMP.
2010-12-07 Doug Evans <dje@google.com>
* dwarf2read.c (dw2_lookup_symtab): Remove duplicate call to
gdb_realpath.
PR python/12227
* NEWS: Mention -data-directory.
* main.c (captured_main): Recognize -data-directory.
2010-12-06 Marc Khouzam <marc.khouzam@ericsson.com>
* mi/mi-parse.c (mi_parse): Missing else.
2010-12-04 Masaki Muranaka <monaka@monami-software.com>
* configure.tgt: Accept microblaze*-*-linux* for linux target
and microblaze*-*-* for as target.
2010-12-02 Keith Seitz <keiths@redhat.com>
* linespec.c (find_method): Move name canonicalization outside
the loop.
Be paranoid and use a cleanup.
2010-12-01 Doug Evans <dje@google.com>
* dwarf2read.c (save_gdb_index_command): Add comment.
2010-12-01 Ulrich Weigand <uweigand@de.ibm.com>
* valops.c (value_assign): Returned value is never lazy. If a
C++ class type is returned, fix incorrect enclosing type / embedded
offset. If internal variable is returned, allocate new internalvar
value using value_of_internalvar.
* NEWS: Document changes in behavior of "print x = 0" and similar
expressions.
2010-11-29 Doug Evans <dje@google.com>
* python/lib/gdb/printing.py (register_pretty_printer): Change
printer-name:subprinter-name to printer-name;subprinter-name.
* python/lib/gdb/command/pretty_printers.py (parse_printer_regexps):
Ditto.
(InfoPrettyPrinter, EnablePrettyPrinter, DisablePrettyPrinter): Ditto.
2010-11-29 Tom Tromey <tromey@redhat.com>
* opencl-lang.c (lval_func_check_synthetic_pointer): New
function.
* value.h (struct lval_funcs) <indirect, check_synthetic_pointer>:
New fields.
(value_bits_synthetic_pointer): Declare.
* value.c (value_bits_synthetic_pointer): New function.
* valprint.c (valprint_check_validity): Handle synthetic
pointers.
* valops.c (value_ind): Use new 'indirect' lval_funcs method.
* valarith.c (value_ptradd): Use set_value_component_location.
* p-valprint.c (pascal_object_print_value_fields): Handle
synthetic pointers.
* jv-valprint.c (java_print_value_fields): Handle synthetic
pointers.
* dwarf2read.c (dwarf_stack_op_name): Add
DW_OP_GNU_implicit_pointer.
(dwarf2_fetch_die_location_block): Add get_frame_pc, baton
arguments. Handle location lists.
(fill_in_loclist_baton): New function.
(dwarf2_symbol_mark_computed): Use it.
* dwarf2loc.h (dwarf2_find_location_expression): Declare.
(dwarf2_fetch_die_location_block): Add get_frame_pc, baton
arguments.
* dwarf2loc.c (dwarf2_find_location_expression): Rename from
find_location_expression. No longer static. Update all callers.
(dwarf_expr_frame_pc): New function.
(per_cu_dwarf_call): Add get_frame_pc, baton arguments. Update
all callers.
(struct piece_closure) <per_cu>: New field.
(allocate_piece_closure): Add per_cu argument.
(read_pieced_value): Handle DWARF_VALUE_IMPLICIT_POINTER.
(check_pieced_value_bits): Remove validity argument, add check_for
argument. Handle DWARF_VALUE_IMPLICIT_POINTER.
(check_pieced_value_validity, check_pieced_value_invalid):
Update.
(check_pieced_synthetic_pointer): New function.
(get_frame_address_in_block_wrapper): New function.
(indirect_pieced_value): New function.
(pieced_value_funcs): Update.
(invalid_synthetic_pointer): New function.
(dwarf2_evaluate_loc_desc_full): Rename from
dwarf2_evaluate_loc_desc. Add byte_offset argument.
(dwarf2_evaluate_loc_desc): Rewrite.
(dwarf2_loc_desc_needs_frame): Set new field on context.
(get_ax_pc): New function.
(disassemble_dwarf_expression): Handle
DW_OP_GNU_implicit_pointer.
* dwarf2expr.h (enum dwarf_value_location)
<DWARF_VALUE_IMPLICIT_POINTER>: New constant.
(struct dwarf_expr_context) <get_frame_pc>: New field.
(struct dwarf_expr_piece) <v.ptr>: New field.
* dwarf2expr.c (add_piece): Handle DWARF_VALUE_IMPLICIT_POINTER.
(execute_stack_op): Handle DW_OP_GNU_implicit_pointer.
* dwarf2-frame.c (no_get_frame_pc): New function.
(execute_stack_op): Set new field on context.
* cp-valprint.c (cp_print_value_fields): Handle synthetic
pointers.
2010-11-29 Phil Muldoon <pmuldoon@redhat.com>
PR python/12199
* python/py-breakpoint.c (bppy_delete_breakpoint): New function.
2010-11-28 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix step_resume_breakpoint unsaved during an infcall.
* gdbthread.h (struct thread_control_state): Move here field
step_resume_breakpoint ...
(struct thread_info): ... from here.
* infrun.c (save_infcall_control_state): Reset
control.step_resume_breakpoint to NULL.
(restore_infcall_control_state, discard_infcall_control_state): Delete
control.step_resume_breakpoint.
* arm-linux-tdep.c, infrun.c, thread.c: Update all the references to
the moved field.
2010-11-28 Jan Kratochvil <jan.kratochvil@redhat.com>
Rename and move inferior_thread_state and inferior_status.
* gdbthread.h (struct thread_control_state): New struct, move fields
step_range_start, step_range_end, step_frame_id, step_stack_frame_id,
trap_expected, proceed_to_finish, in_infcall, step_over_calls,
stop_step and stop_bpstat here from struct thread_info.
(struct thread_suspend_state): New struct, move field stop_signal here
from struct thread_info.
(struct thread_info): Move the fields above from this struct.
* inferior.h: Move the inferior_thread_state and inferior_status
declarations comment to their definitions at infrun.c.
(struct inferior_control_state): New struct, move field stop_soon from
struct inferior here.
(struct inferior_suspend_state): New empty struct.
(struct inferior): New fields control and suspend. Move out field
stop_soon.
* infrun.c (struct inferior_thread_state): Rename to ...
(infcall_suspend_state): ... here. Replace field stop_signal by
fields thread_suspend and inferior_suspend.
(save_inferior_thread_state): Rename to ...
(save_infcall_suspend_state): ... here. New variable inf. Update the
code for new fields.
(restore_inferior_thread_state): Rename to ...
(restore_infcall_suspend_state): ... here. New variable inf. Update
the code for new fields.
(do_restore_inferior_thread_state_cleanup): Rename to ...
(do_restore_infcall_suspend_state_cleanup): ... here.
(make_cleanup_restore_inferior_thread_state): Rename to ...
(make_cleanup_restore_infcall_suspend_state): ... here.
(discard_inferior_thread_state): Rename to ...
(discard_infcall_suspend_state): ... here.
(get_inferior_thread_state_regcache): Rename to ...
(get_infcall_suspend_state_regcache): ... here.
(struct inferior_status): Rename to ...
(struct infcall_control_state): ... here. Replace fields
step_range_start, step_range_end, step_frame_id, step_stack_frame_id,
trap_expected, proceed_to_finish, in_infcall, step_over_calls,
stop_step, stop_bpstat and stop_soon by fields thread_control and
inferior_control.
(save_inferior_status): Rename to ...
(save_infcall_control_state): ... here. Update the code for new
fields.
(restore_inferior_status): Rename to ...
(restore_infcall_control_state): ... here. Update the code for new
fields.
(do_restore_inferior_status_cleanup): Rename to ...
(do_restore_infcall_control_state_cleanup): ... here.
(make_cleanup_restore_inferior_status): Rename to ...
(make_cleanup_restore_infcall_control_state): ... here.
(discard_inferior_status): Rename to ...
(discard_infcall_control_state): ... here.
* alpha-tdep.c, breakpoint.c, dummy-frame.c, dummy-frame.h,
exceptions.c, fbsd-nat.c, gdbthread.h, infcall.c, infcmd.c,
inferior.c, inferior.h, infrun.c, linux-nat.c, mi/mi-interp.c,
mips-tdep.c, procfs.c, solib-irix.c, solib-osf.c, solib-spu.c,
solib-sunos.c, solib-svr4.c, thread.c, windows-nat.c: Update all the
references to the moved fields and renamed functions.
2010-11-26 Jan Kratochvil <jan.kratochvil@redhat.com>
* infcall.c (struct inferior_thread_state) <siginfo_gdbarch>: Fix up
the comment.
(save_inferior_thread_state): Reset tp->stop_signal.
2010-11-26 Jan Kratochvil <jan.kratochvil@redhat.com>
* infcall.c (call_function_by_hand): Remove variable
caller_state_cleanup.
2010-11-25 Marc Khouzam <marc.khouzam@ericsson.com>
PR breakpoints/12217
* breakpoint.c (is_marker_spec): Check for NULL.
2010-11-25 Pedro Alves <pedro@codesourcery.com>
* breakpoint.h: No longer include python.h or python-internal.h.
(struct breakpoint_object): Forward declare.
* defs.h (PyObject) [!HAVE_PYTHON]: Don't define.
* varobj.c (PyObject) [!HAVE_PYTHON]: Define.
* python/py-breakpoint.c (build_bp_list): Cast py_bp_object to
PyObject pointer.
(gdbpy_breakpoint_created): Remove casts around py_bp_object
accesses.
2010-11-24 Joel Brobecker <brobecker@adacore.com>
* rs6000-tdep.c (bfd_uses_spe_extensions): Use bfd_elf_get_obj_attr_int
only if HAVE_ELF is defined.
2010-11-24 Jan Kratochvil <jan.kratochvil@redhat.com>
Code cleanup.
* infrun.c (struct inferior_status) <stepping_over_breakpoint>
(save_inferior_status) <stepping_over_breakpoint>
(restore_inferior_status) <stepping_over_breakpoint>: Rename to
trap_expected.
(struct inferior_status) <step_resume_break_address>: Remove.
2010-11-24 Jan Kratochvil <jan.kratochvil@redhat.com>
Code cleanup.
* infrun.c (struct inferior_status, save_inferior_status)
(restore_inferior_status): Group and reorder the fields, comment their
groups.
2010-11-24 Jan Kratochvil <jan.kratochvil@redhat.com>
Code cleanup.
* dictionary.c
(struct dict_vector) <iter_match_first, iter_match_next>
(iter_match_first_hashed, iter_match_next_hashed)
(iter_match_first_linear, iter_match_next_linear)
(dict_iter_match_first, dict_iter_match_next, iter_match_first_hashed)
(iter_match_next_hashed, iter_match_first_linear)
(iter_match_next_linear): Use symbol_compare_ftype.
* dictionary.h: Include symfile.h.
(dict_iter_match_first, dict_iter_match_next): Use
symbol_compare_ftype.
* dwarf2read.c (dw2_map_matching_symbols): Likewise.
* psymtab.c (match_partial_symbol, match_partial_symbol, map_block)
(map_matching_symbols_psymtab): Likewise.
* symfile.h (symbol_compare_ftype): New typedef.
(struct quick_symbol_functions) <map_matching_symbols): Use
symbol_compare_ftype.
2010-11-23 Tom Tromey <tromey@redhat.com>
* configure: Rebuild.
* configure.ac (READLINE_TEXI_INCFLAG): New subst.
2010-11-19 Tom Tromey <tromey@redhat.com>
* Makefile.in (SUBDIRS): Add doc.
* configure: Rebuild.
* configure.ac: Don't configure in doc. Create doc/Makefile.
2010-11-23 Phil Muldoon <pmuldoon@redhat.com>
PR python/12212
* python/py-inferior.c (find_thread_object): Check if PIDGET
returns 0.
010-11-22 Joel Brobecker <brobecker@adacore.com>
* ada-lang.c (ada_template_to_fixed_record_type_1): Delete bit_incr.
2010-11-22 Joel Brobecker <brobecker@adacore.com>
* ada-lang.c (ada_to_fixed_type): Expand function documentation.
Return the original type if the main type portions match rather
than when the type themselves match.
2010-11-22 Joel Brobecker <brobecker@adacore.com>
* ada-lang.c (ada_template_to_fixed_record_type_1):
For dynamic fields, check the field size against the maximum
object size.
2010-11-22 Joel Brobecker <brobecker@adacore.com>
* mips-irix-tdep.c (mips_irix_n32_stack_tramp_frame_init): New
function.
(mips_irix_n32_stack_tramp_frame): New static global.
(mips_irix_init_abi): Add mips_irix_n32_stack_tramp_frame to
list of unwinder.
2010-11-22 Jerome Guitton <guitton@adacore.com>
* ada-tasks.c (get_tcb_types_info): Use C lookups to get
ATCB symbols.
2010-11-22 Joel Brobecker <brobecker@adacore.com>
* ada-lang.c (ada_check_typedef): Call ada_check_typedef only
if type1 is a typedef.
2010-11-22 Joel Brobecker <brobecker@adacore.com>
* ada-lang.h (ADA_KNOWN_AUXILIARY_FUNCTION_NAME_PATTERNS): Add
"_finalizer" to the list.
2010-11-22 Joel Brobecker <brobecker@adacore.com>
* symfile.c: Remove all "#if 0"/"#endif" blocks.
2010-11-22 Joel Brobecker <brobecker@adacore.com>
* symfile.c: Add missing second space after period in various comments.
2010-11-22 Joel Brobecker <brobecker@adacore.com>
* ada-typeprint.c (print_array_type): Fix formatting in comment.
(print_selected_record_field_types): Fix formatting in function
documentation.
2010-11-22 Joel Brobecker <brobecker@adacore.com>
* ravenscar-thread.c (_initialize_ravenscar): Fix copy/paste typo
in name of "show ravenscar" prefix command name.
2010-11-22 Joel Brobecker <brobecker@adacore.com>
* ravenscar-thread.c (show_ravenscar_task_switching_command):
Add missing '\n' in output.
2010-11-22 Joel Brobecker <brobecker@adacore.com>
* ravenscar-thread.c (running_thread_name): Change value.
(read_thread_id): Remove advance declaration.
(get_running_thread_msymbol): New function.
(has_ravenscar_runtime): Use get_running_thread_msymbol to
compute msym_running_thread.
(get_running_thread_id): Renames read_thread_id. Slight modifications
to not take any argument anymore, using get_running_thread_msymbol
to determine which symbol to use instead.
(ravenscar_running_thread): Use get_running_thread_id instead of
read_thread_id.
2010-11-22 Joel Brobecker <brobecker@adacore.com>
* ravenscar-sparc-thread.c (supply_register_at_address):
Fix passing of buf in call to regcache_raw_supply.
2010-11-22 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf2read.c (dwarf2_read_index): Ignore higher .gdb_index versions.
2010-11-22 Tom Tromey <tromey@redhat.com>
* Makefile.in (.PRECIOUS): Reference ada-lex.c.
2010-11-19 Keith Seitz <keiths@redhat.com>
* data-directory/Makefile.in (SYSCALLS_INSTALL_DIR):
Remove extraneous '/' after $(DESTDIR).
(PYTHON_INSTALL_DIR): Likewise.
2010-11-19 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix stale memory references.
* elfread.c (elf_symfile_read): Replace xmalloc by bfd_alloc, drop
xfree, new comment.
2010-11-19 Jan Kratochvil <jan.kratochvil@redhat.com>
Tom Tromey <tromey@redhat.com>
* Makefile.in (.y.c): Directly create $@ from YLWRAP.
(.PHONY): Remove for .y outputs.
2010-11-19 Will Drewry <wad@google.com>
Tavis Ormandy <taviso@google.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf2read.c (decode_locdesc): Enforce location description stack
boundaries.
2010-11-18 Pierre Muller <muller@ics.u-strasbg.fr>
* arm-tdep.c (arm_in_function_epilogue_p): Fix code when "MOV SP"
instruction is found.
2010-11-17 Tom Tromey <tromey@redhat.com>
* value.c (value_entirely_optimized_out): Check the
'check_any_valid' field.
2010-11-16 Jan Kratochvil <jan.kratochvil@redhat.com>
* ada-lang.c (modify_general_field): Remove.
(make_array_descriptor): Replace all modify_general_field calls by
modify_field.
* value.c (modify_field): Update comment. New variable bytesize.
Normalize BITPOS. Initialize BYTESIZE, use it.
2010-11-16 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf2read.c (dw2_forget_cached_source_info): Clear the FULL_NAMES
elements after xfree.
2010-11-16 Tom Tromey <tromey@redhat.com>
* gdb-add-index.sh: Really remove.
2010-11-16 Jan Kratochvil <jan.kratochvil@redhat.com>
Code cleanup.
* dwarf2read.c (alloc_one_comp_unit): Rename prototype to ...
(init_one_comp_unit): ... this one.
(prepare_one_comp_unit): New prototype.
(dw2_require_line_header, process_psymtab_comp_unit): Use
init_one_comp_unit.
(process_psymtab_comp_unit): Use prepare_one_comp_unit.
(load_partial_comp_unit): Remove variable attr. Use
init_one_comp_unit with xmalloc. Use prepare_one_comp_unit.
(load_full_comp_unit): Use init_one_comp_unit with xmalloc. Use
prepare_one_comp_unit.
(read_signatured_type): Remove variable attr. Use init_one_comp_unit.
Use prepare_one_comp_unit.
(alloc_one_comp_unit): Rename to ...
(init_one_comp_unit): ... here and remove there calloc, new parameter
cu.
(prepare_one_comp_unit): New function.
2010-11-14 Pierre Muller <muller@ics.u-strasbg.fr>
* arm-tdep.c (arm_in_function_epilogue_p): Fix code to avoid
possible used of uninitialized variable.
2010-11-12 Nathan Froyd <froydnj@codesourcery.com>
* rs6000-tdep.c (bfd_uses_spe_extensions): New function.
(rs6000_gdbarch_init): Call it.
2010-11-12 Nathan Froyd <froydnj@codesourcery.com>
* rs6000-tdep.c (gdb_print_insn_powerpc): Disassemble e500
instructions if debugging an E500 binary.
2010-11-12 Tom Tromey <tromey@redhat.com>
* varobj.c (value_get_print_value): Rearrange. Pass stream to
apply_varobj_pretty_printer.
* c-lang.c: Include exceptions.h.
(c_get_string): Throw MEMORY_ERROR when appropriate.
* python/py-prettyprint.c (enum string_repr_result): New.
(print_stack_unless_memory_error): New function.
(print_string_repr): Change return type. Use
print_stack_unless_memory_error.
(print_children): Use print_stack_unless_memory_error.
(apply_val_pretty_printer): Update. Don't print children if
string representation threw an exception.
(apply_varobj_pretty_printer): Add 'stream' argument. Use
print_stack_unless_memory_error.
* python/python.c (gdbpy_gdb_error, gdbpy_gdb_memory_error): New
globals.
(_initialize_python): Initialize them.
* python/python-internal.h (GDB_PY_HANDLE_EXCEPTION): Use
gdbpy_convert_exception.
(GDB_PY_SET_HANDLE_EXCEPTION): Likewise.
(gdbpy_gdb_error, gdbpy_gdb_memory_error): Declare.
(gdbpy_convert_exception): Declare.
(apply_varobj_pretty_printer): Update.
* python/py-utils.c (gdbpy_convert_exception): New function.
2010-11-12 Marc Khouzam <marc.khouzam@ericsson.com>
* mi/mi-main.c (mi_cmd_target_detach): Accept new
thread-group id format.
2010-11-12 Jan Kratochvil <jan.kratochvil@redhat.com>
* spu-tdep.c (spu_catch_start): Fix compilation error typo.
2010-11-11 Phil Muldoon <pmuldoon@redhat.com>
* python/py-breakpoint.c (BPPY_REQUIRE_VALID): Check if bp is
NULL.
(BPPY_SET_REQUIRE_VALID): Ditto.
(bpnum_is_valid): Delete function.
(bppy_get_visibility): New function.
(bppy_new): Parse for, and validate internal keyword. Pass
internal keyword to breakpoint or watchpoint functions.
(build_bp_list): New function.
(gdbpy_breakpoints): Rewrite. Use build_bp_list and
iterate_over_breakpoints.
(gdbpy_breakpoint_created): Rewrite. Do not store breakpoints in a
look-aside vector.
(gdbpy_breakpoint_deleted): Rewrite, defer breakpoint management
to internal breakpoint chain.
* breakpoint.c (set_breakpoint_number): New function.
(breakpoint_1): Check if breakpoint number is more than zero.
(set_raw_breakpoint_without_location): Set py_bp_object to NULL.
(create_breakpoint_sal): Take a new parameter called internal.
Call set_breakpoint_number with internal parameter. Do not
mention internal breakpoints. All callers updated.
(create_breakpoint): Ditto.
(create_breakpoints_sal): Ditto.
(watch_command_1): Ditto.
(watch_command_wrapper): Take a new parameter called internal.
All callers updated.
(rwatch_command_wrapper): Ditto.
(awatch_command_wrapper): Ditto.
(save_breakpoints): Update breakpoint save condition check.
(iterate_over_breakpoints): New function.
* breakpoint.h: Add conditional python includes. Add py_bp_object
and comment to struct breakpoint. Update all callers.
* defs.h: Add PyObject definition for GDB builds without Python.
2010-11-10 Doug Evans <dje@google.com>
* python/lib/gdb/command/pretty_printers.py
(do_enable_pretty_printer_1): Handle printer.subprinters is None.
* value.c (set_value_enclosing_type): Renamed from
value_change_enclosing_type. All callers updated.
* value.h (set_value_enclosing_type): Update.
* valops.c (value_full_object): Always return a copy if we need to
make changes to the input value.
2010-11-09 Pedro Alves <pedro@codesourcery.com>
* breakpoint.c (watch_command_1): Get a pointer of the lazy
version of the expression's value, even if reading the value from
memory fails. When creating a -location watchpoint, get the
value's address from the lazy value pointer.
2010-11-07 Jan Kratochvil <jan.kratochvil@redhat.com>
* infrun.c (restore_inferior_thread_state): Use
discard_inferior_thread_state to free the data.
(discard_inferior_thread_state): xfree also siginfo_data.
2010-11-05 Doug Evans <dje@google.com>
Make gdb.parameter("directories") work.
New command "set directories".
* NEWS: Document them.
* source.c (set_directories_command): New function.
(show_directories_1): Renamed from show_directories.
All callers updated.
(show_directories_command): New function.
(_initialize_source): Install "directories" as a set/show
variable instead of just a show command.
2010-11-05 Ken Werner <ken.werner@de.ibm.com>
* NEWS: Mention OpenCL C language support.
* Makefile.in (SFILES): Add opencl-lang.c.
(COMMON_OBS): Add opencl-lang.o.
* opencl-lang.c: New File
* defs.h (enum language): Add language_opencl.
* dwarf2read.c (read_file_scope): Handle DW_AT_producer for the
IBM XL C OpenCL compiler.
* c-lang.h: Include "parser-defs.h".
(evaluate_subexp_c): Declare.
* c-lang.c (evaluate_subexp_c): Remove the static qualifier.
(c_op_print_tab): Add declaration.
* eval.c (binop_promote): Handle language_opencl.
* c-exp.y: Lookup the primitive types instead of referring to the
builtins.
2010-11-05 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix configure --enable-plugins --without-python.
* configure.ac (for ELF support in BFD) <"$plugins" = "yes">: New.
* configure: Regenerate.
2010-11-05 Jan Kratochvil <jan.kratochvil@redhat.com>
* solib.c (solib_read_symbols): Call exception_fprintf even without
FROM_TTY. Print also so->so_name.
2010-11-04 Sami Wagiaalla <swagiaal@redhat.com>
* gdbtypes.h (struct rank): Created subrank.
* gdbtypes.c: Initialized subrank for all
'BADNESS' constants.
(distance_to_ancestor): New function.
(is_ancestor): Use distance_to_ancestor.
(is_public_ancestor): Ditto.
(sum_ranks): Handle subrank.
(compare_ranks): Ditto.
(rank_one_type): Subrank base conversions.
2010-11-04 Sami Wagiaalla <swagiaal@redhat.com>
* gdbtypes.h: Create struct rank.
Convert all 'BADNESS' macros to const struct rank declarations.
(sum_ranks): New function.
(compare_ranks): New function.
* valops.c (find_oload_champ): Updated.
(classify_oload_match): Use compare_ranks.
Improved comments.
(compare_parameters): Use compare_ranks.
* gdbtypes.c: Initialize 'BADNESS' constants.
(sum_ranks): New function.
(compare_ranks): New function.
(compare_badness): Use compare_ranks.
(rank_function): Use global constants instead of literals.
(rank_one_type): Ditto.
Return struct rank.
Use sum_ranks.
2010-11-04 Doug Evans <dje@google.com>
* python/py-prettyprint.c (find_pretty_printer_from_gdb): Fix comment.
(find_pretty_printer): Fix comments.
2010-11-04 Hui Zhu <teawater@gmail.com>
* tracepoint.c (remote_trace_set_readonly_regions): Change lma to vma.
2010-11-03 Joel Brobecker <brobecker@adacore.com>
* ada-valprint.c (ada_val_print_array): Move variables `eltlen'
and `len' declaration and computation inside block where they
are being used.
2010-11-03 Joel Brobecker <brobecker@adacore.com>
* valprint.c (val_print_array_elements): Put back handling of
empty arrays.
2010-11-03 Ken Werner <ken.werner@de.ibm.com>
* dwarf2read.c (read_array_type): Read the DW_AT_byte_size from the
DIE and set the length of the type.
* gdbtypes.h (get_array_bounds): Move here from valprint.h.
* gdbtypes.c (get_array_bounds): Move here from valprint.c and
return 0 if the corresponding bounds of the type are undefined.
* valprint.h (get_array_bounds): Move declaration to gdbtypes.h.
* valprint.c (get_array_bounds): Move implementation to gdbtypes.c.
(val_print_array_elements): Use get_array_bounds to compute the number
of array elements instead of dividing the length of the array by the
length of the element types.
* valarith.c (vector_binop): Likewise.
* valops.c (value_cast): Likewise.
* c-valprint.c (c_val_print): Likewise.
* c-typeprint.c (c_type_print_varspec_suffix): Likewise.
2010-11-03 Ken Werner <ken.werner@de.ibm.com>
* valarith.c (value_pos, value_neg, value_complement): Handle
vector types.
* valops.c (value_one): Likewise.
2010-11-03 Ken Werner <ken.werner@de.ibm.com>
* value.h (value_non_lval): Declare.
* value.c (value_non_lval): New function.
* eval.c (evaluate_subexp_standard) <UNOP_POSTINCREMENT,
UNOP_POSTDECREMENT>: Call value_non_lval to ensure to return a
non-lvalue.
2010-11-02 Doug Evans <dje@google.com>
New python module gdb.printing, and new commands info pretty-printer,
enable pretty-printer, disable pretty-printer.
* NEWS: Mention them.
* data-directory/Makefile.in (PYTHON_FILES): Add gdb/printing.py,
gdb/command/__init__.py, gdb/command/pretty_printers.py.
* python/lib/gdb/__init__.py: Install pretty-printer commands.
* python/lib/gdb/printing.py: New file.
* python/lib/gdb/command/__init__.py: New file.
* python/lib/gdb/command/pretty_printers.py: New file.
2010-11-02 Tom Tromey <tromey@redhat.com>
* NEWS: Mention Guile removal.
* defs.h (enum language) <language_scm>: Remove.
* Makefile.in (SFILES): Remove scm-exp.c, scm-lang.c,
scm-valprint.c.
(HFILES_NO_SRCDIR): Remove scm-lang.h, scm-tags.h.
(COMMON_OBS): Remove scm-exp.o, scm-lang.o, scm-valprint.o.
* scm-exp.c, scm-lang.c, scm-valprint.c, scm-lang.h, scm-tags.h:
Remove.
2010-11-02 Doug Evans <dje@google.com>
* top.c: #include "python/python.h".
(gdb_init): Add a comment regarding initialize_all_files.
Call finish_python_initialization at the end.
* python/python.h (finish_python_initialization): Declare.
* python/python.c (finish_python_initialization): New function.
(_initialize_python): Move python-implemented initialization there
and call it.
(GdbMethods): Use #ifdef HAVE_PYTHON for consistency.
2010-11-02 Jan Kratochvil <jan.kratochvil@redhat.com>
Revert:
2010-10-17 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <pedro@codesourcery.com>
* gdbthread.h (currently_stepping): New declaration.
* infrun.c (currently_stepping): Remove the forward declaration.
(currently_stepping): Make it global.
* linux-nat.c (resume_callback) <lp->stopped && lp->status == 0>: New
variables tp and step, initialized them. Pass STEP to to_resume.
Print also possibly "PTRACE_SINGLESTEP" if STEP. Initialize LP->STEP.
* remote.c (currently_stepping_callback): New.
(remote_vcont_resume)
<ptid_equal (ptid, minus_one_ptid) || ptid_is_pid (ptid)>:
New variable tp. Call currently_stepping_callback and step such
thread.
2010-11-01 Hui Zhu <teawater@gmail.com>
* tracepoint.c (tfile_xfer_partial): Change lma to vma.
2010-10-28 Hui Zhu <teawater@gmail.com>
* tracepoint.c (trace_save): Change utp->actions to
utp->step_actions.
2010-10-26 Joel Brobecker <brobecker@adacore.com>
* (_FILE_OFFSET_BITS): Fix typo in comment.
2010-10-26 Joel Brobecker <brobecker@adacore.com>
* python/python-internal.h (_FILE_OFFSET_BITS): Undefine.
(PyEval_InitThreads): Remove duplicate. Define as nothing.
(PyEval_ReleaseLock): Define as nothing.
2010-10-26 Joel Brobecker <brobecker@adacore.com>
* dwarf2read.c (psymtab_include_file_name): Replace call to strcmp
by call to FILENAME_CMP.
2010-10-26 Joel Brobecker <brobecker@adacore.com>
* dictionary.c (dict_hash): Move assignment out of if condition.
2010-10-22 Jie Zhang <jie@codesourcery.com>
* Makefile.in (install): Remove dependency of install-only and
recursively invoke make for install-only.
* data-directory/Makefile.in: Add FLAGS_TO_PASS variable.
(install): Pass FLAGS_TO_PASS when recursively make install-only.
2010-10-20 Hui Zhu <teawater@gmail.com>
* tracepoint.c (tfile_get_traceframe_address): Call
extract_signed_integer.
(tfile_trace_find): Call extract_signed_integer and
extract_unsigned_integer. Change data_size to unsigned int.
(tfile_fetch_registers): Call extract_unsigned_integer.
(tfile_xfer_partial): Ditto.
(tfile_get_trace_state_variable_value): Call
extract_signed_integer and extract_unsigned_integer.
2010-10-20 Vladimir Prus <vladimir@codesourcery.com>
* remote.c (remote_get_threadlist): If we got empty
response, bail out immediately, and don't emit any
warnings.
2010-10-19 Ulrich Weigand <uweigand@de.ibm.com>
* arm-tdep.c (thumb_get_next_pc_raw): Handle Thumb-16 encoding
for "mov pc, REG" as well.
(thumb_instruction_changes_pc): Likewise.
2010-10-19 Sami Wagiaalla <swagiaal@redhat.com>
PR C++/11500:
* valarith.c (value_x_unop): Handle STRUCTOP_PTR.
* eval.c (evaluate_subexp_standard): Check for overload of
'operator->'.
* valarith.c (value_x_binop): Throw NOT_FOUND_ERROR.
(value_x_unop): Ditto.
* valops.c: Include "exceptions.h".
(find_overload_match): Throw NOT_FOUND_ERROR.
(value_struct_elt): Ditto.
2010-10-19 Tom Tromey <tromey@redhat.com>
* python/py-cmd.c (cmdpy_function): Unreference exception state.
2010-10-19 Sami Wagiaalla <swagiaal@redhat.com>
* gdbtypes.h: Introduce BOOL_PTR_CONVERSION_BADNESS.
* gdbtypes.c (rank_one_type): Use BOOL_PTR_CONVERSION_BADNESS
for conversion.
Make all other conversions illegal.
2010-10-18 Doug Evans <dje@google.com>
* c-typeprint.c (c_type_print_base, case TYPE_CODE_TYPEDEF): Verify
assumptions of when this case happens. Print "<unnamed typedef>".
2010-10-18 Tom Tromey <tromey@redhat.com>
* valprint.c (val_print_string): Pass 'encoding' to
LA_PRINT_STRING.
2010-10-17 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix the `stopped language detection' testcase for gcc-4.5.
* dwarf2read.c (read_partial_die): Set also LANGUAGE_OF_MAIN.
* symfile.c (set_initial_language): Move variable filename to a more
inner block. Prefer LANGUAGE_OF_MAIN.
* symtab.c (language_of_main): New variable.
(set_main_name): Always reset LANGUAGE_OF_MAIN.
* symtab.h (language_of_main): New declaration.
2010-10-17 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <pedro@codesourcery.com>
* gdbthread.h (currently_stepping): New declaration.
* infrun.c (currently_stepping): Remove the forward declaration.
(currently_stepping): Make it global.
* linux-nat.c (resume_callback) <lp->stopped && lp->status == 0>: New
variables tp and step, initialized them. Pass STEP to to_resume.
Print also possibly "PTRACE_SINGLESTEP" if STEP. Initialize LP->STEP.
* remote.c (currently_stepping_callback): New.
(remote_vcont_resume)
<ptid_equal (ptid, minus_one_ptid) || ptid_is_pid (ptid)>:
New variable tp. Call currently_stepping_callback and step such
thread.
2010-10-17 Jan Kratochvil <jan.kratochvil@redhat.com>
* infrun.c (follow_exec): Replace symbol_file_add_main by
symbol_file_add with SYMFILE_DEFER_BP_RESET, set_initial_language and
breakpoint_re_set.
* m32r-rom.c (m32r_load, m32r_upload_command): Use parameter 0 for
clear_symtab_users.
* objfiles.c (free_all_objfiles): Likewise.
* remote-m32r-sdi.c (m32r_load): Likewise.
* solib-som.c (som_solib_create_inferior_hook): Likewise.
* symfile.c (new_symfile_objfile): New comment for add_flags. Call
clear_symtab_users with ADD_FLAGS.
(reread_symbols): Use parameter 0 for clear_symtab_users.
(clear_symtab_users): New parameter add_flags. Do not call
breakpoint_re_set if SYMFILE_DEFER_BP_RESET.
(clear_symtab_users_cleanup): Use parameter 0 for clear_symtab_users.
* symtab.h (clear_symtab_users): New parameter add_flags.
2010-10-17 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix GCC false warning.
* varobj.c (value_get_print_value) <str_addr>: Initialize it.
2010-10-16 Pierre Muller <muller@ics.u-strasbg.fr>
* p-typeprint.c (pascal_type_print_method_args): Fix problem in
display of type of method arguments.
2010-10-15 Tom Tromey <tromey@redhat.com>
PR python/11948:
* varobj.c (value_get_print_value): Use val_print_string to print
lazy strings.
* python/py-prettyprint.c (print_string_repr): Use
val_print_string to print lazy strings. Fix cleanup logic.
(print_children): Likewise.
* python/python-internal.h (gdbpy_extract_lazy_string): Update.
* python/py-lazy-string.c (gdbpy_extract_lazy_string): Rewrite.
Change return type to 'void', add 'addr' argument.
* value.h (val_print_string): Update.
* valprint.c (val_print_string): Add 'encoding' argument.
* printcmd.c (print_formatted): Update.
* p-valprint.c (pascal_val_print): Update.
* m2-valprint.c (print_unpacked_pointer): Update.
(m2_print_array_contents): Likewise.
* jv-valprint.c (java_value_print): Update.
* f-valprint.c (f_val_print): Update.
* c-valprint.c (c_val_print): Update.
* auxv.c (fprint_target_auxv): Update.
2010-10-15 Doug Evans <dje@google.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
PR exp/12117
* gdbtypes.c (check_typedef): Clean up function comment.
Keep track of instance flags as we strip typedefs and create a new
type to preserve them if necessary.
* gdbtypes.h (type) <instance_flags>: Extend the comment.
2010-10-15 Pierre Muller <muller@ics.u-strasbg.fr>
* p-lang.c (is_pascal_string_type): Use TYPE_FIELD_NAME accessor.
2010-10-14 Sami Wagiaalla <swagiaal@redhat.com>
* gdbtypes.h: Create BASE_PTR_CONVERSION_BADNESS.
* gdbtypes.c (rank_one_type): Move type comparison code out of here
to...
(types_equal): ...here. And changed it as follows:
Outside of typedefs type must be of the same TYPE_CODE.
When compairing two pointers or references they are equal if their
targets are equal.
Correct pointer conversions.
2010-10-14 Pierre Muller <muller@ics.u-strasbg.fr>
* p-lang.c (is_pascal_string_type): Avoid crashes on structures
having fields without names.
2010-10-13 Tom Tromey <tromey@redhat.com>
* language.h (LA_PRINT_ARRAY_INDEX): Fix argument name.
2010-10-13 Doug Evans <dje@google.com>
New python module gdb.types.
* NEWS: Document it.
* data-directory/Makefile.in (PYTHON_FILES): Add gdb/types.py.
* python/lib/gdb/types.py: New file.
* c-typeprint.c: Whitespace cleanup.
(cp_type_print_method_args): Remove unnecessary forward decl.
(cp_type_print_derivation_info): Ditto.
(c_type_print_varspec_prefix): Mark as static at definition.
(c_type_print_modifier): Fix arg descriptions.
2010-10-13 Jan Kratochvil <jan.kratochvil@redhat.com>
* python/py-breakpoint.c (bppy_set_condition): New comment.
* python/py-cmd.c (cmdpy_function): Call also gdbpy_print_stack for
failed PyUnicode_Decode.
(cmdpy_completer): Skip element for failed
python_string_to_host_string.
(cmdpy_init): Return -1 on failed python_string_to_host_string.
* python/py-frame.c (frapy_read_var): Extend the function comment.
* python/py-function.c (fnpy_init): Return -1 on failed
python_string_to_host_string.
* python/py-inferior.c (infpy_read_memory, infpy_write_memory): Extend
the function comment.
(infpy_search_memory): Extend the function comment. Remove the
PyErr_SetString call on already set error state.
* python/py-param.c (set_parameter_value): Extend the function
comment. Return -1 on failed python_string_to_host_string, twice.
(set_attr): Extend the function comment.
(compute_enum_values): Extend the function comment. New variable
back_to. Protect self->enumeration by BACK_TO cleanups. Return 0 on
failed python_string_to_host_string.
(get_doc_string): Call gdbpy_print_stack on failed
python_string_to_host_string.
(parmpy_init): Extend the function comment.
* python/py-prettyprint.c (pretty_print_one_value): Likewise.
(gdbpy_get_display_hint, print_children): Call gdbpy_print_stack on
failed python_string_to_host_string.
* python/py-value.c (valpy_new, valpy_getitem, valpy_call)
(valpy_binop, valpy_richcompare): Extend the function comment.
* python/python.c
(struct python_env) <error_type, error_value, error_traceback>: New
fields.
(restore_python_env): Handle PyErr_Occurred. Call PyErr_Restore.
(ensure_python_env): Call PyErr_Fetch.
* varobj.c (update_dynamic_varobj_children): Call gdbpy_print_stack on
failed convert_value_from_python.
(value_get_print_value): Call gdbpy_print_stack on failed
python_string_to_target_python_string.
2010-10-12 Tom Tromey <tromey@redhat.com>
* python/py-prettyprint.c (search_pp_list): Fix error checking.
2010-10-12 Sami Wagiaalla <swagiaal@redhat.com>
* gdbtypes.c (do_is_ancestor): New function.
(is_ancestor): Use do_is_ancestor.
(is_public_ancestor): Use do_is_ancestor.
2010-10-12 Pierre Muller <muller@ics.u-strasbg.fr>
* ser-go32.c (struct dos_ops): Add missing fdopen field.
2010-10-12 Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
* arm-tdep.c (arm_mode_strings): Add NULL entry at end of array.
2010-10-11 Doug Evans <dje@google.com>
* c-typeprint.c (c_type_print_modifier): Add note that this prints
the address space id too.
2010-10-11 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix attaching to re-prelinked executables on ppc64.
* solib-svr4.c (svr4_exec_displacement): New variable plt2_asect,
initialize it, try to adjust FILESZ field by it.
2010-10-08 Daniel Jacobowitz <dan@codesourcery.com>
* tracepoint.c (merge_uploaded_trace_state_variables): Only print
messages if info_verbose.
2010-10-08 Ken Werner <ken.werner@de.ibm.com>
* valops.c (value_cast): Handle vector types.
* valarith.c (value_binop): Widen scalar to vector if appropriate.
2010-10-08 Ulrich Weigand <uweigand@de.ibm.com>
* arm-tdep.c (thumb_expand_immediate): New function.
(thumb_instruction_changes_pc): Likewise.
(thumb2_instruction_changes_pc): Likewise.
(thumb_analyze_prologue): Handle 32-bit Thumb instructions during
prologue parsing. Improved support for optimized code.
(thumb_scan_prologue): Do not reply on line-number information,
use same heuristics as arm_scan_prologue insead.
(skip_prologue_function): Accept functions
"__tls_get_addr" and "__aeabi_read_tp".
2010-10-08 Ulrich Weigand <uweigand@de.ibm.com>
Daniel Jacobowitz <dan@codesourcery.com>
* arm-tdep.c (thumb_in_function_epilogue_p)
(arm_in_function_epilogue_p): New.
(arm_gdbarch_init): Install arm_in_function_epilogue_p as
gdbarch_in_function_epilogue_p callback.
2010-10-07 Doug Evans <dje@google.com>
* cc-with-index.sh (output_file): Default to a.out.
* dwarf2read.c (mapped_index): Rename member index_table to
symbol_table and index_table_slots to symbol_table_slots.
All uses updated.
(create_symbol_hash_table): Renamed from create_index_table.
All callers updated.
(add_indices_to_cpool): Rename arg index_table to symbol_hash_table.
(write_hash_table): Rename local index_table to symbol_hash_table.
* addrmap.h (addrmap_foreach_fn): New typedef.
(addrmap_foreach): Declare.
* addrmap.c (struct addrmap_funcs): New member foreach.
(addrmap_foreach): New function.
(addrmap_fixed_foreach): New function.
(addrmap_fixed_funcs): Update.
(struct mutable_foreach_data): New struct.
(addrmap_mutable_foreach_worker): New function.
(addrmap_mutable_foreach): New function.
(addrmap_mutable_funcs): Update.
2010-10-07 Paul Hilfinger <hilfinger@adacore.com>
* dictionary.c (dict_hash): Revert to msymbol_hash_iw in
more cases.
2010-10-07 Paul Hilfinger <hilfinger@adacore.com>
* ada-lang.c (full_match): Declare.
(ada_match_name): Rename to match_name (we should avoid prefixing static
symbols with "ada_").
(match_name): New name for ada_match_name.
(struct ada_psym_data): Remove and replace with...
(struct match_data): User data for map_matching_symbols.
(ada_add_psyms): Remove.
(aux_add_nonlocal_symbols): New function, used as callback for
map_matching_symbols.
(compare_names): Ordering function adopted from strcmp_iw for Ada-encoded
symbols.
(ada_add_non_local_symbols): Rename to add_nonlocal_symbols.
(add_nonlocal_symbols): Renamed from ada_add_non_local_symbols.
Rework to use map_matching_symbols instead of map_ada_symtabs.
(ada_lookup_symbol_list): Use add_nonlocal_symbols.
* psymtab.c: Include dependency on dictionary.h.
(match_partial_symbol): New function.
(ada_lookup_partial_symbol): Remove.
(map_block): New function, auxiliary to map_matching_symbols_psymtab.
(map_matching_symbols_psymtab): New function.
(psym_functions): Replace map_ada_symtabs with map_matching_symbols_psymtab.
* symfile.h: Replace map_ada_symtabs definition with map_matching_symbols.
2010-10-06 Paul Hilfinger <hilfinger@adacore.com>
* ada-lang.c (ada_match_name): Use new API for wild_match.
(wild_match): Change API to be consistent with that of strcmp_iw;
return 0 for a match, and switch operand order.
(full_match): New function.
(ada_add_block_symbols): Use dict_iter_match_{first,next} for
matching to allow use of hashing.
* dictionary.c (struct dict_vector): Generalize iter_name_first,
iter_name_next ot iter_match_first, iter_match_next.
(iter_name_first_hashed): Replace with iter_match_first_hashed.
(iter_name_next_hashed): Replace with iter_match_next_hashed.
(iter_name_first_linear): Replace with iter_match_first_linear.
(iter_name_next_linear): Replace with iter_match_next_linear.
(dict_iter_name_first): Re-implement to use dict_iter_match_first.
(dict_iter_name_next): Re-implement to use dict_iter_match_next.
(dict_iter_match_first): New function.
(dict_iter_match_next): New function.
(dict_hash): New function.
* dictionary.h (dict_iter_match_first, dict_iter_match_next): Declare.
* psymtab.c (ada_lookup_partial_symbol): Use new wild_match API.
2010-10-06 Doug Evans <dje@google.com>
* data-directory/Makefile.in: Remove @host_makefile_frag@, @frags@.
2010-10-06 Ken Werner <ken.werner@de.ibm.com>
* dwarf2read.c (read_tag_const_type): Handle const arrays.
2010-10-06 Doug Evans <dje@google.com>
* Makefile.in (REQUIRED_SUBDIRS): New var.
(subdir_do): Verify required subdir Makefiles exist.
Create subdir data-directory.
* Makefile.in (XML_SYSCALL_DIR, XML_SYSCALL_FILES): Moved to
data-directory/Makefile.in.
(SUBDIRS): Add data-directory.
(all): Remove xml-syscall-copy dependency.
(xml-syscall-copy): Moved to data-directory/Makefile.in as
stamp-syscalls.
(xml-syscall-install): Moved to data-directory/Makefile.in as
install-syscalls.
(install-only): Remove xml-syscall-install dependency.
(all-data-directory): New rule.
(data-directory/Makefile): New rule.
* configure.ac (AC_OUTPUT): Add data-directory/Makefile.
* configure: Regenerate.
* data-directory/Makefile.in: New file.
* python/lib/gdb/__init__.py: New file.
2010-10-06 Joel Brobecker <brobecker@adacore.com>
Fix ARI warnings in advance_wild_match.
* ada-lang.c (advance_wild_match): Delete local variable t2.
Adjust code accordingly. Minor reformatting.
2010-10-06 Ken Werner <ken.werner@de.ibm.com>
* gdbtypes.h (struct main_type): Remove flag_nottext.
(enum type_flag_value): Remove TYPE_FLAG_NOTTEXT.
(enum type_instance_flag_value): Add TYPE_INSTANCE_FLAG_NOTTEXT.
(TYPE_NOTTEXT): Use TYPE_INSTANCE_FLAG_NOTTEXT instead of flag_nottext.
* gdbtypes.c (make_vector_type): Use TYPE_INSTANCE_FLAG_NOTTEXT instead
of TYPE_FLAG_NOTTEXT.
(init_type): Remove the initialization of the flag_nottext field.
(gdbtypes_post_init): Use TYPE_INSTANCE_FLAG_NOTTEXT instead of
TYPE_FLAG_NOTTEXT.
* c-valprint.c (c_val_print): Remove TYPE_VECTOR check.
2010-10-04 Doug Evans <dje@google.com>
* cc-with-index.sh: New file.
* dwarf2read.c (dw2_do_instantiate_symtab): Insert blank line after
function comment.
(dw2_instantiate_symtab, dw2_get_cu, extract_cu_value): Ditto.
(create_cus_from_index, create_addrmap_from_index): Ditto.
(mapped_index_string_hash, find_slot_in_mapped_hash): Ditto.
(dw2_setup, dw2_require_line_header, dw2_require_full_path): Ditto.
(dw2_do_expand_symtabs_matching): Ditto.
(eq_strtab_entry, create_strtab, add_string): Ditto.
(hash_strtab_entry): Ditto.
(hash_symtab_entry, eq_symtab_entry, delete_symtab_entry): Ditto.
(create_index_table, create_mapped_symtab, find_slot): Ditto.
(hash_expand, add_index_entry, add_indices_to_cpool): Ditto.
(write_hash_table, add_address_entry, write_psymbols): Ditto.
(write_obstack, unlink_if_set, write_one_signatured_type): Ditto.
(write_psymtabs_to_index): Ditto.
2010-10-04 Joel Brobecker <brobecker@adacore.com>
* ada-lang.c: #include "value.h".
(ensure_lval): Delete advance declaration. Remove gdbarch and sp
arguments. Implement using value_allocate_space_in_inferior
instead of allocating memory from the stack.
(make_array_descriptor): Remove gdbarch and sp parameters. Update
calls to ensure_lval.
(ada_convert_actual): Remove gdbarch and sp parameters. Update
calls to make_array_descriptor and ensure_lval.
* ada-lang.h (ada_convert_actual): Update declaration.
* infcall.c (value_arg_coerce): Update call to ada_convert_actual.
2010-10-04 Doug Evans <dje@google.com>
* python/python.c (_initialize_python): Define new function
GdbSetPythonDirectory in python. Use it to update sys.path and
gdb.__path__.
2010-10-03 Paul Hilfinger <hilfinger@adacore.com>
* gdb/ada-typeprint.c (print_selected_record_field_types): New function,
incorporating and generalizing print_record_field_types.
(print_record_field_types): Change return value and update comment.
Re-implement using print_selected_record_field_types.
(print_choices): Print "=>" here.
Handle case of unencoded variant branch.
(print_variant_clauses): Reformat comment.
Special-case unencoded variant branch.
2010-10-03 Paul Hilfinger <hilfinger@adacore.com>
* ada-lang.c (wild_match): Reimplement.
Change API to eliminate unused length argument, reverse arguments and
make 0 the 'true' return value.
(advance_wild_match): New auxiliary function for wild_match to improve
readability.
(ada_match_name, ada_add_block_symbols): Use new API for wild_match.
* psymtab.c (ada_lookup_partial_symbol, map_ada_symtabs): Use new
API for wild_match.
* symfile.h (map_ada_symtabs): Modify declaration to use new API for
wild_match.
* dwarf2read.c (dw2_map_ada_symtabs): Ditto.
2010-10-01 Doug Evans <dje@google.com>
* dwarf2read.c (_initialize_dwarf2_read): Add usage info to help text
for `save gdb-index' command.
2010-10-01 Tom Tromey <tromey@redhat.com>
* symfile.h (allocate_symtab): Update.
* symfile.c (allocate_symtab): Make 'filename' const.
* psymtab.c (add_psymbol_to_bcache): Make 'name' const.
(add_psymbol_to_list): Likewise.
* psympriv.h (struct partial_symtab) <filename, dirname>: Now
const.
(add_psymbol_to_list): Update.
* mdebugread.c (new_symtab): Make 'name' const.
(psymtab_to_symtab_1): Make 'filename' const.
* elfread.c (elfstab_offset_sections): Update.
* dwarf2read.c (dwarf_decode_lines): Make 'comp_dir' const.
(dwarf2_start_subfile): Make 'dirname' and 'comp_dir' const.
(psymtab_include_file_name): Update.
* dbxread.c (find_stab_function_addr): Make 'filename' const.
* buildsym.h (start_subfile): Update.
* buildsym.c (start_subfile): Make arguments const.
2010-09-30 Ali Lakhia <lakhia@alumni.utexas.net>
* fork-child.c (breakup_args): Fix crash if shell forking is
disabled at compile time.
2010-10-01 Joel Brobecker <brobecker@adacore.com>
* ada-lang.c (desc_bounds): Add handling of the case where
the P_BOUNDS field is a pointer to a stub.
(desc_data_target_type): Same for P_ARRAY field.
(ada_check_typedef): Strip the typedef layers from the type
found by ada_find_any_type.
2010-10-01 Joel Brobecker <brobecker@adacore.com>
* sparc-tdep.c (sparc32_frame_align): New function.
(sparc32_gdbarch_init): Set the frame_align gdbarch method.
* sparc64-tdep.c (sparc64_frame_align): New function.
(sparc64_gdbarch_init): Set the frame_align gdbarch method.
2010-09-30 H.J. Lu <hongjiu.lu@intel.com>
* defs.h (MAX_REGISTER_SIZE): Set to 64.
2010-09-30 Tom Tromey <tromey@redhat.com>
* symfile.h (struct sym_fns) <next>: Remove.
(add_symtab_fns): Update.
* symfile.c (sym_fns_ptr): New typedef.
(symtab_fns): Now a VEC.
(add_symtab_fns): Update. Change argument type.
(find_sym_fns): Update. Change return type.
(get_symfile_segment_data): Update.
* objfiles.h (struct objfile) <sf>: Now const.
* somread.c (som_sym_fns): Now const. Update.
* xcoffread.c (xcoff_sym_fns): Now const. Update.
* mipsread.c (ecoff_sym_fns): Now const. Update.
* machoread.c (macho_sym_fns): Now const. Update.
* elfread.c (elf_sym_fns): Now const. Update.
(elf_sym_fns_gdb_index): Likewise.
* dbxread.c (aout_sym_fns): Now const. Update.
* coffread.c (coff_sym_fns): Now const. Update.
2010-09-30 Tom Tromey <tromey@redhat.com>
* value.c (value_primitive_field): Take 'offset' into account for
packed field.
2010-09-30 Tom Tromey <tromey@redhat.com>
* completer.c (count_struct_fields): Handle anonymous structs and
unions.
(add_struct_fields): Likewise.
2010-09-30 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix printing parameters of inlined functions.
* ada-lang.c (is_known_support_routine)
(ada_unhandled_exception_name_addr_from_raise): Provide NULL parameter
for find_frame_funname.
* python/py-frame.c (frapy_name): Likewise.
* stack.c (find_frame_funname): New parameter funcp. Update the
function comment. Fill it in.
(print_frame): New variable func. Initialize it by
find_frame_funname. Print arguments only if FUNC is not NULL. Use
FUNC as the parameter of print_args_stub.
* stack.h (find_frame_funname): New parameter funcp. Remove the
function declaration comment.
2010-09-30 Jan Kratochvil <jan.kratochvil@redhat.com>
PR corefiles/12071.
* inferior.c (have_live_inferiors): New variables old_chain, inf and
tp. Iterate INFERIOR_LIST and call target_has_execution.
2010-09-29 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix GDB crash on inferior calls with self-referencing classes.
* gnu-v3-abi.c (gnuv3_pass_by_reference): Do not call itself on static
member fields.
2010-09-29 Doug Evans <dje@google.com>
Workaround for gcc/45682.
* dwarf2read.c (partial_die_info): New fields fixup_called,
linkage_name.
(guess_partial_die_structure_name): Renamed from guess_structure_name.
Move definition next to use. Use linkage_name to determine if class
is in a namespace. All callers updated.
(fixup_partial_die): Return early if already called.
Set fixup_called when done.
(guess_full_die_structure_name): New function.
(determine_prefix): Call it for class/struct/union dies if c++ and
.debug_types section is present and parent is DW_TAG_compile_unit.
2010-09-28 Joel Brobecker <brobecker@adacore.com>
* configure.tgt (sparc-*-*): Set gdb_sim to ../sim/erc32/libsim.a.
(sparc-*-rtems*): Delete. Now redundant with sparc-*-*.
2010-09-28 Joel Brobecker <brobecker@adacore.com>
* NEWS: Announce Ravenscar Profile support.
2010-09-28 Joel Brobecker <brobecker@adacore.com>
Jerome Guitton <guitton@adacore.com>
* ravenscar-thread.c, ravenscar-thread.h, ravenscar-sparc-thread.c:
New files.
* configure.tgt (sparc-*-*): Add ravenscar-thread.o and
ravenscar-sparc-thread.o to gdb_target_obs.
2010-09-28 Joel Brobecker <brobecker@adacore.com>
* ada-tasks.c (iterate_over_live_ada_tasks): New function.
* ada-lang.h (iterate_over_live_ada_tasks): Declare.
2010-09-27 Pierre Muller <muller@ics.u-strasbg.fr>
* amd64-windows-tdep.c (amd64_skip_main_prologue): New function.
(amd64_windows_init_abi): Register amd64_skip_main_prologue as gdbarch
skip_main_prologue method.
2010-09-27 Tom Tromey <tromey@redhat.com>
* dwarf2read.c (dwarf2_read_index): Only allow version 3.
(write_psymbols): Add 'psyms_seen' and 'is_static' arguments.
Only emit a given psymbol once.
(struct signatured_type_index_data) <psyms_seen>: New field.
(write_one_signatured_type): Update.
(cleanup_htab): New function.
(write_psymtabs_to_index): Update. Create psyms_seen hash. Bump
version to 3.
(save_gdb_index_command): Update index documentation.
2010-09-27 Tom Tromey <tromey@redhat.com>
* bcache.c (expand_hash_table): Use hash_function, not hash.
2010-09-27 Tom Tromey <tromey@redhat.com>
* gdb_wchar.h: Change minimum libiconv to 0x108.
2010-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix lost siginfo_t for inferior calls.
* infrun.c
(struct inferior_thread_state) <siginfo_gdbarch, siginfo_data>: New.
(save_inferior_thread_state): New variables regcache, gdbarch and
siginfo_data. Initialize SIGINFO_DATA if gdbarch_get_siginfo_type_p.
Move INF_STATE allocation later, pre-clear it. Initialize REGISTERS
using REGCACHE.
(restore_inferior_thread_state): New variables regcache and gdbarch.
Restore SIGINFO_DATA for matching GDBARCH. Restore REGISTERS using
REGCACHE. Free also SIGINFO_DATA.
2010-09-24 Tom Tromey <tromey@redhat.com>
* dwarf2read.c (dw2_expand_symtabs_matching): Add missing
MAYBE_SWAPs.
(dw2_map_symbol_names): Likewise.
2010-09-24 Sami Wagiaalla <swagiaal@redhat.com>
* valops.c (find_oload_champ_namespace_loop): replace incorrect
discard_cleanups do_cleanups.
2010-09-24 Pedro Alves <pedro@codesourcery.com>
PR gdb/11842
* amd64-linux-nat.c (compat_siginfo_from_siginfo)
(siginfo_from_compat_siginfo): Also copy si_pid and si_uid when
si_code is < 0. Check for si_code == SI_TIMER before checking for
si_code < 0.
2010-09-24 Pedro Alves <pedro@codesourcery.com>
* objfiles.h (ALL_OBJSECTIONS): Handle breaks in the inner loop.
2010-09-22 Joel Brobecker <brobecker@adacore.com>
* ada-tasks.c (read_atcb): Do not compute the task ptid when
debugging a core file.
2010-09-22 Jan Kratochvil <jan.kratochvil@redhat.com>
Code cleanup.
* objfiles.c (allocate_objfile) <objfile->name != NULL>: Remove.
(free_objfile) <objfile->name != NULL>: Remove the conditional around
xfree.
* objfiles.h (struct objfile) <name>: New comment it is never NULL.
* python/py-auto-load.c (auto_load_new_objfile) <!objfile->name>:
Remove.
* python/py-objfile.c (objfpy_get_filename) <obj->objfile->name>
Remove the conditional.
* python/py-progspace.c (pspy_get_filename) <objfile->name>: Likewise.
2010-09-22 Jan Kratochvil <jan.kratochvil@redhat.com>
* main.c: Include objfiles.h.
(captured_main): New variable objfile. Call
load_auto_scripts_for_objfile for ALL_OBJFILES.
2010-09-22 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf2read.c (die_needs_namespace) <DW_TAG_variable>: Add also
DW_TAG_constant.
2010-09-22 Joel Brobecker <brobecker@adacore.com>
* dwarf2read.c (scan_partial_symbols): Add handling of
DW_TAG_constant DIEs.
(add_partial_symbol, load_partial_dies, new_symbol): Likewise.
2010-09-22 Joel Brobecker <brobecker@adacore.com>
* configure.ac: Add support for --enable-gdbserver.
* configure: Regenerate.
2010-09-22 Sami Wagiaalla <swagiaal@redhat.com>
PR C++/12028
* valops.c (find_oload_champ_namespace_loop): removed incorrect
'old_cleanups' reassignment.
2010-09-16 Jan Kratochvil <jan.kratochvil@redhat.com>
* charset.c (wchar_iterate) <EILSEQ>: Return any possibly converted
characters.
2010-09-16 Phil Muldoon <pmuldoon@redhat.com>
PR mi/11407
* mi/mi-cmd-stack.c (list_args_or_locals): Catch exceptions from
read_var_value and common_val_print and print a warning.
2010-09-15 Jan Kratochvil <jan.kratochvil@redhat.com>
* MAINTAINERS (GLOBAL MAINTAINERS) <Jan Kratochvil>: Move the entry to
keep the list in alphabetical order. Use longer e-mail address.
2010-09-15 Tom Tromey <tromey@redhat.com>
* MAINTAINERS (GLOBAL MAINTAINERS): Add Jan Kratochvil.
2010-09-15 Tom Tromey <tromey@redhat.com>
* charset.c (iconv_open): New define.
(iconv): Likewise.
(iconv_close): Likewise.
(phony_iconv_open): Add "phony_" prefix.
(phony_iconv_close): Likewise.
(phony_iconv): Likewise.
* gdb_wchar.h: Check _LIBICONV_VERSION, __STDC_ISO_10646__.
Change how INTERMEDIATE_ENCODING is defined.
2010-09-15 Doug Evans <dje@google.com>
* dwarf2read.c (struct die_info): Fix comment.
2010-09-15 Alan Modra <amodra@gmail.com>
PR 4606
* gcore.c (gcore_create_callback): Clear SEC_HAS_CONTENTS rather
than setting SEC_NEVER_LOAD on sections that need not be copied.
2010-09-14 Tom Tromey <tromey@redhat.com>
* psympriv.h (add_psymbol_to_list, init_psymbol_list)
(start_psymtab_common, allocate_psymtab, discard_psymtab):
Declare.
* symfile.h (extend_psymbol_list): Remove.
(add_psymbol_to_list, init_psymbol_list, start_psymtab_common)
(allocate_psymtab, discard_psymtab): Move to psympriv.h.
* psymtab.c (extend_psymbol_list): Move earlier. Now static.
2010-09-14 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf2read.c (dw2_map_ada_symtabs): Remove the internal_error.
Update the comment.
2010-09-14 Tom Tromey <tromey@redhat.com>
PR symtab/8399:
* dwarf2loc.c (locexpr_describe_location_piece): Don't call error
for unrecognized frame base expression.
2010-09-14 Tom Tromey <tromey@redhat.com>
PR exp/11803:
* value.c (value_static_field): Use value_of_variable.
2010-09-14 Pierre Muller <muller@ics.u-strasbg.fr>
* m32r-rom.c: Replace winsock.h with winsock2.h header.
* remote-m32r-sdi.c: Replace winsock.h by winsock2.h.
2010-09-13 Sami Wagiaalla <swagiaal@redhat.com>
PR symtab/11992:
* c-exp.y (classify_name): Check is_a_member_of_this before returning
UNKNOWN_CPP_NAME.
2010-09-13 Joel Brobecker <brobecker@adacore.com>
* NEWS: Add x86-lynxos to the list of platforms supported by
gdbserver.
2010-09-13 Joel Brobecker <brobecker@adacore.com>
* NEWS: Announce GDBserver support for version 5.x of ppc-lynxos.
2010-09-13 Tom Tromey <tromey@redhat.com>
* Makefile.in (HFILES_NO_SRCDIR): Add progspace.h.
2010-09-13 H.J. Lu <hongjiu.lu@intel.com>
* i386-tdep.c (i386_ymm_type): Set type name to
builtin_type_vec256i.
2010-09-12 Michael Snyder <msnyder@vmware.com>
* i386-tdep.c (i386_gdbarch_init): Fix typo in comments.
2010-09-12 H.J. Lu <hongjiu.lu@intel.com>
* i386-tdep.c (i386_gdbarch_init): Fix typo in comments.
2010-09-11 H.J. Lu <hongjiu.lu@intel.com>
* amd64-tdep.c (amd64_register_name): Removed.
(amd64_init_abi): Don't call set_gdbarch_register_name.
* i386-tdep.c (i386_ymmh_regnum_p): Make it static.
* i386-tdep.h (i386_ymmh_regnum_p): Removed.
2010-09-11 Jan Kratochvil <jan.kratochvil@redhat.com>
Paul Bolle <pebolle@tiscali.nl>
Redirect also uiout and stdtarg{,err} in execute_command_to_string.
* cli-logging.c (struct saved_output_files) <targerr>: New.
(set_logging_redirect, pop_output_files, handle_redirections):
Redirect also gdb_stdtargerr.
* defs.h (struct ui_out, make_cleanup_ui_out_redirect_pop): New
declarations.
* event-top.c (gdb_setup_readline, gdb_disable_readline): Redirect
also gdb_stdtargerr.
* top.c (execute_command_to_string): Move make_cleanup_ui_file_delete
to the top. Redirect also gdb_stdlog, gdb_stdtarg and gdb_stdtargerr.
Use ui_out_redirect, register make_cleanup_ui_out_redirect_pop.
* tui/tui-io.c (tui_setup_io): Redirect also gdb_stdtargerr.
* utils.c (do_ui_out_redirect_pop, make_cleanup_ui_out_redirect_pop):
New functions.
2010-09-10 Pierre Muller <muller@ics.u-strasbg.fr>
* hppa-tdep.c (unwind_command): Use host_address_to_string function
to display a host address.
* monitor.c (monitor_read_memory): Likewise.
* xtensa-tdep.c (xtensa_push_dummy_call): Likewise.
2010-09-10 Pierre Muller <muller@ics.u-strasbg.fr>
* coffread.c (struct coff_symbol): Change c_value type from `long' to
`CORE_ADDRESS' as it might contain target addresses.
2010-09-10 Pierre Muller <muller@ics.u-strasbg.fr>
* alpha-mdebug-tdep.c (find_proc_desc): Use SYMBOL_VALUE_BYTES macro
before cast to pointer to avoid warning.
2010-09-09 Kevin Buettner <kevinb@redhat.com>
* v850-tdep.c (v850_gdbarch_init): Change the v850's `char'
type to be signed.
2010-09-09 Ulrich Weigand <uweigand@de.ibm.com>
* dwarf2read.c (fixup_partial_die): Do not set dummy name for
anonymous class partial DIEs.
2010-09-08 Daniel Jacobowitz <dan@codesourcery.com>
* dwarf2read.c (dwarf2_compute_name): Check that the first
argument is a pointer.
2010-09-08 Daniel Jacobowitz <dan@codesourcery.com>
* dwarf2read.c (read_func_scope, read_structure_type)
(read_common_block): Check for a NULL return from new_symbol.
2010-09-08 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf2read.c (dwarf2_read_index): Return on no SEC_HAS_CONTENTS.
2010-09-08 Daniel Jacobowitz <dan@codesourcery.com>
* dwarf2read.c (read_structure_type): Move processing of
fields and member functions from here...
(process_structure_scope): ... to here.
2010-09-08 Daniel Jacobowitz <dan@codesourcery.com>
* gnu-v3-abi.c (gnuv3_print_method_ptr): Do not use
the domain type.
(gnuv3_make_method_ptr): Likewise.
2010-09-08 Tom Tromey <tromey@redhat.com>
* breakpoint.c (create_breakpoint): Add missing _().
2010-09-08 Doug Evans <dje@google.com>
* dwarf2-frame.h (dwarf2_frame_build_info): Delete, unused.
2010-09-08 Tom Tromey <tromey@redhat.com>
Revert:
2010-09-01 Tom Tromey <tromey@redhat.com>
* dwarf2read.c, gdbtypes.c, psymtab.c, symfile.h, symtab.c,
symtab.h: Revert earlier change.
2010-09-09 Sami Wagiaalla <swagiaal@redhat.com>
* psymtab.c (add_psymbol_to_bcache): Initialize
obj_section.
memset psymbol.ginfo.value to 0.
2010-09-06 Pedro Alves <pedro@codesourcery.com>
* infrun.c (resume): Extend comment on ignoring single-step
requests on vfork parents waiting for a vfork-done.
2010-09-06 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <pedro@codesourcery.com>
* corelow.c (core_open): Use target_signal_from_host if CORE_GDBARCH
is NULL.
* fork-child.c (startup_inferior) <resume_signal>: Use enum
target_signal type.
* linux-nat.c (linux_nat_resume): Use target_signal_to_host before
calling strsignal. Use enum target_signal type for saved_signo.
(linux_handle_extended_wait) <signo>: Use enum target_signal type.
(linux_nat_wait_1): Use enum target_signal type for signo. Use
target_signal_to_host before calling strsignal.
* remote-m32r-sdi.c (m32r_wait, m32r_detach): Replace 0 by
TARGET_SIGNAL_0.
2010-09-06 Pedro Alves <pedro@codesourcery.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
* common/signals.c (ANY): Remove.
(SET): No longer use ANY.
2010-09-06 Yao Qi <yao@codesourcery.com>
* infrunc(resume): When inferior is waiting_for_vfork_done,
clear step and don't use displaced stepping.
2010-09-04 Daniel Jacobowitz <dan@codesourcery.com>
* breakpoint.c (can_use_hardware_watchpoint): Handle the first
value specially.
2010-09-04 Jan Kratochvil <jan.kratochvil@redhat.com>
Code cleanup - split print_stop_reason.
* infrun.c (enum inferior_stop_reason): Remove.
(print_stop_reason): Remove by splitting into ...
(print_exited_reason, print_signal_exited_reason)
(print_no_history_reason, print_signal_received_reason)
(print_end_stepping_range_reason): ... these new functions. Update
the preceding comment.
(handle_inferior_event): Change the calls to print_exited_reason,
print_signal_exited_reason, print_no_history_reason,
print_signal_received_reason, print_end_stepping_range_reason.
(handle_step_into_function, handle_step_into_function_backward):
Change the calls to print_end_stepping_range_reason.
2010-09-03 Jan Kratochvil <jan.kratochvil@redhat.com>
* breakpoint.c (save_breakpoints): Use RETURN_MASK_ALL.
* cli-out.c: Include vec.h.
(cli_field_fmt, cli_spaces, cli_text, cli_message, cli_flush): New
variable stream, initialize it, use it.
(cli_redirect): New function comment. Replace the stream and
original_stream fields by the new streams field. Remove the
original_stream != NULL conditional, assert error on NULL instead.
(out_field_fmt, field_separator): New variable stream, initialize it, use it.
(cli_out_data_ctor): Assert non-NULL stream. Replace the stream and
original_stream fields by the new streams field.
(cli_out_set_stream): Replace the stream field by the new streams
field.
* cli-out.h: Include vec.h.
(ui_filep): New typedef, call DEF_VEC_P for it.
(struct cli_ui_out_data): Replace the stream and original_stream
fields by the new streams field.
* cli/cli-logging.c (set_logging_redirect): Call ui_out_redirect with
NULL first. Extend the comment.
(handle_redirections): Call ui_out_redirect with output.
* python/py-breakpoint.c (bppy_get_commands): Move ui_out_redirect
calls outside of the TRY_CATCH block.
2010-09-03 Joel Brobecker <brobecker@adacore.com>
GDB 7.2 released.
2010-09-02 Joel Brobecker <brobecker@adacore.com>
Back out the following change:
| 2010-06-29 Hui Zhu <teawater@gmail.com>
| * record.c (set_record_pic_cmdlist,
| show_record_pic_cmdlist): New variables.
| (set_record_pic_command,
| show_record_pic_command): New functions.
| (record_pic_function, record_pic_line, record_pic_enum,
| set_record_pic_type, record_pic_hide_nofunction,
| record_pic_hide_nosource, record_pic_hide_same): New variables.
| (record_pic_fputs): New function.
| (function_list, node_list, edge_list): New struct.
| (function_list, node_list, edge_list): New variables.
| (record_pic_cleanups, record_pic_node,
| record_pic_edge, cmd_record_pic): New functions.
| (_initialize_record): Add new commands for record pic.
2010-09-02 Daniel Jacobowitz <dan@codesourcery.com>
* config.in, configure: Regenerated.
* configure.ac: Check for waitpid.
* ser-pipe.c (pipe_close): Wait for the program to exit.
2010-09-02 Jan Kratochvil <jan.kratochvil@redhat.com>
* cli/cli-logging.c: Include gdb_assert.h.
(set_logging_overwrite): New function.
(logging_redirect): New comment.
(logging_no_redirect_file, set_logging_redirect)
(pop_output_files) <logging_no_redirect_file>: New.
(handle_redirections) <!logging_redirect>: New variable
no_redirect_file. Remove file autoclose for tee_file_new. No longer
discard cleanup for the close of former OUTPUT. Set
LOGGING_NO_REDIRECT_FILE.
(handle_redirections) <logging_redirect>: gdb_assert
LOGGING_NO_REDIRECT_FILE.
(show_logging_command) <logging_redirect handling>: Adjust messages
for SAVED_FILENAME not NULL.
(_initialize_cli_logging): Install set_logging_overwrite and
set_logging_redirect.
2010-09-02 Jan Kratochvil <jan.kratochvil@redhat.com>
* iq2000-tdep.c (iq2000_scan_prologue): Initialize SAL.END.
2010-09-02 Jan Kratochvil <jan.kratochvil@redhat.com>
* Makefile.in (GDB_WARN_CFLAGS_NO_FORMAT): Convert it to the no- form.
(monitor.o): Replace $(INTERNAL_WARN_CFLAGS) by $(INTERNAL_CFLAGS) and
add $(GDB_WARN_CFLAGS_NO_FORMAT).
(printcmd.o): Replace $(INTERNAL_CFLAGS_BASE) by $(INTERNAL_CFLAGS).
2010-09-02 Yao Qi <yao@codesourcery.com>
* linux-nat.c (status_to_str): Use WTERMSIG to extract the signal
number from a WIFSIGNALED status.
2010-09-01 Tom Tromey <tromey@redhat.com>
* symtab.h (lookup_type_symbol): Declare.
* symtab.c (lookup_symbol_in_language_full): Rename from
lookup_symbol_in_language. Add 'for_type' argument.
(lookup_symbol_in_language): New function.
(lookup_type_symbol): Likewise.
(lookup_symbol_aux): Add 'for_type' argument.
(match_symbol_aux): New function.
(lookup_symbol_aux_symtabs): Use expand_one_symtab_matching.
(match_transparent_type): New function.
(basic_lookup_transparent_type): Use expand_one_symtab_matching.
* symfile.h (struct quick_symbol_functions)
<pre_expand_symtabs_matching>: Remove.
<expand_one_symtab_matching>: New field.
* psymtab.c (expand_one_symtab_matching_psymtabs): New function.
(pre_expand_symtabs_matching_psymtabs): Remove.
(psym_functions): Update.
* gdbtypes.c (lookup_typename): Use lookup_type_symbol.
* dwarf2read.c (dw2_lookup_symbol): Update comment.
(dw2_pre_expand_symtabs_matching): Remove.
(dw2_expand_one_symtab_matching): New function.
(dwarf2_gdb_index_functions): Update.
2010-09-01 Joel Brobecker <brobecker@adacore.com>
* NEWS: Add entry announcing GDBserver support on powerpc-lynxos.
2010-09-01 Marc Khouzam <marc.khouzam@ericsson.com>
* mi/mi-main.c (mi_cmd_list_target_features): Add `reverse'
as a feature reported by -list-target-features.
2010-09-01 Joel Brobecker <brobecker@adacore.com>
* features/Makefile (WHICH): Add rs6000/powerpc-32.
(powerpc-32.o, powerpc-32.c): New rules.
(clean): Also remove powerpc-32.c.
* regformats/rs6000/powerpc-32.dat: Generate.
2010-08-31 Sami Wagiaalla <swagiaal@redhat.com>
* symfile.c (reread_symbols): Use psymbol_bcache_free, and
psymbol_bcache_init.
* psymtab.h (psymbol_bcache_init): New function prototype.
(psymbol_bcache_free): New function prototype.
(psymbol_bcache_get_bcache): New function prototype.
* psymtab.c (psymbol_bcache_init): New function.
(psymbol_bcache_free): New function.
(psymbol_bcache_full): New function.
(psymbol_bcache_get_bcache): New function.
(add_psymbol_to_bcache): use psymbol_bcache_full.
* objfiles.h (psymbol_cache): Change type of psymbol_cache to
psymbol_bcache.
* symmisc.c (print_symbol_bcache_statistics): Updated.
(print_objfile_statistics): Updated.
* objfiles.c (allocate_objfile): Use psymbol_bcache_init to initialize
psymbol_cache.
(free_objfile): Use psymbol_bcache_free.
2010-08-31 Tom Tromey <tromey@redhat.com>
PR c++/11961:
* dwarf2read.c (new_symbol_full) <DW_TAG_template_type_param>:
Don't set TYPE_NAME on the type.
2010-08-31 Michael Snyder <msnyder@msnyder-server.eng.vmware.com>
* infrun.c (set_exec_direction_func): Error out if target does not
support reverse execution.
2010-08-31 Jan Kratochvil <jan.kratochvil@redhat.com>
Make linux_get_siginfo_type `type *' unique.
* linux-tdep.c (linux_gdbarch_data_handle, struct linux_gdbarch_data)
(init_linux_gdbarch_data, get_linux_gdbarch_data): New.
(linux_get_siginfo_type): New variable linux_gdbarch_data. Initialize
it. Use linux_gdbarch_data->siginfo_type as a persistent storage.
(_initialize_linux_tdep): New.
2010-08-31 Jan Kratochvil <jan.kratochvil@redhat.com>
Code cleanup.
* defs.h (find_memory_region_ftype): New typedef.
(exec_set_find_memory_regions): Use it.
* exec.c (exec_set_find_memory_regions): Use find_memory_region_ftype.
* fbsd-nat.c (fbsd_find_memory_regions): Likewise.
* gcore.c (objfile_find_memory_regions): Likewise.
* gnu-nat.c (gnu_find_memory_regions): Likewise.
* linux-nat.c (linux_nat_find_memory_regions): Likewise.
* procfs.c (iterate_over_mappings_cb_ftype): Remove.
(iterate_over_mappings): Rename iterate_over_mappings_cb_ftype to
find_memory_region_ftype.
(insert_dbx_link_bpt_in_region): Likewise.
(iterate_over_mappings): Likewise. Drop the comment part about the
function prototype.
(find_memory_regions_callback): Use find_memory_region_ftype.
(proc_find_memory_regions): Likewise.
(info_mappings_callback): Rename iterate_over_mappings_cb_ftype to
find_memory_region_ftype.
* target.c (dummy_find_memory_regions): Use find_memory_region_ftype.
* target.h (struct target_ops) <to_find_memory_regions>: Likewise.
2010-08-31 Sami Wagiaalla <swagiaal@redhat.com>
* psymtab.c (add_psymbol_to_bcache): Remove 'static' from
'static partial_symbol psymbol'.
(psymbol_hash): New function.
(psymbol_compare): New function.
* bcache.c (hash_continue): New.
(hash): Use hash_continue.
* bcache.c: Add hash_function and compare_function
pointers to bcache struct.
(bcache_full): Use bcache->hash_function, and
bcache->compare_function.
(bcache_compare): New function.
(bcache_xmalloc): Take hash_function and
compare_function arguments and initialize the
bcach's pointers.
Updated comment.
* objfiles.c (allocate_objfile): Updated.
* symfile.c (reread_symbols): Updated.
* python/py-type.c (typy_richcompare): Updated.
2010-08-30 Andre Poenitz <andre.poenitz@nokia.com>
Tom Tromey <tromey@redhat.com>
PR python/11792:
* python/py-value.c (valpy_get_dynamic_type): New function.
(value_object_getset): Add "dynamic_type".
(valpy_get_type): Fail on error.
2010-08-30 Yao Qi <yao@codesourcery.com>
* arm-linux-tdep.c (arm_linux_sigreturn_return_addr): New.
(arm_linux_syscall_next_pc): New.
(arm_linux_copy_svc): Use arm_linux_sigreturn_return_addr instead.
(arm_linux_init_abi): Initialize syscall_next_pc.
* arm-tdep.c (thumb_get_next_pc_raw): Get next pc of SWI in Thumb mode.
(arm_get_next_pc_raw): Get next pc of SWI in ARM mode.
* arm-tdep.h (struct gdbarch_tdep): Add a function pointer syscall_next_pc.
Declare arm_frame_is_thumb.
2010-08-30 Jan Kratochvil <jan.kratochvil@redhat.com>
Code cleanup.
* breakpoint.c (bpstat_alloc): Remove unused prototype.
(bpstat_alloc): Change parameters cbs to bs_link_pointer. Adjust the
code.
(bpstat_stop_status): Change root_bs into bs_head and bs_link. Adjust
calls of bpstat_alloc. Remove explicit bs chain termination.
2010-08-28 Jan Kratochvil <jan.kratochvil@redhat.com>
Code cleanup.
* linux-nat.c (pull_pid_from_list): Rename status to statusp.
(my_waitpid): Likewise.
2010-08-27 Doug Evans <dje@google.com>
* dwarf2read.c (dw2_require_line_header): Read from .debug_types
as appropriate.
2010-08-27 Tom Tromey <tromey@redhat.com>
* dwarf2read.c (dwarf2_attach_fields_to_type): Don't set
TYPE_FIELD_IGNORE_BITS.
2010-08-27 Doug Evans <dje@google.com>
* dwarf2read.c (dwarf2_per_objfile_free): Reorganize buffers to match
the order they're defined in. munmap .debug_types buffer.
2010-08-26 Doug Evans <dje@google.com>
* dwarf2read.c (dw2_require_full_path): Rename parameter cu to per_cu.
(dw2_forget_cached_source_info): Rename local cu to per_cu.
(dw2_lookup_symtab, dw2_do_expand_symtabs_matching): Ditto.
(dw2_print_stats, dw2_expand_all_symtabs): Ditto.
(dw2_expand_symtabs_with_filename, dw2_find_symbol_file): Ditto.
(dw2_find_symbol_file, dw2_expand_symtabs_matching): Ditto.
(dw2_map_symbol_filenames, dwarf2_initialize_objfile): Ditto.
(dwarf2_free_objfile, write_one_signatured_type): Ditto.
(write_psymtabs_to_index): Ditto.
2010-08-26 Pedro Alves <pedro@codesourcery.com>
* NEWS: Mention libthread_db debugging with core files.
2010-08-26 Doug Evans <dje@google.com>
* dwarf2read.c (dwarf2_build_include_psymtabs): Remove unnecessary
forward decl. Pass pst->dirname to dwarf_decode_lines.
(psymtab_include_file_name): New function.
(dwarf_decode_lines): Call it. Update comments.
2010-08-25 Pedro Alves <pedro@codesourcery.com>
* dwarf2read.c (inherit_abstract_dies): Handle origin die's
compilation unit being different from target die's.
2010-08-24 Doug Evans <dje@google.com>
PR symtab/11942
* dwarf2read.c (dwarf2_per_objfile): New members debug_info_type_hash,
debug_types_type_hash.
(dwarf2_cu, dwarf2_per_cu_data): Delete member type_hash.
All uses updated.
(lookup_die_type): Renamed from tag_type_to_tag. First look in
appropriate type_hash table. All callers updated.
(allocate_signatured_type_table): Renamed from
allocate_signatured_type_hash_table. All callers updated.
(create_signatured_type_table_from_index): Renamed from
create_signatured_type_hash_from_index. All callers updated.
(read_die_type): Add comment. Move actual reading to ...
(read_die_type_1): ... here. New function.
(follow_die_ref_or_sig): Tweak comment.
(set_die_type): Rewrite to use appropriate choice of
debug_info_type_hash or debug_types_type_hash.
(get_die_type_at_offset): New function.
(get_die_type): Call it.
2010-08-24 Jan Kratochvil <jan.kratochvil@redhat.com>
* python/py-type.c (typy_richcompare): Initialize worklist.
2010-08-24 Daniel Jacobowitz <dan@codesourcery.com>
Kazu Hirata <kazu@codesourcery.com>
Jonathan Larmour <jifl@eCosCentric.com>
* arm-tdep.c: Include features/arm-with-m.c.
(arm_psr_thumb_bit): New. Update all uses of CPSR_T to
call this function.
(arm_pc_is_thumb): Add a gdbarch argument. Update all callers.
Check is_m after force-mode.
(arm_gdbarch_init): Check the binary before the target description.
Add check for M profile attribute. If we have an M-profile device,
but no target register description, use arm-with-m. Recognize the
new org.gnu.gdb.arm.m-profile feature and its xpsr register.
(_initialize_arm_tdep): Call initialize_tdesc_arm_with_m.
* arm-tdep.h (XPSR_T): Define.
(struct gdbarch_tdep): Add is_m member.
* features/arm-m-profile.xml, features/arm-with-m.c,
features/arm-with-m.xml: New files.
2010-08-23 Doug Evans <dje@google.com>
* dwarf2read.c (read_structure_type): Add comment.
(read_enumeration_type): Add comment.
(process_enumeration_scope): Move definition of some locals
closer to their use.
(read_namespace_type): Add comment.
(set_die_type): Fix typo in comment.
2010-08-23 Tom Tromey <tromey@redhat.com>
PR python/11145:
* python/py-value.c: Include expression.h.
(valpy_do_cast): New function.
(valpy_cast): Use it.
(valpy_dynamic_cast): New function.
(valpy_reinterpret_cast): Likewise.
(value_object_methods): Add dynamic_cast, reinterpret_cast.
2010-08-23 Tom Tromey <tromey@redhat.com>
PR python/11391:
* python/py-value.c (valpy_nonzero): Don't throw error for other
Value types.
2010-08-23 Tom Tromey <tromey@redhat.com>
PR python/10676:
* python/py-type.c: Include bcache.h, vec.h.
(struct type_equality_entry): New.
(compare_strings): New function.
(check_types_equal): Likewise.
(check_types_worklist): Likewise.
(typy_richcompare): Likewise.
(type_object_type): Set tp_richcompare field.
2010-08-23 Tom Tromey <tromey@redhat.com>
PR python/10953:
* python/py-type.c (typy_fields): Call check_typedef.
(typy_template_argument): Add TRY_CATCH.
2010-08-23 Tom Tromey <tromey@redhat.com>
PR python/11915:
* python/py-type.c (typy_array): New function.
(type_object_methods): Add "array".
2010-08-20 Pedro Alves <pedro@codesourcery.com>
* python/python.c: Include "serial.h".
(gdbpy_event_fds): Change type to `struct serial *' a array from
int array.
(gdbpy_run_events): Change parameters. Use serial_readchar in
place of read.
(gdbpy_post_event): Use serial_write in place of write.
(gdbpy_initialize_events): Use serial_pipe instead of pipe, and
serial_async in place of add_file_handler.
2010-08-20 Pedro Alves <pedro@codesourcery.com>
* serial.h (gdb_pipe, serial_pipe): Declare.
* serial.c (serial_interface_lookup): Take a const char pointer.
(serial_fdopen): Rename to ...
(serial_fdopen_ops): ... this. Add an OPS parameter and use it.
Call the OPS' fdopen function if there is one.
(serial_fdopen): Rewrite as wrapper to serial_fdopen_ops.
(serial_pipe): New.
(struct serial_ops) <fdopen>: New field.
* ser-mingw.c (free_pipe_state):
(free_pipe_state): Close output on non-pex pipes.
(pipe_windows_fdopen): New.
(gdb_pipe): New.
(_initialize_ser_windows): Register pipe_windows_fdopen.
* ser-go32.c (gdb_pipe): New.
* ser-pipe.c (pipe_close): Close file descriptor even if there's
no state pointer.
(pipe_ops): Delete.
(gdb_pipe): New.
2010-08-20 Keith Seitz <keiths@redhat.com>
PR symtab/11465:
* dwarf2read.c (struct delayed_method_info): New struct.
(struct dwarf2_cu): Add vector method_list.
(scan_partial_symbols): Count methods for union, class, structure,
and interface types.
(add_to_method_list): New function.
(free_delayed_list): New function.
(compute_delayed_physnames): New function.
(process_full_comp_unit): Make a cleanup for the CU's delayed
physname list, compute the delayed physnames, and free the
the list.
(dwarf2_add_member_fn): For C++ and Java, delay the computation
of the physname until after the CU is read.
* dwarf2read.c (read_structure_type): Check if the current
DIE's type was already completed after dwarf2_full_name
was called.
2010-08-19 Stan Shebs <stan@codesourcery.com>
* NEWS: Mention some additional changes.
2010-08-19 Tom Tromey <tromey@redhat.com>
* Makefile.in (install-python): Add DESTDIR.
2010-08-19 Doug Evans <dje@google.com>
PR exp/11926
* parser-defs.h (parse_float, parse_c_float): Declare.
* parse.c (parse_float, parse_c_float): New function.
* c-exp.y (parse_number): Call parse_c_float.
* objc-exp.y (parse_number): Ditto.
* p-exp.y (parse_number): Ditto. Use ANSI/ISO-style definition.
* jv-exp.y (parse_number): Call parse_float, fix suffix handling.
2010-08-19 Joel Brobecker <brobecker@adacore.com>
* psymtab.c (map_symbol_filenames_psymtab): Call FUN with
the arguments in the correct order.
* symtab.c (maybe_add_partial_symtab_filename): Declare
the arguments in the correct order.
2010-08-19 Jan Kratochvil <jan.kratochvil@redhat.com>
* varobj.c (varobj_create): Replace variable old_fi with old_id,
initialize it by null_frame_id, wrap its usage by get_frame_id,
frame_id_p and frame_find_by_id.
2010-08-18 Tom Tromey <tromey@redhat.com>
PR python/11900:
* configure: Rebuild.
* configure.ac: Add install-python to CONFIG_INSTALL.
* Makefile.in (install-python): New.
2010-08-18 Doug Evans <dje@google.com>
* gdb_assert.h (gdb_assert_not_reached): New macro.
(gdb_assert_fail): Fix typo in comment.
* avr-tdep.c (avr_return_value): Use gdb_assert_not_reached instead of
gdb_assert (0).
* darwin-nat.c (darwin_check_new_threads): Ditto.
* dwarf2read.c (dwarf2_get_section_info): Ditto.
(munmap_section_buffer): Ditto.
* m32c-tdep.c (make_types): Ditto.
(m32c_decode_srcdest4, m32c_decode_sd23, m32c_frame_base): Ditto.
* macroexp.c (get_character_constant): Ditto.
(get_string_literal): Ditto.
* mep-tdep.c (mep_pseudo_cr_size): Ditto.
(mep_pseudo_cr_index, mep_register_type): Ditto.
(mep_pseudo_register_read, mep_pseudo_register_write): Ditto.
(mep_get_insn, mep_analyze_prologue): Ditto.
* objfiles.c (qsort_cmp): Ditto.
* prologue-value.c (pv_is_identical): Ditto.
* record.c (record_get_loc): Ditto.
* value.c (value_static_field): Ditto.
* xtensa-tdep.c (call0_track_op): Ditto.
2010-08-18 Tom Tromey <tromey@redhat.com>
PR symtab/11919:
* gdbtypes.c (lookup_struct_elt_type): Clean up error emission.
* parse.c (parse_field_expression): Use RETURN_MASK_ERROR. Move
name-copying lower. Document exception behavior.
* completer.c (expression_completer): Catch exceptions from
parse_field_expression.
2010-08-18 Pedro Alves <pedro@codesourcery.com>
PR corefile/8210
* linux-thread-db.c (add_thread_db_info): Skip glibc/BZ5983
workaround on core files.
(try_thread_db_load_1): Don't try enabling thread event reporting
on core files.
(thread_db_load): Allow thread_db on core files.
(attach_thread): Don't check thread signals on core files, nor try
really attaching to the thread, nor enabling thread event event
reporting.
(thread_db_detach): Don't try disabing thread event reporting or
removing thread event breakpoints when debugging a core file.
(find_new_threads_callback): Don't try enabling thread event
reporting on core files.
(thread_db_find_new_threads_2): Don't look for a stopped lwp when
debugging a core file.
(thread_db_find_new_threads): Don't update thread
cores (processors) when debugging a core (dump).
2010-08-18 Pedro Alves <pedro@codesourcery.com>
PR corefile/8210
* corelow.c (add_to_thread_list): Don't use
gdbarch_core_reg_section_encodes_pid. Use bfd_core_file_pid.
(get_core_register_section): Don't use
gdbarch_core_reg_section_encodes_pid.
* gdbarch.sh (core_reg_section_encodes_pid): Delete.
* gdbarch.h, gdbarch.c: Regenerate.
* amd64-sol2-tdep.c (amd64_sol2_init_abi): Don't set
gdbarch_core_reg_section_encodes_pid.
* i386-sol2-tdep.c (i386_sol2_init_abi): Ditto.
* sparc-sol2-tdep.c (sparc32_sol2_init_abi): Ditto.
* sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Ditto.
2010-08-18 Yao Qi <yao@codesourcery.com>
* MAINTAINERS : Add myself under Write After Approval.
2010-08-17 Tom Tromey <tromey@redhat.com>
* NEWS: Mention template parameter support.
2010-08-17 Pedro Alves <pedro@codesourcery.com>
PR breakpoints/11371
* breakpoint.c (decref_bp_location): Assert the reference count is
sane.
2010-08-17 Pedro Alves <pedro@codesourcery.com>
PR breakpoints/11371
* breakpoint.c (breakpoint_init_inferior): Decrement the
location's reference count instead of deleting right away.
(bpstat_free): Decrement the location's reference count. Make
static.
(bpstat_copy): Increment the location's reference count.
(bpstat_find_breakpoint): Adjust.
(bpstat_num): Adjust.
(print_it_typical): Adjust. Use the breakpoint pointer in the
bpstat instead of the location's owner.
(bpstat_alloc): Remove const qualifier from the 'bl' parameter.
Adjust to record the location's owner in the bpstat.
(watchpoint_check): Use the breakpoint pointer in the bpstat
instead of the location's owner.
(bpstat_check_breakpoint_conditions): Don't handle
bp_watchpoint_scope here. Use the breakpoint pointer in the
bpstat instead of the location's owner.
(bpstat_stop_status): Defer inferior function calls to after
building the bpstat list. Handle bp_watchpoint_scope here. Use
the breakpoint pointer in the bpstat instead of the location's
owner.
(bpstat_what): Use the breakpoint pointer in the bpstat instead of
the location's owner.
(free_bp_location): Don't walk bpstats clearing locations.
(incref_bp_location): New.
(decref_bp_location): New.
(breakpoint_auto_delete): Use the breakpoint pointer in the bpstat
instead of the location's owner.
(update_global_location_list): Clear the location's owner, and
decrement the location's reference count instead of deleting it
right away.
(breakpoint_retire_moribund): Decrement the location's reference
count instead of deleting it right away.
(bpstat_remove_bp_location): Delete.
(bpstat_remove_breakpoint): New.
(bpstat_remove_bp_location_callback): Delete.
(bpstat_remove_breakpoint_callback): New.
(delete_breakpoint): Iterate over all threads' stop_bpstat's
clearing references to the breakpoint that is being deleted.
* breakpoint.h (struct bp_location) <refc>: New field.
<owner>: Update comments.
(bpstat_free): Delete declaration.
(struct bpstats): Change the type of the breakpoint_at field to
struct breakpoint point, from struct bp_location pointer. Add new
field bp_location_at.
2010-08-16 Tom Tromey <tromey@redhat.com>
* NEWS: Fix typo.
2010-08-16 Tom Tromey <tromey@redhat.com>
* NEWS: Mention watch -location.
2010-08-16 Jan Kratochvil <jan.kratochvil@redhat.com>
* breakpoint.c (update_watchpoint): Add source empty line. Prefer
EXP_STRING_REPARSE to EXP_STRING.
(watch_command_1): Set also EXP_STRING_REPARSE.
(delete_breakpoint): Free also EXP_STRING_REPARSE.
* breakpoint.h (struct breakpoint): New field exp_string_reparse.
Update comment for exp_string.
2010-08-16 Tom Tromey <tromey@redhat.com>
* value.c (release_value): Clear 'next' pointer.
* breakpoint.c (watch_command_1): Add 'just_location' argument.
(watch_command_wrapper): Update.
(watch_maybe_just_location): New function.
(watch_command): Update.
(rwatch_command_wrapper): Update.
(rwatch_command): Update.
(awatch_command_wrapper): Update.
(awatch_command): Update.
(check_for_argument): New function.
(_initialize_breakpoint): Update help text.
2010-08-14 Ulrich Weigand <uweigand@de.ibm.com>
* arm-tdep.c (arm_push_dummy_call): Handle pointers to
typedef'ed function types correctly.
2010-08-13 Tom Tromey <tromey@redhat.com>
* python/python-internal.h (gdbpy_get_hook_function): Don't
declare.
2010-08-13 Jan Kratochvil <jan.kratochvil@redhat.com>
* cli/cli-logging.c (logging_overwrite, logging_redirect): Make them
static.
2010-08-13 Ken Werner <ken.werner@de.ibm.com>
* python/python.c (gdbpy_solib_name): Remove the const qualifier of
the format strings to be compatible with Python 2.4.
2010-08-13 Vladimir Prus <vladimir@codesourcery.com>
Easier and more stubborn MI memory read commands.
* mi/mi-cmds.c (mi_cmds): Register data-read-memory-bytes
and data-write-memory-bytes.
* mi/mi-cmds.h (mi_cmd_data_read_memory_bytes)
(mi_cmd_data_write_memory_bytes): New.
* mi/mi-main.c (mi_cmd_data_read_memory): Use regular target_read.
(mi_cmd_data_read_memory_bytes, mi_cmd_data_write_memory_bytes):
New.
(mi_cmd_list_features): Add "data-read-memory-bytes" feature.
* target.c (target_read_until_error): Remove.
(read_whatever_is_readable, free_memory_read_result_vector)
(read_memory_robust): New.
* target.h (target_read_until_error): Remove.
(struct memory_read_result, free_memory_read_result_vector)
(read_memory_robust): New.
2010-08-13 Hui Zhu <teawater@gmail.com>
* dwarf2read.c (load_partial_comp_unit): Initialize free_cu_cleanup.
(read_comp_unit): Initialize back_to.
2010-08-12 Daniel Jacobowitz <dan@codesourcery.com>
Pedro Alves <pedro@codesourcery.com>
* dwarf2read.c: Include "c-lang.h" and "valprint.h".
(struct dwarf2_per_objfile) <reading_partial_symbols>: New field.
(struct partial_die_info) <has_template_arguments>: New field.
<num_attrs>: Change type to unsigned char.
<building_fullname>: New field.
(dwarf2_build_psymtabs_hard): Set reading_partial_symbols. Only
allocate a CU if we don't have one already. Add a cleanup for the
CU.
(partial_die_full_name): Handle template arguments not in
DW_AT_name.
(dwarf2_psymtab_to_symtab): Clear reading_partial_symbols.
(load_full_comp_unit): Only allocate a CU if we don't have one
already.
(do_ui_file_peek_last): New.
(dwarf2_compute_name): Handle template parameters not in
DW_AT_name.
(read_comp_unit): Read and free abbrevs if not read yet.
(load_partial_dies): Handle template arguments not in DW_AT_name.
(find_partial_die): If we have a CU, but no a partial dies yet,
also read in the CU.
(dwarf2_const_value_attr): New, abstracted out from
dwarf2_const_value.
(dwarf2_const_value, dwarf2_const_value_data): Adjust to use
dwarf2_const_value_attr.
(determine_prefix): Detect and break loops created by RCVT's debug
info.
(maybe_queue_comp_unit): Bail out early if reading partial
symbols.
(follow_die_offset): Load full CU if we have no dies.
* dwarf2loc.c (dwarf2_evaluate_loc_desc): Make public.
* dwarf2loc.h (dwarf2_evaluate_loc_desc): Declare.
2010-08-11 Tom Tromey <tromey@redhat.com>
Phil Muldoon <pmuldoon@redhat.com>
* python/python.c (gdbpy_run_events): New function.
(gdbpy_post_event): Likewise.
(gdbpy_initialize_events): Likewise.
(_initialize_python): Call gdbpy_initialize_events.
2010-08-11 Ken Werner <ken.werner@de.ibm.com>
* gdb/valarith.c (vector_binop): New function.
(scalar_binop): Likewise.
(value_binop): Call scalar_binop or vector_binop depending on the types.
* gdb/eval.c (ptrmath_type_p): Return 0 in case of TYPE_VECTOR.
(evaluate_subexp_with_coercion): Add vector check to not convert vectors
to pointers.
* gdb/value.c (coerce_array): Add vector check to not coerce vectors.
2010-08-11 Brad Roberts <braddr@puremagic.com>
* d-lang.c (extract_identifiers): Handle multiple digits.
2010-08-11 Jan Kratochvil <jan.kratochvil@redhat.com>
Code cleanup.
* dummy-frame.c (dummy_frame_unwinder): Remove its static qualifier.
Rename to dummy_frame_unwind.
(dummy_frame_unwind): Remove.
* dummy-frame.h (dummy_frame_unwind): Reference directly the struct.
* frame-unwind.c (frame_unwind_init): Use address of
dummy_frame_unwind and inline_frame_unwind.
* frame.c (create_sentinel_frame): Use address of
sentinel_frame_unwind.
* inline-frame.c (inline_frame_unwinder): Rename to
inline_frame_unwind.
(inline_frame_unwind): Remove.
* inline-frame.h (inline_frame_unwind): Reference directly the struct.
* sentinel-frame.c (sentinel_frame_unwinder): Rename to
sentinel_frame_unwind.
(sentinel_frame_unwind): Remove.
* sentinel-frame.h (sentinel_frame_unwind): Reference directly the
struct.
2010-08-11 Jan Kratochvil <jan.kratochvil@redhat.com>
Code cleanup.
* frame-unwind.c (frame_unwind_find_by_frame): Remove the return type
and returned value. New comment from frame-unwind.h.
* frame-unwind.h (frame_unwind_find_by_frame): Remove the return type.
Extend the comment.
* frame.c (get_frame_id, frame_unwind_register_value)
(create_new_frame, get_prev_frame_1, frame_unwinder_is)
(get_frame_type, frame_unwind_arch): Do not use the return value of
frame_unwind_find_by_frame.
2010-08-11 Phil Muldoon <pmuldoon@redhat.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
Tom Tromey <tromey@redhat.com>
* python/python.c (gdbpy_solib_address): New function.
(gdbpy_decode_line): Likewise.
2010-08-10 Tom Tromey <tromey@redhat.com>
Revert gdb-add-index addition:
* Makefile.in (install-only): Don't install gdb-add-index.
* gdb-add-index.sh: Remove.
2010-08-09 Kevin Buettner <kevinb@redhat.com>
* remote-sim.c (gdbsim_xfer_inferior_memory): Replace
`target_has_execution' check with `to_has_memory' check.
(gdbsim_has_all_memory, gdbsim_has_memory): New functions.
(init_gdbsym_ops): Initialize relevant fields of `gdbsim_ops'
with `gdbsim_has_all_memory' and `gdbsim_has_memory'.
2010-08-09 Kevin Buettner <kevinb@redhat.com>
* remote-sim.c (program_loaded, gdbsim_desc, remote_sim_ptid)
(resume_siggnal, resume_step): Move these static globals...
(struct sim_inferior_data): ...into this new struct.
(sim_inferior_data_key, next_pid, sim_argv, gdbsim_is_open):
New static globals.
(gdb_callback, callbacks_initialized): Move these globals to
a point earlier in the file.
(check_for_duplicate_sim_descriptor, get_sim_inferior_data)
(get_sim_inferior_data_by_ptid, sim_inferior_data_cleanup)
(gdbsim_close_inferior, gdbsim_resume_inferior)
(gdbsim_stop_inferior): New functions.
(SIM_INSTANCE_NOT_NEEDED, SIM_INSTANCE_NEEDED, INITIAL_PID):
New constants.
(gdbsim_fetch_register, gdbsim_store_register, gdbsim_load)
(gdbsim_create_inferior, gdbsim_open, gdbsim_close, gdbsim_resume)
(gdbsim_stop, gdbsim_cntrl_c, gdbsim_wait)
(gdbsim_xfer_inferior_memory, gdbsim_files_info)
(gdbsim_mourn_inferior, simulator_command, gdbsim_thread_alive,
(gdbsim_pid_to_str): Invoke `get_sim_inferior_data' to set
new local variable `sim_data' in each of these functions. Use
`sim_data' to reference former globals `program_loaded',
`gdbsim_desc', `remote_sim_ptid', `resume_siggnal', and
`resume_step'.
(gdbsim_open): Remove local variable `argv'. Put results of call
to `gdb_buildargv' in `sim_argv' rather than in `argv'. Don't
make a cleanup for it. Free it though when a sim instance cannot
be obtained.
(gdbsim_close): Free sim_argv and null it out as appropriate.
Close sim instances in all inferiors.
(gdbsim_cntrl_c): Stop all inferiors.
(gdbsim_wait):
(_initialize_remote_sim): Initialize `sim_inferior_data_key'.
2010-08-09 Sami Wagiaalla <swagiaal@redhat.com>
* dwarf2read.c (new_symbol): Add symbol to variable list at end of
function after symbol construction is complete.
Do the same for template symbol addition to template_symbols list.
2010-08-09 Sami Wagiaalla <swagiaal@redhat.com>
* symtab.c (symbol_get_demangled_name): Remove assertion and
return NULL when language_specific.cplus_specific is not initialized.
* stabsread.c (define_symbol): Set the name before calling
cp_scan_for_anonymous_namespaces.
2010-08-09 Sami Wagiaalla <swagiaal@redhat.com>
* symtab.h: Renamed SYMBOL_INIT_LANGUAGE_SPECIFIC to
SYMBOL_SET_LANGUAGE.
(symbol_init_language_specific): Renamed to symbol_set_language.
* symtab.c (symbol_init_language_specific): Removed redundant check
for language_cplus.
Renamed to symbol_set_language.
* stabsread.c (define_symbol): Updated.
(read_enum_type): Updated
* psymtab.c (add_psymbol_to_bcache): Updated.
* minsyms.c (install_minimal_symbols): Updated.
* coffread.c (process_coff_symbol): SYMBOL_SET_LANGUAGE instead of
SYMBOL_LANGUAGE to set the language.
* minsyms.c (prim_record_minimal_symbol_full): Ditto.
* mdebugread.c (new_symbol): Ditto.
* cp-namespace.c (check_one_possible_namespace_symbol): Ditto.
* dwarf2read.c (new_symbol_full): Ditto.
* jv-lang.c (add_class_symbol): Ditto.
2010-08-07 Jan Kratochvil <jan.kratochvil@redhat.com>
* defs.h (make_cleanup_restore_uinteger, make_cleanup_restore_ui_file)
(make_cleanup_restore_page_info)
(set_batch_flag_and_make_cleanup_restore_page_info): New declarations.
* gdbcmd.h (execute_command_to_string): New declaration.
* python/python.c (struct restore_ui_file_closure, restore_ui_file)
(make_cleanup_restore_ui_file): Move to utils.c
(execute_gdb_command) <to_string>: Move ...
* top.c (execute_command_to_string): ... here. Call
set_batch_flag_and_make_cleanup_restore_page_info.
* utils.c (make_cleanup_restore_integer): New source file blank line.
(make_cleanup_restore_uinteger): New.
(struct restore_ui_file_closure, do_restore_ui_file)
(make_cleanup_restore_ui_file): Move here from python/python.c.
(init_page_info) <batch_flag>
(do_restore_page_info_cleanup, make_cleanup_restore_page_info)
(set_batch_flag_and_make_cleanup_restore_page_info): New.
2010-08-06 Maciej W. Rozycki <macro@codesourcery.com>
* thread.c (add_thread_silent): Use null_ptid instead of
minus_one_ptid while getting rid of stale inferior_ptid.
2010-08-06 Corinna Vinschen <vinschen@redhat.com>
* dwarf2-frame.c (struct dwarf2_cie): Add ptr_size member.
Throughout, call read_encoded_value with ptr_size rather than addr_size.
(decode_frame_entry_1): Remove redundant setting of
addr_size. Call gdbarch_dwarf2_addr_size rather than gdbarch_ptr_bit
to determine addr_size in Dwarf versions < 4. Set ptr_size dependent
on examined frame section. Add comment to explain why.
* gdbarch.sh (dwarf2_addr_size): Define as variable. Add lengthy
comment to explain usage.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Set dwarf2_addr_size to 4.
2010-08-06 Jan Kratochvil <jan.kratochvil@redhat.com>
Code cleanup.
* varobj.c (varobj_create): Move variables fi, old_fi and block to
a more inner block.
2010-08-05 Pedro Alves <pedro@codesourcery.com>
* configure.tgt (alpha*-*-linux*, am33_2.0*-*-linux*, frv-*-*)
(hppa*-*-linux*, ia64-*-linux*, m32r*-*-linux*, m68*-*-linux*)
(microblaze*-linux-*, mips*-*-linux*, sh*-*-linux*)
(sparc-*-linux*, sparc64-*-linux*, xtensa*-*-linux*): Add
linux-tdep.o to gdb_target_obs.
2010-08-05 Marc Khouzam <marc.khouzam@ericsson.com>
* mi/mi-main.c (mi_cmd_remove_inferior): Properly access first
argument.
2010-08-05 Hui Zhu <teawater@gmail.com>
* mips-linux-tdep.c(regset.h): New include.
(mips_supply_gregset_wrapper, mips_fill_gregset_wrapper,
mips_supply_fpregset_wrapper, mips_fill_fpregset_wrapper,
mips64_supply_gregset_wrapper, mips64_fill_gregset_wrapper,
mips64_supply_fpregset_wrapper, mips64_fill_fpregset_wrapper,
mips_linux_regset_from_core_section): New functions.
(fetch_core_registers, regset_core_fns): Deleted.
(mips_linux_init_abi): Add mips_linux_regset_from_core_section.
Deleted regset_core_fns.
* mips-tdep.c(mips_gdbarch_init): Initialize tdep->gregset,
tdep->gregset64, tdep->fpregset and tdep->fpregset64.
* mips-tdep.h(gdbarch_tdep): Add gregset, gregset64, fpregset
and fpregset64.
2010-08-04 Pedro Alves <pedro@codesourcery.com>
* s390-tdep.c: Include linux-tdep.h.
(s390_gdbarch_init): Call linux_init_abi.
2010-08-04 Pedro Alves <pedro@codesourcery.com>
* corelow.c (core_pid_to_str): Default to using normal_pid_to_str
instead of printing "Thread" here.
* linux-tdep.c: Include inferior.h.
(linux_core_pid_to_str): New.
(linux_init_abi): New.
* linux-tdep.h (linux_init_abi): Declare.
* alpha-linux-tdep.c: Include linux-tdep.h.
(alpha_linux_init_abi): Call linux_init_abi.
* amd64-linux-tdep.c (amd64_linux_init_abi): Call linux_init_abi.
* arm-linux-tdep.c (arm_linux_init_abi): Call linux_init_abi.
* frv-linux-tdep.c: Include linux-tdep.h
(frv_linux_init_abi): Call linux_init_abi.
* hppa-linux-tdep.c: Include linux-tdep.h
(hppa_linux_init_abi): Call linux_init_abi.
* i386-linux-tdep.c (i386_linux_init_abi): Call linux_init_abi.
* ia64-linux-tdep.c: Include linux-tdep.h.
(ia64_linux_init_abi): Call linux_init_abi.
* m32r-linux-tdep.c: Include linux-tdep.h.
(m32r_linux_init_abi): Call linux_init_abi.
* m68klinux-tdep.c: Include linux-tdep.h.
(m68k_linux_init_abi): Call linux_init_abi.
* microblaze-linux-tdep.c: Include linux-tdep.h.
(microblaze_linux_init_abi): Call linux_init_abi.
* mips-linux-tdep.c: Include linux-tdep.h.
(mips_linux_init_abi): Call linux_init_abi.
* mn10300-linux-tdep.c: Include linux-tdep.h.
(am33_linux_init_osabi): Call linux_init_abi. Rename the
'gdbinfo' parameter to 'info'.
* ppc-linux-tdep.c: Include linux-tdep.h.
(ppc_linux_init_abi): Call linux_init_abi.
* sh-linux-tdep.c: Include linux-tdep.h.
(sh_linux_init_abi): Call linux_init_abi.
* sparc-linux-tdep.c: Include linux-tdep.h.
(sparc32_linux_init_abi): Call linux_init_abi.
* sparc64-linux-tdep.c: Include linux-tdep.h.
(sparc64_linux_init_abi): Call linux_init_abi.
* xtensa-linux-tdep.c: Include linux-tdep.h.
(xtensa_linux_init_abi): Call linux_init_abi.
* i386-cygwin-tdep.c (i386_windows_core_pid_to_str): New.
(i386_cygwin_init_abi): Install it as gdbarch_core_pid_to_str
callback.
2010-08-03 Doug Evans <dje@google.com>
* breakpoint.c (bpdisp_text): Constify bpdisps.
* solib-svr4.c (solib_break_names): Constify.
(bkpt_names, main_name_list): Constify.
(match_main): Constify soname arg.
(bfd_lookup_symbol): Remove unnecessary forward decl.
Constify symname arg.
(enable_break): Constify bkpt_namep.
* symtab.c (search_symbols): Constify types, types2, types3, types4.
(symtab_symbol_info): Constify classnames.
2010-08-03 Phil Muldoon <pmuldoon@redhat.com>
* NEWS: Document Python value inferior function calls.
2010-08-02 Doug Evans <dje@google.com>
* dwarf2read.c (dwarf_attr_name): Add DW_AT_GNU_odr_signature.
2010-07-31 Paul Pluzhnikov <ppluzhnikov@google.com>
* linux-thread-db.c (libthread_db_debug): New variable.
(thread_db_find_new_threads_silently): Control verbosity with it.
(try_thread_db_load_1, try_thread_db_load): Likewise.
(find_new_threads_once): Likewise.
(_initialize_thread_db): Set/show it.
2010-07-31 Jan Kratochvil <jan.kratochvil@redhat.com>
* common/signals.c (signals): Move the content to signals.def.
Include it. Remove the INDENT comments.
2010-07-30 Tom Tromey <tromey@redhat.com>
* Makefile.in (install-only): Install gdb-add-index.
* gdb-add-index.sh: New file.
2010-07-31 Renquan Cheng <crq@gcc.gnu.org>
* MAINTAINERS: Add myself for write after approval privileges.
2010-07-30 Jan Kratochvil <jan.kratochvil@redhat.com>
* symfile.c (addr_section_name): New function.
(addrs_section_compar): Use it.
(addr_info_make_relative): Use it. Move variable sect_name into a more
inner block. Make ".dynbss" and ".sdynbss" checks more strict.
2010-07-30 Tom Tromey <tromey@redhat.com>
* configure: Rebuild.
* configure.ac: Add missing case for Python 2.7.
2010-07-29 DJ Delorie <dj@redhat.com>
* rx-tdep.c (rx_analyze_prologue): Don't require branches to have
conditions.
2010-07-29 Pedro Alves <pedro@codesourcery.com>
* PROBLEMS: Remove mention of all problems.
2010-07-28 Pedro Alves <pedro@codesourcery.com>
PR build/11848
* configure.ac: Check for wresize.
* configure, config.in: Regenerate.
* tui/tui-win.c (make_visible_with_new_height): Wrap wresize call
with HAVE_WRESIZE.
2010-07-28 Tom Tromey <tromey@redhat.com>
PR python/11060:
* python/py-type.c (typy_legacy_template_argument): New function,
extracted from typy_template_argument.
(typy_template_argument): Use TYPE_TEMPLATE_ARGUMENT. Return a
value when needed.
2010-07-28 Oleg Nesterov <oleg@redhat.com>
* remote.c (readchar): Call pop_target in case of SERIAL_ERROR.
2010-07-27 Tom Tromey <tromey@redhat.com>
* dwarf2read.c (dwarf2_const_value_data): Never sign extend.
2010-07-28 Daniel Jacobowitz <dan@codesourcery.com>
* dwarf2read.c (read_subroutine_type): Improve THIS detection,
handling DW_AT_object_pointer, and workaround GCC PR 43053.
2010-07-28 Tom Tromey <tromey@redhat.com>
* Makefile.in (HFILES_NO_SRCDIR): Remove link-warning.h.
2010-07-28 Joel Brobecker <brobecker@adacore.com>
* remote.c (remote_download_tracepoint): Add missing gettext markup.
* tracepoint.c (parse_static_tracepoint_marker_definition): Likewise.
2010-07-28 Joel Brobecker <brobecker@adacore.com>
* breakpoint.c (breakpoint_re_set_one): Move call to set_language
down, just before the block that parse the breakpoint addr_string.
2010-07-28 Tom Tromey <tromey@redhat.com>
PR c++/9946:
* symfile.c (reread_symbols): Clear template_symbols.
* symtab.h (struct symbol) <is_cplus_template_function>: New
field.
(SYMBOL_IS_CPLUS_TEMPLATE_FUNCTION): New macro.
(struct template_symbol): New.
* symtab.c (lookup_symbol_aux_local): Use
cp_lookup_symbol_imports_or_template.
* objfiles.h (struct objfile) <template_symbols>: New field.
* objfiles.c (relocate_one_symbol): New function.
(objfile_relocate1): Use it. Relocate isolated symbols.
* gdbtypes.h (struct cplus_struct_type) <n_template_arguments,
template_arguments>: New fields.
(TYPE_N_TEMPLATE_ARGUMENTS): New macro.
(TYPE_TEMPLATE_ARGUMENTS): Likewise.
(TYPE_TEMPLATE_ARGUMENT): Likewise.
(lookup_typename): Update.
* gdbtypes.c (lookup_typename): Constify "block" argument.
* dwarf2read.c: Include vec.h.
(symbolp): New typedef.
(read_func_scope): Read template arguments. Allocate a
template_symbol when needed.
(read_structure_type): Read template arguments.
(new_symbol_full): New function, from new_symbol. Handle
DW_TAG_template_type_param and DW_TAG_template_value_param.
(new_symbol): Rewrite as wrapper.
* cp-support.h (cp_lookup_symbol_imports_or_template): Declare.
* cp-namespace.c: Include language.h.
(search_symbol_list): New function.
(cp_lookup_symbol_imports_or_template): Likewise.
2010-07-28 Balazs Kezes <rlblaster@gmail.com>
* tui/tui-win.c (make_visible_with_new_height): Resize and move
the command window to the new size and position.
2010-07-28 Balazs Kezes <rlblaster@gmail.com>
* tui/tui-win.c (tui_resize_all): Update the locator's origin's
coordinates.
2010-07-28 Balazs Kezes <rlblaster@gmail.com>
* tui/tui-io.c (tui_handle_resize_during_io): Call tui_resize_all
after a detecting a resize.
* tui/tui-win.c (tui_resize_all): Remove tui_set_win_resized_to
call.
2010-07-28 Pedro Alves <pedro@codesourcery.com>
* configure.ac: Check for resize_term.
* configure, config.in: Regenerate.
2010-07-27 Joel Brobecker <brobecker@adacore.com>
* MAINTAINERS (Write After Approval): Reorder a couple of entries.
2010-07-27 Daniel Jacobowitz <dan@codesourcery.com>
* dwarf2read.c (read_string): Rename to ...
(read_direct_string): ... this.
(skip_one_die, read_attribute_value, dwarf_decode_line_header)
(dwarf_decode_lines, dwarf_decode_macros): Adjust.
2010-07-27 Jan Kratochvil <jan.kratochvil@redhat.com>
* linux-nat.c (linux_nat_lp_status_is_event): New function.
(count_events_callback, select_event_lwp_callback)
(cancel_breakpoints_callback, linux_nat_wait_1): Use it.
2010-07-27 Jan Kratochvil <jan.kratochvil@redhat.com>
* ia64-linux-nat.c (ia64_linux_status_is_event): New function.
(_initialize_ia64_linux_nat): Install it.
* linux-nat.c (sigtrap_is_event, linux_nat_status_is_event)
(linux_nat_set_status_is_event): New.
(stop_wait_callback, count_events_callback, select_event_lwp_callback)
cancel_breakpoints_callback, linux_nat_filter_event)
(linux_nat_wait_1): Use linux_nat_status_is_event.
* linux-nat.h (linux_nat_set_status_is_event): New prototype.
2010-07-27 Tom Tromey <tromey@redhat.com>
* NEWS: Mention labels, .gdb_index.
2010-07-28 CHENG Renquan <rqcheng@smu.edu.sg>
* cli/cli-cmds.c (disassemble_command): Add support of disassemble
"start,+length" form of arguments.
* NEWS: Add "Changed commands" (disassemble) section for "Changes
since GDB 7.1"; and merge two separated paragraphs of disassemble
description in "Changes in GDB 7.0".
2010-07-27 Jan Kratochvil <jan.kratochvil@redhat.com>
* top.c (input_from_terminal_p): Return 0 on BATCH_FLAG.
* utils.c (defaulted_query): Do not explicitly check for BATCH_FLAG.
(fputs_maybe_filtered): Do not do filtering also on
! INPUT_FROM_TERMINAL_P.
2010-07-27 Joel Brobecker <brobecker@adacore.com>
* dwarf2read.c (dw2_find_pc_sect_symtab): Remove trailing newline
in warning message.
2010-07-27 Phil Muldoon <pmuldoon@redhat.com>
* python/py-value.c (valpy_call): New Function.
2010-07-27 Ken Werner <ken.werner@de.ibm.com>
* dwarf2read.c (dwarf2_read_index): Initialize the types_list and
types_list_elements variables.
2010-07-26 Tom Tromey <tromey@redhat.com>
* dwarf2loc.c (locexpr_describe_location_piece): Also recognize
TLS with DW_OP_const4u or DW_OP_const8u.
2010-07-26 Thiago Jung Bauermann <bauerman@br.ibm.com>
* ppc-linux-nat.c (store_vsx_register): Use PTRACE_GETVSXREGS to get
VSX registers contents.
2010-07-26 Jerome Guitton <guitton@adacore.com>
* dwarf2read.c (add_partial_symbol): Do not add a global variable if
its adress is null. Add comment to explain why.
(new_symbol): Ditto.
2010-07-25 Jan Kratochvil <jan.kratochvil@redhat.com>
* linux-nat.c (linux_nat_do_thread_registers): Convert STOP_SIGNAL to
the host signal first.
2010-07-23 Tom Tromey <tromey@redhat.com>
* dwarf2read.c (struct dwarf2_per_objfile) <n_type_comp_units,
type_comp_units>: New fields.
(dw2_get_cu): New function.
(create_cus_from_index): Remove unused argument.
(create_signatured_type_hash_from_index): New function.
(create_addrmap_from_index): Update.
(dwarf2_read_index): Handle version 2.
(dw2_find_last_source_symtab, dw2_forget_cached_source_info)
(dw2_lookup_symtab, dw2_do_expand_symtabs_matching)
(dw2_print_stats, dw2_expand_all_symtabs)
(dw2_expand_symtabs_with_filename, dw2_find_symbol_file)
(dw2_expand_symtabs_matching, dw2_map_symbol_filenames): Update.
(dwarf2_initialize_objfile): Call create_debug_types_hash_table.
(allocate_signatured_type_hash_table): New function.
(add_signatured_type_cu_to_list): Likewise.
(create_debug_types_hash_table): Use them. Set type_comp_units.
(read_signatured_type): Ensure section data is available.
(add_address_entry): Don't record empty ranges.
(struct signatured_type_index_data): New.
(write_one_signatured_type): New function.
(write_psymtabs_to_index): Write type CUs.
(save_gdb_index_command): Update comment.
(process_type_comp_unit): Move inititalization of
from_debug_types...
(create_debug_types_hash_table): ... here.
2010-07-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb_gcore.sh (tmpfile): Remove the variable, its initialization,
cleanup and generating of gdb script to it.
(gdb): Use redirection from /dev/null. Use --nx. Turn off pagination
and terminal size. Convert $tmpfile to a series of -ex-es.
2010-07-23 Keith Seitz <keiths@redhat.com>
* symtab.c (basic_lookup_transparent_type): Call pre-expand
hook for STATIC_BLOCK types, too.
2010-07-23 Keith Seitz <keiths@redhat.com>
* dwarf2read.c: Remove unused typedef dwarf2_cu_per_cu_data_ptr
and vector definition.
2010-07-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* linux-nat.c (cancel_breakpoint): Remove unused forward declaration.
2010-07-22 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf2read.c: Include completer.h.
(save_gdb_index_command): Use matching usage command name.
(_initialize_dwarf2_read): New variable c, initialize it by add_cmd.
Set filename_completer for it.
2010-07-22 Tom Tromey <tromey@redhat.com>
* dwarf2read.c (create_debug_types_hash_table): Set objfile on
type signature's per-CU data.
2010-07-22 Pedro Alves <pedro@codesourcery.com>
* NEWS: Mention target reported shared libraries support by
default.
2010-07-21 Pedro Alves <pedro@codesourcery.com>
PR symtab/11827
Revert:
2010-05-21 Pierre Muller <muller@ics.u-strasbg.fr>
* dwarf2read.c (process_die): Also allow DW_TAG_const_type
and DW_TAG_volatile_type.
(new_symbol): Likewise.
2010-07-21 Sami Wagiaalla <swagiaal@redhat.com>
* eval.c (evaluate_subexp_standard): Disabled evaluation of C++
function symbols before overload resolution.
2010-07-21 Pedro Alves <pedro@codesourcery.com>
* breakpoint.c (bptype_string): New, abstracted out from
print_one_breakpoint_location.
(print_one_breakpoint_location): Adjust.
(breakpoint_1): Adjust the type column width dynamically.
2010-07-20 Jan Kratochvil <jan.kratochvil@redhat.com>
* symfile.c (find_separate_debug_file_by_debuglink): Remove
a gdb_assert call, new comment.
2010-07-20 Jan Kratochvil <jan.kratochvil@redhat.com>
* linux-nat.c (linux_handle_extended_wait): Handle case when
event == PTRACE_EVENT_CLONE && stopping && WSTOPSIG (status) != SIGSTOP.
2010-07-20 Jan Kratochvil <jan.kratochvil@redhat.com>
Code cleanup.
* linux-nat.c (linux_nat_wait_1): Reset STATUS after calling
linux_nat_wait_1. Use always LP->STATUS afterwards.
2010-07-20 Hui Zhu <teawater@gmail.com>
* inf-ptrace.c (inf_ptrace_create_inferior): Initialize back_to.
(inf_ptrace_attach): Ditto.
2010-07-19 Jan Kratochvil <jan.kratochvil@redhat.com>
Make core files the process_stratum.
* corefile.c (core_target): New variable.
(core_file_command): Remove variable t, use core_target.
* corelow.c (core_ops): Make it static.
(init_core_ops): Change to process_stratum. Initialize CORE_TARGET.
* defs.h (make_cleanup_unpush_target): New prototype.
* gdbarch.h: Regenerate.
* gdbarch.sh (core_pid_to_str): Remove core_stratum from its comment.
* gdbcore.h (core_target): New declaration.
* inf-ptrace.c (inf_ptrace_create_inferior, inf_ptrace_attach): New
variables ops_already_pushed and back_to. Use push_target,
make_cleanup_unpush_target and discard_cleanups calls.
* record.c (record_open): Replace core_stratum by a core_bfd check.
* target.c (target_is_pushed): New function.
(find_core_target): Remove.
* target.h (enum strata) <core_stratum>: Remove.
(target_is_pushed): New declaration.
(find_core_target): Remove declaration.
* tracepoint.c (init_tfile_ops) <to_stratum>: Remove comment.
* utils.c (do_unpush_target, make_cleanup_unpush_target): New functions.
2010-07-19 Hui Zhu <teawater@gmail.com>
* breakpoint.c (single_step_breakpoints_inserted): New
function.
* breakpoint.h (single_step_breakpoints_inserted): Extern.
* infrun.c (maybe_software_singlestep): Add check code.
* record.c (record_resume): Add code for software single step.
(record_wait): Ditto.
2010-07-18 Jan Kratochvil <jan.kratochvil@redhat.com>
* linux-nat.c (linux_handle_extended_wait): Move variable new_lp into
a more inner block. Remove its unused declaration initializer.
2010-07-16 Thiago Jung Bauermann <bauerman@br.ibm.com>
* NEWS: Mention support for the new ptrace interface and hardware
accelerated watchpoint conditions on powerpc-linux.
2010-07-16 Ozkan Sezer <sezeroz@gmail.com>
* target.c (debug_to_insert_breakpoint): Instead of casting to unsigned
long and %ld, use core_addr_to_string() and %s to print CORE_ADDR vars
and host_address_to_string() and %s for pointers.
(debug_to_remove_breakpoint): Likewise.
(debug_to_region_ok_for_hw_watchpoint): Likewise.
(debug_to_can_accel_watchpoint_condition): Likewise.
(debug_to_stopped_data_address): Likewise.
(debug_to_watchpoint_addr_within_range): Likewise.
(debug_to_insert_hw_breakpoint): Likewise.
(debug_to_remove_hw_breakpoint): Likewise.
(debug_to_insert_watchpoint): Likewise.
(debug_to_remove_watchpoint): Likewise.
2010-07-16 Sami Wagiaalla <swagiaal@redhat.com>
* symtab.h (symbol_set_demangled_name): Now takes an optional objfile*
argument.
(cplus_specific): New struct.
* symtab.c (symbol_set_demangled_name): Updated.
Use cplus_specific for cplus symbols.
(symbol_get_demangled_name): Retrive the name from the cplus_specific
struct for cplus symbols.
(symbol_init_language_specific): Set cplus_specific for cplus symbols.
(symbol_set_names): Pass objfile to symbol_set_demangled_name.
* symtab.c (symbol_init_cplus_specific): New function.
2010-07-16 Sami Wagiaalla <swagiaal@redhat.com>
* symtab.h (symbol_set_demangled_name): New function.
(symbol_get_demangled_name): New function.
* symtab.c (symbol_set_demangled_name): New function.
(symbol_get_demangled_name): New function.
(symbol_init_language_specific): Use demangled_name setter and getter.
(symbol_set_names): Ditto.
(symbol_natural_name): Ditto.
(symbol_demangled_name): Ditto.
* dwarf2read.c (new_symbol): Ditto.
2010-07-16 Sami Wagiaalla <swagiaal@redhat.com>
* symtab.h: Renamed cplus_specific to mangled_lang.
* symtab.c (symbol_init_language_specific): Updated.
(symbol_set_names): Updated.
(symbol_natural_name): Updated.
(symbol_demangled_name): Updated.
* ada-lang.c (ada_decode_symbol): Updated.
* dwarf2read.c (new_symbol): Updated.
2010-07-14 Ken Werner <ken.werner@de.ibm.com>
* valops.c (value_assign): Do not call to value_coerce_to_target.
(value_must_coerce_to_target): Return 0 in case of TYPE_VECTOR.
2010-07-14 Ken Werner <ken.werner@de.ibm.com>
* MAINTAINERS: Add myself for write after approval privileges.
2010-07-13 Emmanuel Thomé <Emmanuel.Thome@gmail.com>
* c-valprint.c (c_val_print): Add embedded_offset to address in
call to val_print_array_elements.
2010-07-13 Tom Tromey <tromey@redhat.com>
* dwarf2read.c (dwarf2_read_index): Correctly set 'total_size'.
2010-07-13 Tom Tromey <tromey@redhat.com>
* dwarf2read.c (dwarf2_per_cu_text_offset): Fix reference to
objfile.
2010-07-13 Tom Tromey <tromey@redhat.com>
* symfile.c (set_initial_language): Update.
(deduce_language_from_filename): Argument type now const.
* symtab.h (find_main_filename): Update.
(deduce_language_from_filename): Update.
* symtab.c (find_main_filename): Make result const.
* dwarf2read.c (dw2_find_symbol_file): Change return type.
* psymtab.c (find_symbol_file_from_partial): Change return type.
* symfile.h (struct quick_symbol_functions) <find_symbol_file>:
Make result const.
2010-07-13 Tom Tromey <tromey@redhat.com>
* breakpoint.c (save_cmdlist): No longer static.
* gdbcmd.h (save_cmdlist): Declare.
* symfile.c (symbol_file_add_with_addrs_or_offsets): Set
OBJF_READNOW on objfile if readnow_symbol_files.
* elfread.c (elf_symfile_read): Use dwarf2_initialize_objfile.
(elf_sym_fns_gdb_index): New global.
* dwarf2read.c: Include exceptions.h.
(offset_type): New.
(struct mapped_index): New.
(dwarf2_per_cu_data_ptr): New typedef.
(struct dwarf2_per_objfile) <using_index, index_table, gdb_index>:
New fields.
(GDB_INDEX_SECTION): New define.
(struct dwarf2_per_cu_quick_data): New.
(struct dwarf2_per_cu_data) <objfile>: New field.
<psymtab>: Removed.
<v>: New field.
(byte_swap): New function.
(MAYBE_SWAP): New macro.
(INDEX_SUFFIX): New macro.
(dw2_do_instantiate_symtab): New function.
(dw2_instantiate_symtab): Likewise.
(create_cus_from_index): Likewise.
(create_addrmap_from_index): Likewise.
(mapped_index_string_hash): Likewise.
(find_slot_in_mapped_hash): Likewise.
(dwarf2_read_index): Likewise.
(dw2_setup): Likewise.
(dw2_require_line_header): Likewise.
(dw2_require_full_path): Likewise.
(dw2_find_last_source_symtab): Likewise.
(dw2_forget_cached_source_info): Likewise.
(dw2_lookup_symtab): Likewise.
(dw2_lookup_symbol): Likewise.
(dw2_do_expand_symtabs_matching): Likewise.
(dw2_pre_expand_symtabs_matching): Likewise.