//===-- lldb-enumerations.h -------------------------------------*- C++ -*-===//
//
// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
// See https://llvm.org/LICENSE.txt for license information.
// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
//
//===----------------------------------------------------------------------===//

#ifndef LLDB_lldb_enumerations_h_
#define LLDB_lldb_enumerations_h_

#include <type_traits>

#ifndef SWIG
// Macro to enable bitmask operations on an enum.  Without this, Enum | Enum
// gets promoted to an int, so you have to say Enum a = Enum(eFoo | eBar).  If
// you mark Enum with LLDB_MARK_AS_BITMASK_ENUM(Enum), however, you can simply
// write Enum a = eFoo | eBar.
// Unfortunately, swig<3.0 doesn't recognise the constexpr keyword, so remove
// this entire block, as it is not necessary for swig processing.
#define LLDB_MARK_AS_BITMASK_ENUM(Enum)                                        \
  constexpr Enum operator|(Enum a, Enum b) {                                   \
    return static_cast<Enum>(                                                  \
        static_cast<std::underlying_type<Enum>::type>(a) |                     \
        static_cast<std::underlying_type<Enum>::type>(b));                     \
  }                                                                            \
  constexpr Enum operator&(Enum a, Enum b) {                                   \
    return static_cast<Enum>(                                                  \
        static_cast<std::underlying_type<Enum>::type>(a) &                     \
        static_cast<std::underlying_type<Enum>::type>(b));                     \
  }                                                                            \
  constexpr Enum operator~(Enum a) {                                           \
    return static_cast<Enum>(                                                  \
        ~static_cast<std::underlying_type<Enum>::type>(a));                    \
  }                                                                            \
  inline Enum &operator|=(Enum &a, Enum b) {                                   \
    a = a | b;                                                                 \
    return a;                                                                  \
  }                                                                            \
  inline Enum &operator&=(Enum &a, Enum b) {                                   \
    a = a & b;                                                                 \
    return a;                                                                  \
  }
#else
#define LLDB_MARK_AS_BITMASK_ENUM(Enum)
#endif

#ifndef SWIG
// With MSVC, the default type of an enum is always signed, even if one of the
// enumerator values is too large to fit into a signed integer but would
// otherwise fit into an unsigned integer.  As a result of this, all of LLDB's
// flag-style enumerations that specify something like eValueFoo = 1u << 31
// result in negative values.  This usually just results in a benign warning,
// but in a few places we actually do comparisons on the enum values, which
// would cause a real bug.  Furthermore, there's no way to silence only this
// warning, as it's part of -Wmicrosoft which also catches a whole slew of
// other useful issues.
//
// To make matters worse, early versions of SWIG don't recognize the syntax of
// specifying the underlying type of an enum (and Python doesn't care anyway)
// so we need a way to specify the underlying type when the enum is being used
// from C++ code, but just use a regular enum when swig is pre-processing.
#define FLAGS_ENUM(Name) enum Name : unsigned
#define FLAGS_ANONYMOUS_ENUM() enum : unsigned
#else
#define FLAGS_ENUM(Name) enum Name
#define FLAGS_ANONYMOUS_ENUM() enum
#endif

namespace lldb {

//----------------------------------------------------------------------
// Process and Thread States
//----------------------------------------------------------------------
enum StateType {
  eStateInvalid = 0,
  eStateUnloaded,  ///< Process is object is valid, but not currently loaded
  eStateConnected, ///< Process is connected to remote debug services, but not
                   ///launched or attached to anything yet
  eStateAttaching, ///< Process is currently trying to attach
  eStateLaunching, ///< Process is in the process of launching
  // The state changes eStateAttaching and eStateLaunching are both sent while the
  // private state thread is either not yet started or paused. For that reason, they
  // should only be signaled as public state changes, and not private state changes.
  eStateStopped,   ///< Process or thread is stopped and can be examined.
  eStateRunning,   ///< Process or thread is running and can't be examined.
  eStateStepping,  ///< Process or thread is in the process of stepping and can
                   ///not be examined.
  eStateCrashed,   ///< Process or thread has crashed and can be examined.
  eStateDetached,  ///< Process has been detached and can't be examined.
  eStateExited,    ///< Process has exited and can't be examined.
  eStateSuspended, ///< Process or thread is in a suspended state as far
                   ///< as the debugger is concerned while other processes
                   ///< or threads get the chance to run.
  kLastStateType = eStateSuspended
};

//----------------------------------------------------------------------
// Launch Flags
//----------------------------------------------------------------------
FLAGS_ENUM(LaunchFlags){
    eLaunchFlagNone = 0u,
    eLaunchFlagExec = (1u << 0),  ///< Exec when launching and turn the calling
                                  ///process into a new process
    eLaunchFlagDebug = (1u << 1), ///< Stop as soon as the process launches to
                                  ///allow the process to be debugged
    eLaunchFlagStopAtEntry = (1u << 2), ///< Stop at the program entry point
                                        ///instead of auto-continuing when
                                        ///launching or attaching at entry point
    eLaunchFlagDisableASLR =
        (1u << 3), ///< Disable Address Space Layout Randomization
    eLaunchFlagDisableSTDIO =
        (1u << 4), ///< Disable stdio for inferior process (e.g. for a GUI app)
    eLaunchFlagLaunchInTTY =
        (1u << 5), ///< Launch the process in a new TTY if supported by the host
    eLaunchFlagLaunchInShell =
        (1u << 6), ///< Launch the process inside a shell to get shell expansion
    eLaunchFlagLaunchInSeparateProcessGroup =
        (1u << 7), ///< Launch the process in a separate process group
    eLaunchFlagDontSetExitStatus = (1u << 8), ///< If you are going to hand the
                                              ///process off (e.g. to
                                              ///debugserver)
    ///< set this flag so lldb & the handee don't race to set its exit status.
    eLaunchFlagDetachOnError = (1u << 9), ///< If set, then the client stub
                                          ///should detach rather than killing
                                          ///the debugee
                                          ///< if it loses connection with lldb.
    eLaunchFlagShellExpandArguments =
        (1u << 10), ///< Perform shell-style argument expansion
    eLaunchFlagCloseTTYOnExit = (1u << 11), ///< Close the open TTY on exit
};

//----------------------------------------------------------------------
// Thread Run Modes
//----------------------------------------------------------------------
enum RunMode { eOnlyThisThread, eAllThreads, eOnlyDuringStepping };

//----------------------------------------------------------------------
// Byte ordering definitions
//----------------------------------------------------------------------
enum ByteOrder {
  eByteOrderInvalid = 0,
  eByteOrderBig = 1,
  eByteOrderPDP = 2,
  eByteOrderLittle = 4
};

//----------------------------------------------------------------------
// Register encoding definitions
//----------------------------------------------------------------------
enum Encoding {
  eEncodingInvalid = 0,
  eEncodingUint,    // unsigned integer
  eEncodingSint,    // signed integer
  eEncodingIEEE754, // float
  eEncodingVector   // vector registers
};

//----------------------------------------------------------------------
// Display format definitions
//----------------------------------------------------------------------
enum Format {
  eFormatDefault = 0,
  eFormatInvalid = 0,
  eFormatBoolean,
  eFormatBinary,
  eFormatBytes,
  eFormatBytesWithASCII,
  eFormatChar,
  eFormatCharPrintable, // Only printable characters, space if not printable
  eFormatComplex,       // Floating point complex type
  eFormatComplexFloat = eFormatComplex,
  eFormatCString, // NULL terminated C strings
  eFormatDecimal,
  eFormatEnum,
  eFormatHex,
  eFormatHexUppercase,
  eFormatFloat,
  eFormatOctal,
  eFormatOSType, // OS character codes encoded into an integer 'PICT' 'text'
                 // etc...
  eFormatUnicode16,
  eFormatUnicode32,
  eFormatUnsigned,
  eFormatPointer,
  eFormatVectorOfChar,
  eFormatVectorOfSInt8,
  eFormatVectorOfUInt8,
  eFormatVectorOfSInt16,
  eFormatVectorOfUInt16,
  eFormatVectorOfSInt32,
  eFormatVectorOfUInt32,
  eFormatVectorOfSInt64,
  eFormatVectorOfUInt64,
  eFormatVectorOfFloat16,
  eFormatVectorOfFloat32,
  eFormatVectorOfFloat64,
  eFormatVectorOfUInt128,
  eFormatComplexInteger, // Integer complex type
  eFormatCharArray,      // Print characters with no single quotes, used for
                         // character arrays that can contain non printable
                         // characters
  eFormatAddressInfo, // Describe what an address points to (func + offset with
                      // file/line, symbol + offset, data, etc)
  eFormatHexFloat,    // ISO C99 hex float string
  eFormatInstruction, // Disassemble an opcode
  eFormatVoid,        // Do not print this
  kNumFormats
};

//----------------------------------------------------------------------
// Description levels for "void GetDescription(Stream *, DescriptionLevel)"
// calls
//----------------------------------------------------------------------
enum DescriptionLevel {
  eDescriptionLevelBrief = 0,
  eDescriptionLevelFull,
  eDescriptionLevelVerbose,
  eDescriptionLevelInitial,
  kNumDescriptionLevels
};

//----------------------------------------------------------------------
// Script interpreter types
//----------------------------------------------------------------------
enum ScriptLanguage {
  eScriptLanguageNone,
  eScriptLanguagePython,
  eScriptLanguageDefault = eScriptLanguagePython,
  eScriptLanguageUnknown
};

//----------------------------------------------------------------------
// Register numbering types
// See RegisterContext::ConvertRegisterKindToRegisterNumber to convert any of
// these to the lldb internal register numbering scheme (eRegisterKindLLDB).
//----------------------------------------------------------------------
enum RegisterKind {
  eRegisterKindEHFrame = 0, // the register numbers seen in eh_frame
  eRegisterKindDWARF,       // the register numbers seen DWARF
  eRegisterKindGeneric, // insn ptr reg, stack ptr reg, etc not specific to any
                        // particular target
  eRegisterKindProcessPlugin, // num used by the process plugin - e.g. by the
                              // remote gdb-protocol stub program
  eRegisterKindLLDB,          // lldb's internal register numbers
  kNumRegisterKinds
};

//----------------------------------------------------------------------
// Thread stop reasons
//----------------------------------------------------------------------
enum StopReason {
  eStopReasonInvalid = 0,
  eStopReasonNone,
  eStopReasonTrace,
  eStopReasonBreakpoint,
  eStopReasonWatchpoint,
  eStopReasonSignal,
  eStopReasonException,
  eStopReasonExec, // Program was re-exec'ed
  eStopReasonPlanComplete,
  eStopReasonThreadExiting,
  eStopReasonInstrumentation
};

//----------------------------------------------------------------------
// Command Return Status Types
//----------------------------------------------------------------------
enum ReturnStatus {
  eReturnStatusInvalid,
  eReturnStatusSuccessFinishNoResult,
  eReturnStatusSuccessFinishResult,
  eReturnStatusSuccessContinuingNoResult,
  eReturnStatusSuccessContinuingResult,
  eReturnStatusStarted,
  eReturnStatusFailed,
  eReturnStatusQuit
};

//----------------------------------------------------------------------
// The results of expression evaluation:
//----------------------------------------------------------------------
enum ExpressionResults {
  eExpressionCompleted = 0,
  eExpressionSetupError,
  eExpressionParseError,
  eExpressionDiscarded,
  eExpressionInterrupted,
  eExpressionHitBreakpoint,
  eExpressionTimedOut,
  eExpressionResultUnavailable,
  eExpressionStoppedForDebug
};

enum SearchDepth {
    eSearchDepthInvalid = 0,
    eSearchDepthTarget,
    eSearchDepthModule,
    eSearchDepthCompUnit,
    eSearchDepthFunction,
    eSearchDepthBlock,
    eSearchDepthAddress,
    kLastSearchDepthKind = eSearchDepthAddress
};

//----------------------------------------------------------------------
// Connection Status Types
//----------------------------------------------------------------------
enum ConnectionStatus {
  eConnectionStatusSuccess,        // Success
  eConnectionStatusEndOfFile,      // End-of-file encountered
  eConnectionStatusError,          // Check GetError() for details
  eConnectionStatusTimedOut,       // Request timed out
  eConnectionStatusNoConnection,   // No connection
  eConnectionStatusLostConnection, // Lost connection while connected to a valid
                                   // connection
  eConnectionStatusInterrupted     // Interrupted read
};

enum ErrorType {
  eErrorTypeInvalid,
  eErrorTypeGeneric,    ///< Generic errors that can be any value.
  eErrorTypeMachKernel, ///< Mach kernel error codes.
  eErrorTypePOSIX,      ///< POSIX error codes.
  eErrorTypeExpression, ///< These are from the ExpressionResults enum.
  eErrorTypeWin32       ///< Standard Win32 error codes.
};

enum ValueType {
  eValueTypeInvalid = 0,
  eValueTypeVariableGlobal = 1,   // globals variable
  eValueTypeVariableStatic = 2,   // static variable
  eValueTypeVariableArgument = 3, // function argument variables
  eValueTypeVariableLocal = 4,    // function local variables
  eValueTypeRegister = 5,         // stack frame register value
  eValueTypeRegisterSet = 6,      // A collection of stack frame register values
  eValueTypeConstResult = 7,      // constant result variables
  eValueTypeVariableThreadLocal = 8 // thread local storage variable
};

//----------------------------------------------------------------------
// Token size/granularities for Input Readers
//----------------------------------------------------------------------

enum InputReaderGranularity {
  eInputReaderGranularityInvalid = 0,
  eInputReaderGranularityByte,
  eInputReaderGranularityWord,
  eInputReaderGranularityLine,
  eInputReaderGranularityAll
};

//------------------------------------------------------------------
/// These mask bits allow a common interface for queries that can
/// limit the amount of information that gets parsed to only the
/// information that is requested. These bits also can indicate what
/// actually did get resolved during query function calls.
///
/// Each definition corresponds to a one of the member variables
/// in this class, and requests that that item be resolved, or
/// indicates that the member did get resolved.
//------------------------------------------------------------------
FLAGS_ENUM(SymbolContextItem){
    eSymbolContextTarget = (1u << 0), ///< Set when \a target is requested from
                                      /// a query, or was located in query
                                      /// results
    eSymbolContextModule = (1u << 1), ///< Set when \a module is requested from
                                      /// a query, or was located in query
                                      /// results
    eSymbolContextCompUnit = (1u << 2), ///< Set when \a comp_unit is requested
                                        /// from a query, or was located in
                                        /// query results
    eSymbolContextFunction = (1u << 3), ///< Set when \a function is requested
                                        /// from a query, or was located in
                                        /// query results
    eSymbolContextBlock = (1u << 4),    ///< Set when the deepest \a block is
                                     /// requested from a query, or was located
                                     /// in query results
    eSymbolContextLineEntry = (1u << 5), ///< Set when \a line_entry is
                                         /// requested from a query, or was
                                         /// located in query results
    eSymbolContextSymbol = (1u << 6), ///< Set when \a symbol is requested from
                                      /// a query, or was located in query
                                      /// results
    eSymbolContextEverything = ((eSymbolContextSymbol << 1) -
                                1u), ///< Indicates to try and lookup everything
                                     /// up during a routine symbol context
                                     /// query.
    eSymbolContextVariable = (1u << 7), ///< Set when \a global or static
                                        /// variable is requested from a query,
                                        /// or was located in query results.
    ///< eSymbolContextVariable is potentially expensive to lookup so it isn't
    /// included in
    ///< eSymbolContextEverything which stops it from being used during frame PC
    /// lookups and
    ///< many other potential address to symbol context lookups.
};
LLDB_MARK_AS_BITMASK_ENUM(SymbolContextItem)

FLAGS_ENUM(Permissions){ePermissionsWritable = (1u << 0),
                        ePermissionsReadable = (1u << 1),
                        ePermissionsExecutable = (1u << 2)};
LLDB_MARK_AS_BITMASK_ENUM(Permissions)

enum InputReaderAction {
  eInputReaderActivate, // reader is newly pushed onto the reader stack
  eInputReaderAsynchronousOutputWritten, // an async output event occurred; the
                                         // reader may want to do something
  eInputReaderReactivate, // reader is on top of the stack again after another
                          // reader was popped off
  eInputReaderDeactivate, // another reader was pushed on the stack
  eInputReaderGotToken,   // reader got one of its tokens (granularity)
  eInputReaderInterrupt, // reader received an interrupt signal (probably from a
                         // control-c)
  eInputReaderEndOfFile, // reader received an EOF char (probably from a
                         // control-d)
  eInputReaderDone       // reader was just popped off the stack and is done
};

FLAGS_ENUM(BreakpointEventType){
    eBreakpointEventTypeInvalidType = (1u << 0),
    eBreakpointEventTypeAdded = (1u << 1),
    eBreakpointEventTypeRemoved = (1u << 2),
    eBreakpointEventTypeLocationsAdded = (1u << 3), // Locations added doesn't
                                                    // get sent when the
                                                    // breakpoint is created
    eBreakpointEventTypeLocationsRemoved = (1u << 4),
    eBreakpointEventTypeLocationsResolved = (1u << 5),
    eBreakpointEventTypeEnabled = (1u << 6),
    eBreakpointEventTypeDisabled = (1u << 7),
    eBreakpointEventTypeCommandChanged = (1u << 8),
    eBreakpointEventTypeConditionChanged = (1u << 9),
    eBreakpointEventTypeIgnoreChanged = (1u << 10),
    eBreakpointEventTypeThreadChanged = (1u << 11),
    eBreakpointEventTypeAutoContinueChanged = (1u << 12)};

FLAGS_ENUM(WatchpointEventType){
    eWatchpointEventTypeInvalidType = (1u << 0),
    eWatchpointEventTypeAdded = (1u << 1),
    eWatchpointEventTypeRemoved = (1u << 2),
    eWatchpointEventTypeEnabled = (1u << 6),
    eWatchpointEventTypeDisabled = (1u << 7),
    eWatchpointEventTypeCommandChanged = (1u << 8),
    eWatchpointEventTypeConditionChanged = (1u << 9),
    eWatchpointEventTypeIgnoreChanged = (1u << 10),
    eWatchpointEventTypeThreadChanged = (1u << 11),
    eWatchpointEventTypeTypeChanged = (1u << 12)};

//----------------------------------------------------------------------
/// Programming language type.
///
/// These enumerations use the same language enumerations as the DWARF
/// specification for ease of use and consistency.
/// The enum -> string code is in Language.cpp, don't change this
/// table without updating that code as well.
//----------------------------------------------------------------------
enum LanguageType {
  eLanguageTypeUnknown = 0x0000,        ///< Unknown or invalid language value.
  eLanguageTypeC89 = 0x0001,            ///< ISO C:1989.
  eLanguageTypeC = 0x0002,              ///< Non-standardized C, such as K&R.
  eLanguageTypeAda83 = 0x0003,          ///< ISO Ada:1983.
  eLanguageTypeC_plus_plus = 0x0004,    ///< ISO C++:1998.
  eLanguageTypeCobol74 = 0x0005,        ///< ISO Cobol:1974.
  eLanguageTypeCobol85 = 0x0006,        ///< ISO Cobol:1985.
  eLanguageTypeFortran77 = 0x0007,      ///< ISO Fortran 77.
  eLanguageTypeFortran90 = 0x0008,      ///< ISO Fortran 90.
  eLanguageTypePascal83 = 0x0009,       ///< ISO Pascal:1983.
  eLanguageTypeModula2 = 0x000a,        ///< ISO Modula-2:1996.
  eLanguageTypeJava = 0x000b,           ///< Java.
  eLanguageTypeC99 = 0x000c,            ///< ISO C:1999.
  eLanguageTypeAda95 = 0x000d,          ///< ISO Ada:1995.
  eLanguageTypeFortran95 = 0x000e,      ///< ISO Fortran 95.
  eLanguageTypePLI = 0x000f,            ///< ANSI PL/I:1976.
  eLanguageTypeObjC = 0x0010,           ///< Objective-C.
  eLanguageTypeObjC_plus_plus = 0x0011, ///< Objective-C++.
  eLanguageTypeUPC = 0x0012,            ///< Unified Parallel C.
  eLanguageTypeD = 0x0013,              ///< D.
  eLanguageTypePython = 0x0014,         ///< Python.
  // NOTE: The below are DWARF5 constants, subject to change upon
  // completion of the DWARF5 specification
  eLanguageTypeOpenCL = 0x0015,         ///< OpenCL.
  eLanguageTypeGo = 0x0016,             ///< Go.
  eLanguageTypeModula3 = 0x0017,        ///< Modula 3.
  eLanguageTypeHaskell = 0x0018,        ///< Haskell.
  eLanguageTypeC_plus_plus_03 = 0x0019, ///< ISO C++:2003.
  eLanguageTypeC_plus_plus_11 = 0x001a, ///< ISO C++:2011.
  eLanguageTypeOCaml = 0x001b,          ///< OCaml.
  eLanguageTypeRust = 0x001c,           ///< Rust.
  eLanguageTypeC11 = 0x001d,            ///< ISO C:2011.
  eLanguageTypeSwift = 0x001e,          ///< Swift.
  eLanguageTypeJulia = 0x001f,          ///< Julia.
  eLanguageTypeDylan = 0x0020,          ///< Dylan.
  eLanguageTypeC_plus_plus_14 = 0x0021, ///< ISO C++:2014.
  eLanguageTypeFortran03 = 0x0022,      ///< ISO Fortran 2003.
  eLanguageTypeFortran08 = 0x0023,      ///< ISO Fortran 2008.
  // Vendor Extensions
  // Note: Language::GetNameForLanguageType
  // assumes these can be used as indexes into array language_names, and
  // Language::SetLanguageFromCString and Language::AsCString assume these can
  // be used as indexes into array g_languages.
  eLanguageTypeMipsAssembler = 0x0024,   ///< Mips_Assembler.
  eLanguageTypeExtRenderScript = 0x0025, ///< RenderScript.
  eNumLanguageTypes
};

enum InstrumentationRuntimeType {
  eInstrumentationRuntimeTypeAddressSanitizer = 0x0000,
  eInstrumentationRuntimeTypeThreadSanitizer = 0x0001,
  eInstrumentationRuntimeTypeUndefinedBehaviorSanitizer = 0x0002,
  eInstrumentationRuntimeTypeMainThreadChecker = 0x0003,
  eInstrumentationRuntimeTypeSwiftRuntimeReporting = 0x0004,
  eNumInstrumentationRuntimeTypes
};

enum DynamicValueType {
  eNoDynamicValues = 0,
  eDynamicCanRunTarget = 1,
  eDynamicDontRunTarget = 2
};

enum StopShowColumn {
  eStopShowColumnAnsiOrCaret = 0,
  eStopShowColumnAnsi = 1,
  eStopShowColumnCaret = 2,
  eStopShowColumnNone = 3
};

enum AccessType {
  eAccessNone,
  eAccessPublic,
  eAccessPrivate,
  eAccessProtected,
  eAccessPackage
};

enum CommandArgumentType {
  eArgTypeAddress = 0,
  eArgTypeAddressOrExpression,
  eArgTypeAliasName,
  eArgTypeAliasOptions,
  eArgTypeArchitecture,
  eArgTypeBoolean,
  eArgTypeBreakpointID,
  eArgTypeBreakpointIDRange,
  eArgTypeBreakpointName,
  eArgTypeByteSize,
  eArgTypeClassName,
  eArgTypeCommandName,
  eArgTypeCount,
  eArgTypeDescriptionVerbosity,
  eArgTypeDirectoryName,
  eArgTypeDisassemblyFlavor,
  eArgTypeEndAddress,
  eArgTypeExpression,
  eArgTypeExpressionPath,
  eArgTypeExprFormat,
  eArgTypeFilename,
  eArgTypeFormat,
  eArgTypeFrameIndex,
  eArgTypeFullName,
  eArgTypeFunctionName,
  eArgTypeFunctionOrSymbol,
  eArgTypeGDBFormat,
  eArgTypeHelpText,
  eArgTypeIndex,
  eArgTypeLanguage,
  eArgTypeLineNum,
  eArgTypeLogCategory,
  eArgTypeLogChannel,
  eArgTypeMethod,
  eArgTypeName,
  eArgTypeNewPathPrefix,
  eArgTypeNumLines,
  eArgTypeNumberPerLine,
  eArgTypeOffset,
  eArgTypeOldPathPrefix,
  eArgTypeOneLiner,
  eArgTypePath,
  eArgTypePermissionsNumber,
  eArgTypePermissionsString,
  eArgTypePid,
  eArgTypePlugin,
  eArgTypeProcessName,
  eArgTypePythonClass,
  eArgTypePythonFunction,
  eArgTypePythonScript,
  eArgTypeQueueName,
  eArgTypeRegisterName,
  eArgTypeRegularExpression,
  eArgTypeRunArgs,
  eArgTypeRunMode,
  eArgTypeScriptedCommandSynchronicity,
  eArgTypeScriptLang,
  eArgTypeSearchWord,
  eArgTypeSelector,
  eArgTypeSettingIndex,
  eArgTypeSettingKey,
  eArgTypeSettingPrefix,
  eArgTypeSettingVariableName,
  eArgTypeShlibName,
  eArgTypeSourceFile,
  eArgTypeSortOrder,
  eArgTypeStartAddress,
  eArgTypeSummaryString,
  eArgTypeSymbol,
  eArgTypeThreadID,
  eArgTypeThreadIndex,
  eArgTypeThreadName,
  eArgTypeTypeName,
  eArgTypeUnsignedInteger,
  eArgTypeUnixSignal,
  eArgTypeVarName,
  eArgTypeValue,
  eArgTypeWidth,
  eArgTypeNone,
  eArgTypePlatform,
  eArgTypeWatchpointID,
  eArgTypeWatchpointIDRange,
  eArgTypeWatchType,
  eArgRawInput,
  eArgTypeCommand,
  eArgTypeLastArg // Always keep this entry as the last entry in this
                  // enumeration!!
};

//----------------------------------------------------------------------
// Symbol types
//----------------------------------------------------------------------
enum SymbolType {
  eSymbolTypeAny = 0,
  eSymbolTypeInvalid = 0,
  eSymbolTypeAbsolute,
  eSymbolTypeCode,
  eSymbolTypeResolver,
  eSymbolTypeData,
  eSymbolTypeTrampoline,
  eSymbolTypeRuntime,
  eSymbolTypeException,
  eSymbolTypeSourceFile,
  eSymbolTypeHeaderFile,
  eSymbolTypeObjectFile,
  eSymbolTypeCommonBlock,
  eSymbolTypeBlock,
  eSymbolTypeLocal,
  eSymbolTypeParam,
  eSymbolTypeVariable,
  eSymbolTypeVariableType,
  eSymbolTypeLineEntry,
  eSymbolTypeLineHeader,
  eSymbolTypeScopeBegin,
  eSymbolTypeScopeEnd,
  eSymbolTypeAdditional, // When symbols take more than one entry, the extra
                         // entries get this type
  eSymbolTypeCompiler,
  eSymbolTypeInstrumentation,
  eSymbolTypeUndefined,
  eSymbolTypeObjCClass,
  eSymbolTypeObjCMetaClass,
  eSymbolTypeObjCIVar,
  eSymbolTypeReExported
};

enum SectionType {
  eSectionTypeInvalid,
  eSectionTypeCode,
  eSectionTypeContainer, // The section contains child sections
  eSectionTypeData,
  eSectionTypeDataCString,         // Inlined C string data
  eSectionTypeDataCStringPointers, // Pointers to C string data
  eSectionTypeDataSymbolAddress,   // Address of a symbol in the symbol table
  eSectionTypeData4,
  eSectionTypeData8,
  eSectionTypeData16,
  eSectionTypeDataPointers,
  eSectionTypeDebug,
  eSectionTypeZeroFill,
  eSectionTypeDataObjCMessageRefs, // Pointer to function pointer + selector
  eSectionTypeDataObjCCFStrings, // Objective-C const CFString/NSString objects
  eSectionTypeDWARFDebugAbbrev,
  eSectionTypeDWARFDebugAddr,
  eSectionTypeDWARFDebugAranges,
  eSectionTypeDWARFDebugCuIndex,
  eSectionTypeDWARFDebugFrame,
  eSectionTypeDWARFDebugInfo,
  eSectionTypeDWARFDebugLine,
  eSectionTypeDWARFDebugLoc,
  eSectionTypeDWARFDebugMacInfo,
  eSectionTypeDWARFDebugMacro,
  eSectionTypeDWARFDebugPubNames,
  eSectionTypeDWARFDebugPubTypes,
  eSectionTypeDWARFDebugRanges,
  eSectionTypeDWARFDebugStr,
  eSectionTypeDWARFDebugStrOffsets,
  eSectionTypeDWARFAppleNames,
  eSectionTypeDWARFAppleTypes,
  eSectionTypeDWARFAppleNamespaces,
  eSectionTypeDWARFAppleObjC,
  eSectionTypeELFSymbolTable,       // Elf SHT_SYMTAB section
  eSectionTypeELFDynamicSymbols,    // Elf SHT_DYNSYM section
  eSectionTypeELFRelocationEntries, // Elf SHT_REL or SHT_REL section
  eSectionTypeELFDynamicLinkInfo,   // Elf SHT_DYNAMIC section
  eSectionTypeEHFrame,
  eSectionTypeARMexidx,
  eSectionTypeARMextab,
  eSectionTypeCompactUnwind, // compact unwind section in Mach-O,
                             // __TEXT,__unwind_info
  eSectionTypeGoSymtab,
  eSectionTypeAbsoluteAddress, // Dummy section for symbols with absolute
                               // address
  eSectionTypeDWARFGNUDebugAltLink,
  eSectionTypeDWARFDebugTypes, // DWARF .debug_types section
  eSectionTypeDWARFDebugNames, // DWARF v5 .debug_names
  eSectionTypeOther,
  eSectionTypeDWARFDebugLineStr, // DWARF v5 .debug_line_str
  eSectionTypeDWARFDebugRngLists, // DWARF v5 .debug_rnglists
  eSectionTypeDWARFDebugLocLists, // DWARF v5 .debug_loclists
  eSectionTypeDWARFDebugAbbrevDwo,
  eSectionTypeDWARFDebugInfoDwo,
  eSectionTypeDWARFDebugStrDwo,
  eSectionTypeDWARFDebugStrOffsetsDwo,
};

FLAGS_ENUM(EmulateInstructionOptions){
    eEmulateInstructionOptionNone = (0u),
    eEmulateInstructionOptionAutoAdvancePC = (1u << 0),
    eEmulateInstructionOptionIgnoreConditions = (1u << 1)};

FLAGS_ENUM(FunctionNameType){
    eFunctionNameTypeNone = 0u,
    eFunctionNameTypeAuto =
        (1u << 1), // Automatically figure out which FunctionNameType
                   // bits to set based on the function name.
    eFunctionNameTypeFull = (1u << 2), // The function name.
    // For C this is the same as just the name of the function For C++ this is
    // the mangled or demangled version of the mangled name. For ObjC this is
    // the full function signature with the + or - and the square brackets and
    // the class and selector
    eFunctionNameTypeBase = (1u << 3), // The function name only, no namespaces
                                       // or arguments and no class
                                       // methods or selectors will be searched.
    eFunctionNameTypeMethod = (1u << 4), // Find function by method name (C++)
                                         // with no namespace or arguments
    eFunctionNameTypeSelector =
        (1u << 5), // Find function by selector name (ObjC) names
    eFunctionNameTypeAny =
        eFunctionNameTypeAuto // DEPRECATED: use eFunctionNameTypeAuto
};
LLDB_MARK_AS_BITMASK_ENUM(FunctionNameType)

//----------------------------------------------------------------------
// Basic types enumeration for the public API SBType::GetBasicType()
//----------------------------------------------------------------------
enum BasicType {
  eBasicTypeInvalid = 0,
  eBasicTypeVoid = 1,
  eBasicTypeChar,
  eBasicTypeSignedChar,
  eBasicTypeUnsignedChar,
  eBasicTypeWChar,
  eBasicTypeSignedWChar,
  eBasicTypeUnsignedWChar,
  eBasicTypeChar16,
  eBasicTypeChar32,
  eBasicTypeShort,
  eBasicTypeUnsignedShort,
  eBasicTypeInt,
  eBasicTypeUnsignedInt,
  eBasicTypeLong,
  eBasicTypeUnsignedLong,
  eBasicTypeLongLong,
  eBasicTypeUnsignedLongLong,
  eBasicTypeInt128,
  eBasicTypeUnsignedInt128,
  eBasicTypeBool,
  eBasicTypeHalf,
  eBasicTypeFloat,
  eBasicTypeDouble,
  eBasicTypeLongDouble,
  eBasicTypeFloatComplex,
  eBasicTypeDoubleComplex,
  eBasicTypeLongDoubleComplex,
  eBasicTypeObjCID,
  eBasicTypeObjCClass,
  eBasicTypeObjCSel,
  eBasicTypeNullPtr,
  eBasicTypeOther
};

enum TraceType {
  eTraceTypeNone = 0,

  // Hardware Trace generated by the processor.
  eTraceTypeProcessorTrace
};

enum StructuredDataType {
  eStructuredDataTypeInvalid = -1,
  eStructuredDataTypeNull = 0,
  eStructuredDataTypeGeneric,
  eStructuredDataTypeArray,
  eStructuredDataTypeInteger,
  eStructuredDataTypeFloat,
  eStructuredDataTypeBoolean,
  eStructuredDataTypeString,
  eStructuredDataTypeDictionary
};

FLAGS_ENUM(TypeClass){
    eTypeClassInvalid = (0u), eTypeClassArray = (1u << 0),
    eTypeClassBlockPointer = (1u << 1), eTypeClassBuiltin = (1u << 2),
    eTypeClassClass = (1u << 3), eTypeClassComplexFloat = (1u << 4),
    eTypeClassComplexInteger = (1u << 5), eTypeClassEnumeration = (1u << 6),
    eTypeClassFunction = (1u << 7), eTypeClassMemberPointer = (1u << 8),
    eTypeClassObjCObject = (1u << 9), eTypeClassObjCInterface = (1u << 10),
    eTypeClassObjCObjectPointer = (1u << 11), eTypeClassPointer = (1u << 12),
    eTypeClassReference = (1u << 13), eTypeClassStruct = (1u << 14),
    eTypeClassTypedef = (1u << 15), eTypeClassUnion = (1u << 16),
    eTypeClassVector = (1u << 17),
    // Define the last type class as the MSBit of a 32 bit value
    eTypeClassOther = (1u << 31),
    // Define a mask that can be used for any type when finding types
    eTypeClassAny = (0xffffffffu)};
LLDB_MARK_AS_BITMASK_ENUM(TypeClass)

enum TemplateArgumentKind {
  eTemplateArgumentKindNull = 0,
  eTemplateArgumentKindType,
  eTemplateArgumentKindDeclaration,
  eTemplateArgumentKindIntegral,
  eTemplateArgumentKindTemplate,
  eTemplateArgumentKindTemplateExpansion,
  eTemplateArgumentKindExpression,
  eTemplateArgumentKindPack,
  eTemplateArgumentKindNullPtr,
};

//----------------------------------------------------------------------
// Options that can be set for a formatter to alter its behavior Not all of
// these are applicable to all formatter types
//----------------------------------------------------------------------
FLAGS_ENUM(TypeOptions){eTypeOptionNone = (0u),
                        eTypeOptionCascade = (1u << 0),
                        eTypeOptionSkipPointers = (1u << 1),
                        eTypeOptionSkipReferences = (1u << 2),
                        eTypeOptionHideChildren = (1u << 3),
                        eTypeOptionHideValue = (1u << 4),
                        eTypeOptionShowOneLiner = (1u << 5),
                        eTypeOptionHideNames = (1u << 6),
                        eTypeOptionNonCacheable = (1u << 7),
                        eTypeOptionHideEmptyAggregates = (1u << 8),
                        eTypeOptionFrontEndWantsDereference = (1u << 9)
};

//----------------------------------------------------------------------
// This is the return value for frame comparisons.  If you are comparing frame
// A to frame B the following cases arise: 1) When frame A pushes frame B (or a
// frame that ends up pushing B) A is Older than B. 2) When frame A pushed
// frame B (or if frame A is on the stack but B is not) A is Younger than B 3)
// When frame A and frame B have the same StackID, they are Equal. 4) When
// frame A and frame B have the same immediate parent frame, but are not equal,
// the comparison yields
//    SameParent.
// 5) If the two frames are on different threads or processes the comparison is
// Invalid 6) If for some reason we can't figure out what went on, we return
// Unknown.
//----------------------------------------------------------------------
enum FrameComparison {
  eFrameCompareInvalid,
  eFrameCompareUnknown,
  eFrameCompareEqual,
  eFrameCompareSameParent,
  eFrameCompareYounger,
  eFrameCompareOlder
};

//----------------------------------------------------------------------
// File Permissions
//
// Designed to mimic the unix file permission bits so they can be used with
// functions that set 'mode_t' to certain values for permissions.
//----------------------------------------------------------------------
FLAGS_ENUM(FilePermissions){
    eFilePermissionsUserRead = (1u << 8), eFilePermissionsUserWrite = (1u << 7),
    eFilePermissionsUserExecute = (1u << 6),
    eFilePermissionsGroupRead = (1u << 5),
    eFilePermissionsGroupWrite = (1u << 4),
    eFilePermissionsGroupExecute = (1u << 3),
    eFilePermissionsWorldRead = (1u << 2),
    eFilePermissionsWorldWrite = (1u << 1),
    eFilePermissionsWorldExecute = (1u << 0),

    eFilePermissionsUserRW = (eFilePermissionsUserRead |
                              eFilePermissionsUserWrite | 0),
    eFileFilePermissionsUserRX = (eFilePermissionsUserRead | 0 |
                                  eFilePermissionsUserExecute),
    eFilePermissionsUserRWX = (eFilePermissionsUserRead |
                               eFilePermissionsUserWrite |
                               eFilePermissionsUserExecute),

    eFilePermissionsGroupRW = (eFilePermissionsGroupRead |
                               eFilePermissionsGroupWrite | 0),
    eFilePermissionsGroupRX = (eFilePermissionsGroupRead | 0 |
                               eFilePermissionsGroupExecute),
    eFilePermissionsGroupRWX = (eFilePermissionsGroupRead |
                                eFilePermissionsGroupWrite |
                                eFilePermissionsGroupExecute),

    eFilePermissionsWorldRW = (eFilePermissionsWorldRead |
                               eFilePermissionsWorldWrite | 0),
    eFilePermissionsWorldRX = (eFilePermissionsWorldRead | 0 |
                               eFilePermissionsWorldExecute),
    eFilePermissionsWorldRWX = (eFilePermissionsWorldRead |
                                eFilePermissionsWorldWrite |
                                eFilePermissionsWorldExecute),

    eFilePermissionsEveryoneR = (eFilePermissionsUserRead |
                                 eFilePermissionsGroupRead |
                                 eFilePermissionsWorldRead),
    eFilePermissionsEveryoneW = (eFilePermissionsUserWrite |
                                 eFilePermissionsGroupWrite |
                                 eFilePermissionsWorldWrite),
    eFilePermissionsEveryoneX = (eFilePermissionsUserExecute |
                                 eFilePermissionsGroupExecute |
                                 eFilePermissionsWorldExecute),

    eFilePermissionsEveryoneRW = (eFilePermissionsEveryoneR |
                                  eFilePermissionsEveryoneW | 0),
    eFilePermissionsEveryoneRX = (eFilePermissionsEveryoneR | 0 |
                                  eFilePermissionsEveryoneX),
    eFilePermissionsEveryoneRWX = (eFilePermissionsEveryoneR |
                                   eFilePermissionsEveryoneW |
                                   eFilePermissionsEveryoneX),
    eFilePermissionsFileDefault = eFilePermissionsUserRW,
    eFilePermissionsDirectoryDefault = eFilePermissionsUserRWX,
};

//----------------------------------------------------------------------
// Queue work item types
//
// The different types of work that can be enqueued on a libdispatch aka Grand
// Central Dispatch (GCD) queue.
//----------------------------------------------------------------------
enum QueueItemKind {
  eQueueItemKindUnknown = 0,
  eQueueItemKindFunction,
  eQueueItemKindBlock
};

//----------------------------------------------------------------------
// Queue type
// libdispatch aka Grand Central Dispatch (GCD) queues can be either serial
// (executing on one thread) or concurrent (executing on multiple threads).
//----------------------------------------------------------------------
enum QueueKind {
  eQueueKindUnknown = 0,
  eQueueKindSerial,
  eQueueKindConcurrent
};

//----------------------------------------------------------------------
// Expression Evaluation Stages
// These are the cancellable stages of expression evaluation, passed to the
// expression evaluation callback, so that you can interrupt expression
// evaluation at the various points in its lifecycle.
//----------------------------------------------------------------------
enum ExpressionEvaluationPhase {
  eExpressionEvaluationParse = 0,
  eExpressionEvaluationIRGen,
  eExpressionEvaluationExecution,
  eExpressionEvaluationComplete
};

//----------------------------------------------------------------------
// Watchpoint Kind
// Indicates what types of events cause the watchpoint to fire. Used by Native
// *Protocol-related classes.
//----------------------------------------------------------------------
FLAGS_ENUM(WatchpointKind){eWatchpointKindWrite = (1u << 0),
                           eWatchpointKindRead = (1u << 1)};

enum GdbSignal {
  eGdbSignalBadAccess = 0x91,
  eGdbSignalBadInstruction = 0x92,
  eGdbSignalArithmetic = 0x93,
  eGdbSignalEmulation = 0x94,
  eGdbSignalSoftware = 0x95,
  eGdbSignalBreakpoint = 0x96
};

//----------------------------------------------------------------------
// Used with SBHost::GetPath (lldb::PathType) to find files that are related to
// LLDB on the current host machine. Most files are relative to LLDB or are in
// known locations.
//----------------------------------------------------------------------
enum PathType {
  ePathTypeLLDBShlibDir, // The directory where the lldb.so (unix) or LLDB
                         // mach-o file in LLDB.framework (MacOSX) exists
  ePathTypeSupportExecutableDir, // Find LLDB support executable directory
                                 // (debugserver, etc)
  ePathTypeHeaderDir,            // Find LLDB header file directory
  ePathTypePythonDir,            // Find Python modules (PYTHONPATH) directory
  ePathTypeLLDBSystemPlugins,    // System plug-ins directory
  ePathTypeLLDBUserPlugins,      // User plug-ins directory
  ePathTypeLLDBTempSystemDir,    // The LLDB temp directory for this system that
                                 // will be cleaned up on exit
  ePathTypeGlobalLLDBTempSystemDir, // The LLDB temp directory for this system,
                                    // NOT cleaned up on a process exit.
  ePathTypeClangDir                 // Find path to Clang builtin headers
};

//----------------------------------------------------------------------
// Kind of member function
// Used by the type system
//----------------------------------------------------------------------
enum MemberFunctionKind {
  eMemberFunctionKindUnknown = 0,    // Not sure what the type of this is
  eMemberFunctionKindConstructor,    // A function used to create instances
  eMemberFunctionKindDestructor,     // A function used to tear down existing
                                     // instances
  eMemberFunctionKindInstanceMethod, // A function that applies to a specific
                                     // instance
  eMemberFunctionKindStaticMethod    // A function that applies to a type rather
                                     // than any instance
};

//----------------------------------------------------------------------
// String matching algorithm used by SBTarget
//----------------------------------------------------------------------
enum MatchType { eMatchTypeNormal, eMatchTypeRegex, eMatchTypeStartsWith };

//----------------------------------------------------------------------
// Bitmask that describes details about a type
//----------------------------------------------------------------------
FLAGS_ENUM(TypeFlags){
    eTypeHasChildren = (1u << 0),       eTypeHasValue = (1u << 1),
    eTypeIsArray = (1u << 2),           eTypeIsBlock = (1u << 3),
    eTypeIsBuiltIn = (1u << 4),         eTypeIsClass = (1u << 5),
    eTypeIsCPlusPlus = (1u << 6),       eTypeIsEnumeration = (1u << 7),
    eTypeIsFuncPrototype = (1u << 8),   eTypeIsMember = (1u << 9),
    eTypeIsObjC = (1u << 10),           eTypeIsPointer = (1u << 11),
    eTypeIsReference = (1u << 12),      eTypeIsStructUnion = (1u << 13),
    eTypeIsTemplate = (1u << 14),       eTypeIsTypedef = (1u << 15),
    eTypeIsVector = (1u << 16),         eTypeIsScalar = (1u << 17),
    eTypeIsInteger = (1u << 18),        eTypeIsFloat = (1u << 19),
    eTypeIsComplex = (1u << 20),        eTypeIsSigned = (1u << 21),
    eTypeInstanceIsPointer = (1u << 22)};

FLAGS_ENUM(CommandFlags){
    //----------------------------------------------------------------------
    // eCommandRequiresTarget
    //
    // Ensures a valid target is contained in m_exe_ctx prior to executing the
    // command. If a target doesn't exist or is invalid, the command will fail
    // and CommandObject::GetInvalidTargetDescription() will be returned as the
    // error. CommandObject subclasses can override the virtual function for
    // GetInvalidTargetDescription() to provide custom strings when needed.
    //----------------------------------------------------------------------
    eCommandRequiresTarget = (1u << 0),
    //----------------------------------------------------------------------
    // eCommandRequiresProcess
    //
    // Ensures a valid process is contained in m_exe_ctx prior to executing the
    // command. If a process doesn't exist or is invalid, the command will fail
    // and CommandObject::GetInvalidProcessDescription() will be returned as
    // the error. CommandObject subclasses can override the virtual function
    // for GetInvalidProcessDescription() to provide custom strings when
    // needed.
    //----------------------------------------------------------------------
    eCommandRequiresProcess = (1u << 1),
    //----------------------------------------------------------------------
    // eCommandRequiresThread
    //
    // Ensures a valid thread is contained in m_exe_ctx prior to executing the
    // command. If a thread doesn't exist or is invalid, the command will fail
    // and CommandObject::GetInvalidThreadDescription() will be returned as the
    // error. CommandObject subclasses can override the virtual function for
    // GetInvalidThreadDescription() to provide custom strings when needed.
    //----------------------------------------------------------------------
    eCommandRequiresThread = (1u << 2),
    //----------------------------------------------------------------------
    // eCommandRequiresFrame
    //
    // Ensures a valid frame is contained in m_exe_ctx prior to executing the
    // command. If a frame doesn't exist or is invalid, the command will fail
    // and CommandObject::GetInvalidFrameDescription() will be returned as the
    // error. CommandObject subclasses can override the virtual function for
    // GetInvalidFrameDescription() to provide custom strings when needed.
    //----------------------------------------------------------------------
    eCommandRequiresFrame = (1u << 3),
    //----------------------------------------------------------------------
    // eCommandRequiresRegContext
    //
    // Ensures a valid register context (from the selected frame if there is a
    // frame in m_exe_ctx, or from the selected thread from m_exe_ctx) is
    // available from m_exe_ctx prior to executing the command. If a target
    // doesn't exist or is invalid, the command will fail and
    // CommandObject::GetInvalidRegContextDescription() will be returned as the
    // error. CommandObject subclasses can override the virtual function for
    // GetInvalidRegContextDescription() to provide custom strings when needed.
    //----------------------------------------------------------------------
    eCommandRequiresRegContext = (1u << 4),
    //----------------------------------------------------------------------
    // eCommandTryTargetAPILock
    //
    // Attempts to acquire the target lock if a target is selected in the
    // command interpreter. If the command object fails to acquire the API
    // lock, the command will fail with an appropriate error message.
    //----------------------------------------------------------------------
    eCommandTryTargetAPILock = (1u << 5),
    //----------------------------------------------------------------------
    // eCommandProcessMustBeLaunched
    //
    // Verifies that there is a launched process in m_exe_ctx, if there isn't,
    // the command will fail with an appropriate error message.
    //----------------------------------------------------------------------
    eCommandProcessMustBeLaunched = (1u << 6),
    //----------------------------------------------------------------------
    // eCommandProcessMustBePaused
    //
    // Verifies that there is a paused process in m_exe_ctx, if there isn't,
    // the command will fail with an appropriate error message.
    //----------------------------------------------------------------------
    eCommandProcessMustBePaused = (1u << 7)};

//----------------------------------------------------------------------
// Whether a summary should cap how much data it returns to users or not
//----------------------------------------------------------------------
enum TypeSummaryCapping {
  eTypeSummaryCapped = true,
  eTypeSummaryUncapped = false
};
} // namespace lldb

#endif // LLDB_lldb_enumerations_h_