| // Test the driver's control over the PIC behavior. These consist of tests of |
| // the relocation model flags and the pic level flags passed to CC1. |
| // |
| // CHECK-NO-PIC: "-mrelocation-model" "static" |
| // CHECK-NO-PIC-NOT: "-pic-level" |
| // CHECK-NO-PIC-NOT: "-pic-is-pie" |
| // |
| // CHECK-PIC1: "-mrelocation-model" "pic" |
| // CHECK-PIC1: "-pic-level" "1" |
| // CHECK-PIC1-NOT: "-pic-is-pie" |
| // |
| // CHECK-PIC2: "-mrelocation-model" "pic" |
| // CHECK-PIC2: "-pic-level" "2" |
| // CHECK-PIC2-NOT: "-pic-is-pie" |
| // |
| // CHECK-STATIC: "-static" |
| // CHECK-NO-STATIC-NOT: "-static" |
| // |
| // CHECK-PIE1: "-mrelocation-model" "pic" |
| // CHECK-PIE1: "-pic-level" "1" |
| // CHECK-PIE1: "-pic-is-pie" |
| // |
| // CHECK-PIE2: "-mrelocation-model" "pic" |
| // CHECK-PIE2: "-pic-level" "2" |
| // CHECK-PIE2: "-pic-is-pie" |
| // |
| // CHECK-PIE-LD: "{{.*}}ld{{(.exe)?}}" |
| // CHECK-PIE-LD: "-pie" |
| // CHECK-PIE-LD: "Scrt1.o" "crti.o" "crtbeginS.o" |
| // CHECK-PIE-LD: "crtendS.o" "crtn.o" |
| // |
| // CHECK-NOPIE-LD: "-nopie" |
| // |
| // CHECK-DYNAMIC-NO-PIC-32: "-mrelocation-model" "dynamic-no-pic" |
| // CHECK-DYNAMIC-NO-PIC-32-NOT: "-pic-level" |
| // CHECK-DYNAMIC-NO-PIC-32-NOT: "-pic-is-pie" |
| // |
| // CHECK-DYNAMIC-NO-PIC-64: "-mrelocation-model" "dynamic-no-pic" |
| // CHECK-DYNAMIC-NO-PIC-64: "-pic-level" "2" |
| // CHECK-DYNAMIC-NO-PIC-64-NOT: "-pic-is-pie" |
| // |
| // CHECK-NON-DARWIN-DYNAMIC-NO-PIC: error: unsupported option '-mdynamic-no-pic' for target 'i386-unknown-unknown' |
| // |
| // CHECK-NO-PIE-NOT: "-pie" |
| // |
| // CHECK-NO-UNUSED-ARG-NOT: argument unused during compilation |
| // |
| // RUN: %clang -c %s -target i386-unknown-unknown -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC |
| // RUN: %clang -c %s -target i386-unknown-unknown -fpic -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIC1 |
| // RUN: %clang -c %s -target i386-unknown-unknown -fPIC -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIC2 |
| // RUN: %clang -c %s -target i386-unknown-unknown -fpie -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE1 |
| // RUN: %clang -c %s -target i386-unknown-unknown -fPIE -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE2 |
| // |
| // Check that PIC and PIE flags obey last-match-wins. If the last flag is |
| // a no-* variant, regardless of which variant or which flags precede it, we |
| // get no PIC. |
| // RUN: %clang -c %s -target i386-unknown-unknown -fpic -fno-pic -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC |
| // RUN: %clang -c %s -target i386-unknown-unknown -fPIC -fno-pic -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC |
| // RUN: %clang -c %s -target i386-unknown-unknown -fpie -fno-pic -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC |
| // RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fno-pic -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC |
| // RUN: %clang -c %s -target i386-unknown-unknown -fpic -fno-PIC -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC |
| // RUN: %clang -c %s -target i386-unknown-unknown -fPIC -fno-PIC -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC |
| // RUN: %clang -c %s -target i386-unknown-unknown -fpie -fno-PIC -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC |
| // RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fno-PIC -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC |
| // RUN: %clang -c %s -target i386-unknown-unknown -fpic -fno-pie -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC |
| // RUN: %clang -c %s -target i386-unknown-unknown -fPIC -fno-pie -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC |
| // RUN: %clang -c %s -target i386-unknown-unknown -fpie -fno-pie -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC |
| // RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fno-pie -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC |
| // RUN: %clang -c %s -target i386-unknown-unknown -fpic -fno-PIE -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC |
| // RUN: %clang -c %s -target i386-unknown-unknown -fPIC -fno-PIE -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC |
| // RUN: %clang -c %s -target i386-unknown-unknown -fpie -fno-PIE -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC |
| // RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fno-PIE -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC |
| // |
| // Last-match-wins where both pic and pie are specified. |
| // RUN: %clang -c %s -target i386-unknown-unknown -fpie -fpic -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIC1 |
| // RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fpic -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIC1 |
| // RUN: %clang -c %s -target i386-unknown-unknown -fpie -fPIC -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIC2 |
| // RUN: %clang -c %s -target i386-unknown-unknown -fPIE -fPIC -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIC2 |
| // RUN: %clang -c %s -target i386-unknown-unknown -fpic -fpie -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE1 |
| // RUN: %clang -c %s -target i386-unknown-unknown -fPIC -fpie -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE1 |
| // RUN: %clang -c %s -target i386-unknown-unknown -fpic -fPIE -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE2 |
| // RUN: %clang -c %s -target i386-unknown-unknown -fPIC -fPIE -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE2 |
| // |
| // Last-match-wins when selecting level 1 vs. level 2. |
| // RUN: %clang -c %s -target i386-unknown-unknown -fpic -fPIC -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIC2 |
| // RUN: %clang -c %s -target i386-unknown-unknown -fPIC -fpic -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIC1 |
| // RUN: %clang -c %s -target i386-unknown-unknown -fpic -fPIE -fpie -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE1 |
| // RUN: %clang -c %s -target i386-unknown-unknown -fpie -fPIC -fPIE -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE2 |
| // |
| // Make sure -pie is passed to along to ld and that the right *crt* files |
| // are linked in. |
| // RUN: %clang %s -target i386-unknown-freebsd -fPIE -pie -### \ |
| // RUN: --gcc-toolchain="" -rtlib=platform \ |
| // RUN: --sysroot=%S/Inputs/basic_freebsd_tree 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE-LD |
| // RUN: %clang %s -target i386-linux-gnu -fPIE -pie -### \ |
| // RUN: --gcc-toolchain="" -rtlib=platform \ |
| // RUN: --sysroot=%S/Inputs/basic_linux_tree 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE-LD |
| // RUN: %clang %s -target i386-linux-gnu -fPIC -pie -### \ |
| // RUN: --gcc-toolchain="" -rtlib=platform \ |
| // RUN: --sysroot=%S/Inputs/basic_linux_tree 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE-LD |
| // |
| // Disregard any of the PIC-specific flags if we have a trump-card flag. |
| // RUN: %clang -c %s -target i386-unknown-unknown -mkernel -fPIC -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC |
| |
| // The -static argument *doesn't* override PIC: -static only affects |
| // linking, and -fPIC only affects code generation. |
| // RUN: %clang -c %s -target i386-unknown-unknown -static -fPIC -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIC2 |
| // RUN: %clang %s -target i386-linux-gnu -static -fPIC -### \ |
| // RUN: --gcc-toolchain="" \ |
| // RUN: --sysroot=%S/Inputs/basic_linux_tree 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-STATIC |
| // |
| // On Linux, disregard -pie if we have -shared. |
| // RUN: %clang %s -target i386-unknown-linux -shared -pie -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIE |
| // |
| // On Musl Linux, PIE is enabled by default, but can be disabled. |
| // RUN: %clang -c %s -target x86_64-linux-musl -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE2 |
| // RUN: %clang -c %s -target i686-linux-musl -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE2 |
| // RUN: %clang -c %s -target armv6-linux-musleabihf -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE2 |
| // RUN: %clang -c %s -target armv7-linux-musleabihf -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE2 |
| // RUN: %clang %s -target x86_64-linux-musl -nopie -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIE |
| // RUN: %clang %s -target x86_64-linux-musl -pie -nopie -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIE |
| // RUN: %clang %s -target x86_64-linux-musl -nopie -pie -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE2 |
| // |
| // Darwin is a beautiful and unique snowflake when it comes to these flags. |
| // When targeting a 32-bit darwin system, only level 2 is supported. On 64-bit |
| // targets, there is simply nothing you can do, there is no PIE, there is only |
| // PIC when it comes to compilation. |
| // RUN: %clang -c %s -target i386-apple-darwin -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIC2 |
| // RUN: %clang -c %s -target i386-apple-darwin -fpic -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIC2 |
| // RUN: %clang -c %s -target i386-apple-darwin -fPIC -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIC2 |
| // RUN: %clang -c %s -target i386-apple-darwin -fpie -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE2 |
| // RUN: %clang -c %s -target i386-apple-darwin -fPIE -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE2 |
| // RUN: %clang -c %s -target i386-apple-darwin -fno-PIC -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC |
| // RUN: %clang -c %s -target i386-apple-darwin -fno-PIE -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC |
| // RUN: %clang -c %s -target i386-apple-darwin -fno-PIC -fpic -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIC2 |
| // RUN: %clang -c %s -target i386-apple-darwin -fno-PIC -fPIE -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE2 |
| // RUN: %clang -c %s -target x86_64-apple-darwin -fno-PIC -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIC2 |
| // RUN: %clang -c %s -target x86_64-apple-darwin -fno-PIE -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIC2 |
| // RUN: %clang -c %s -target x86_64-apple-darwin -fpic -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIC2 |
| // RUN: %clang -c %s -target x86_64-apple-darwin -fPIE -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIC2 |
| // RUN: %clang -c %s -target x86_64-apple-darwin -fPIC -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-UNUSED-ARG |
| // |
| // Darwin gets even more special with '-mdynamic-no-pic'. This flag is only |
| // valid on Darwin, and it's behavior is very strange but needs to remain |
| // consistent for compatibility. |
| // RUN: %clang -c %s -target i386-unknown-unknown -mdynamic-no-pic -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NON-DARWIN-DYNAMIC-NO-PIC |
| // RUN: %clang -c %s -target i386-apple-darwin -mdynamic-no-pic -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-DYNAMIC-NO-PIC-32 |
| // RUN: %clang -c %s -target i386-apple-darwin -mdynamic-no-pic -fno-pic -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-DYNAMIC-NO-PIC-32 |
| // RUN: %clang -c %s -target i386-apple-darwin -mdynamic-no-pic -fpie -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-DYNAMIC-NO-PIC-32 |
| // RUN: %clang -c %s -target x86_64-apple-darwin -mdynamic-no-pic -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-DYNAMIC-NO-PIC-64 |
| // RUN: %clang -c %s -target x86_64-apple-darwin -mdynamic-no-pic -fno-pic -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-DYNAMIC-NO-PIC-64 |
| // RUN: %clang -c %s -target x86_64-apple-darwin -mdynamic-no-pic -fpie -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-DYNAMIC-NO-PIC-64 |
| // |
| // Checks for ARM+Apple+IOS including -fapple-kext, -mkernel, and iphoneos |
| // version boundaries. |
| // RUN: %clang -c %s -target armv7-apple-ios6 -fapple-kext -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIC2 |
| // RUN: %clang -c %s -target armv7-apple-ios6 -mkernel -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIC2 |
| // RUN: %clang -c %s -target arm64-apple-ios7 -mkernel -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIC2 |
| // RUN: %clang -x assembler -c %s -target arm64-apple-ios7 -mkernel -no-integrated-as -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-STATIC |
| // RUN: %clang -c %s -target armv7k-apple-watchos1 -fapple-kext -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIC2 |
| // RUN: %clang -c %s -target armv7-apple-ios5 -fapple-kext -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC |
| // RUN: %clang -c %s -target armv7-apple-ios6 -fapple-kext -static -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC |
| // RUN: %clang -c %s -target armv7-apple-unknown-macho -static -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC |
| // |
| // On OpenBSD, PIE is enabled by default, but can be disabled. |
| // RUN: %clang -c %s -target amd64-pc-openbsd -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE1 |
| // RUN: %clang -c %s -target i386-pc-openbsd -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE1 |
| // RUN: %clang -c %s -target aarch64-unknown-openbsd -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE1 |
| // RUN: %clang -c %s -target arm-unknown-openbsd -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE1 |
| // RUN: %clang -c %s -target mips64-unknown-openbsd -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE1 |
| // RUN: %clang -c %s -target mips64el-unknown-openbsd -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE1 |
| // RUN: %clang -c %s -target powerpc-unknown-openbsd -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE2 |
| // RUN: %clang -c %s -target sparc-unknown-openbsd -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE2 |
| // RUN: %clang -c %s -target sparc64-unknown-openbsd -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE2 |
| // RUN: %clang -c %s -target i386-pc-openbsd -fno-pie -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC |
| // |
| // On OpenBSD, -nopie needs to be passed through to the linker. |
| // RUN: %clang %s -target i386-pc-openbsd -nopie -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NOPIE-LD |
| // Try with the alias |
| // RUN: %clang %s -target i386-pc-openbsd -no-pie -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NOPIE-LD |
| // |
| // On Android PIC is enabled by default, and PIE is enabled by default starting |
| // with API16. |
| // RUN: %clang -c %s -target i686-linux-android -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIC2 |
| // RUN: %clang -c %s -target i686-linux-android14 -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIC2 |
| // RUN: %clang -c %s -target i686-linux-android16 -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE2 |
| // RUN: %clang -c %s -target i686-linux-android24 -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE2 |
| // |
| // RUN: %clang -c %s -target arm-linux-androideabi -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIC1 |
| // RUN: %clang -c %s -target arm-linux-androideabi14 -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIC1 |
| // RUN: %clang -c %s -target arm-linux-androideabi16 -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE2 |
| // RUN: %clang -c %s -target arm-linux-androideabi24 -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE2 |
| // |
| // RUN: %clang -c %s -target mipsel-linux-android -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIC1 |
| // RUN: %clang -c %s -target mipsel-linux-android14 -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIC1 |
| // RUN: %clang -c %s -target mipsel-linux-android16 -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE1 |
| // RUN: %clang -c %s -target mipsel-linux-android24 -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE1 |
| // |
| // 64-bit Android targets are always PIE. |
| // RUN: %clang -c %s -target aarch64-linux-android -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE2 |
| // RUN: %clang -c %s -target aarch64-linux-android24 -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE2 |
| // RUN: %clang -c %s -target arm64-linux-android -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE2 |
| // |
| // Default value of PIE can be overwritten, even on 64-bit targets. |
| // RUN: %clang -c %s -target arm-linux-androideabi -fPIE -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE2 |
| // RUN: %clang -c %s -target i686-linux-android14 -fPIE -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIE2 |
| // RUN: %clang -c %s -target i686-linux-android16 -fno-PIE -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC |
| // RUN: %clang -c %s -target aarch64-linux-android -fno-PIE -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC |
| // RUN: %clang -c %s -target aarch64-linux-android24 -fno-PIE -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-NO-PIC |
| // |
| // On Windows-X64 PIC is enabled by default |
| // RUN: %clang -c %s -target x86_64-pc-windows-msvc18.0.0 -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIC2 |
| // RUN: %clang -c %s -target x86_64-pc-windows-gnu -### 2>&1 \ |
| // RUN: | FileCheck %s --check-prefix=CHECK-PIC2 |
